Description
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Do not RPM complete unrelated subtrees on unplug
When a Thunderbolt device is unplugged, that switch and every switch
subsequent to it on the bus device list is `complete()`d, not just its
child devices. In the case of multiple domains, it may cause, eg, an
attempt to `complete()` the uninitialized domain 1 root switch RPM
completion on unplug of a switch from domain 0 (though ordering is not
guaranteed numerically sorted).
I initially noticed this issue on a Dell XPS9720 when the system would
seem to sporadically not wake after unplugging a Thunderbolt dock. I
tried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if
that resolved the issue, but the issue persisted. Eventually I found
that I could consistently generate a kernel Oops reporting a page fault
at 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went
bug hunting. I became suspicious of the `bus_for_each_dev()` walk that I
ultimately ended up changing. To confirm this issue, I did an eBPF trace
of `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while
unplugging in a variety of situations and found that an unplug from
domain 0 tries to `complete_rpm()` domain 1's switch, whose RPM
completion is not initialized and thus is holding a null wait-list
pointer, triggering the page fault.
Here are the key sections of that eBPF trace. Note that HEAD denotes the
completion's own wait-list HEAD:
```
RESCAN_ENTER domain=0
COMPLETE rescan_domain=0 target=0-1 target_domain=0
route=0x1 parent=0-0 unplugged=1
COMPLETION done=0 head=HEAD next=HEAD prev=HEAD
BUS_WALK domain=0 start=0-1 callback=complete_rpm
CALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1
COMPLETE rescan_domain=0 target=1-0 target_domain=1
route=0x0 parent=domain1 unplugged=0
COMPLETION done=0 head=HEAD next=0 prev=0
complete+5
complete_rpm+43
bus_for_each_dev+133
icm_free_unplugged_children+250
icm_rescan_work+42
```
This patch gates the `complete()` on an additional condition - that the
Thunderbolt domain matches the domain of the device that was unplugged.
I only have a single system with multiple Thunderbolt domains - the Dell
XPS9720. I am consistently able to reproduce the Oops on that system.
Since running with this patch, I have not seen the Oops reoccur. I have
also tested it on a Thinkpad X1-Gen12, and that system boots and runs
well with it, but it only has a single Thunderbolt domain, so it does
not exercise the multi-domain failure case.
thunderbolt: Do not RPM complete unrelated subtrees on unplug
When a Thunderbolt device is unplugged, that switch and every switch
subsequent to it on the bus device list is `complete()`d, not just its
child devices. In the case of multiple domains, it may cause, eg, an
attempt to `complete()` the uninitialized domain 1 root switch RPM
completion on unplug of a switch from domain 0 (though ordering is not
guaranteed numerically sorted).
I initially noticed this issue on a Dell XPS9720 when the system would
seem to sporadically not wake after unplugging a Thunderbolt dock. I
tried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if
that resolved the issue, but the issue persisted. Eventually I found
that I could consistently generate a kernel Oops reporting a page fault
at 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went
bug hunting. I became suspicious of the `bus_for_each_dev()` walk that I
ultimately ended up changing. To confirm this issue, I did an eBPF trace
of `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while
unplugging in a variety of situations and found that an unplug from
domain 0 tries to `complete_rpm()` domain 1's switch, whose RPM
completion is not initialized and thus is holding a null wait-list
pointer, triggering the page fault.
Here are the key sections of that eBPF trace. Note that HEAD denotes the
completion's own wait-list HEAD:
```
RESCAN_ENTER domain=0
COMPLETE rescan_domain=0 target=0-1 target_domain=0
route=0x1 parent=0-0 unplugged=1
COMPLETION done=0 head=HEAD next=HEAD prev=HEAD
BUS_WALK domain=0 start=0-1 callback=complete_rpm
CALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1
COMPLETE rescan_domain=0 target=1-0 target_domain=1
route=0x0 parent=domain1 unplugged=0
COMPLETION done=0 head=HEAD next=0 prev=0
complete+5
complete_rpm+43
bus_for_each_dev+133
icm_free_unplugged_children+250
icm_rescan_work+42
```
This patch gates the `complete()` on an additional condition - that the
Thunderbolt domain matches the domain of the device that was unplugged.
I only have a single system with multiple Thunderbolt domains - the Dell
XPS9720. I am consistently able to reproduce the Oops on that system.
Since running with this patch, I have not seen the Oops reoccur. I have
also tested it on a Thinkpad X1-Gen12, and that system boots and runs
well with it, but it only has a single Thunderbolt domain, so it does
not exercise the multi-domain failure case.
Published:
2026-11-19
Score:
n/a
EPSS:
n/a
KEV:
No
Analysis and contextual insights are available on OpenCVE Cloud.
Remediation
No vendor fix or workaround currently provided.
Additional remediation guidance may be available on OpenCVE Cloud.
Tracking
Sign in to view the affected projects.
Advisories
No advisories yet.
References
History
Thu, 19 Nov 2026 15:00:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Do not RPM complete unrelated subtrees on unplug When a Thunderbolt device is unplugged, that switch and every switch subsequent to it on the bus device list is `complete()`d, not just its child devices. In the case of multiple domains, it may cause, eg, an attempt to `complete()` the uninitialized domain 1 root switch RPM completion on unplug of a switch from domain 0 (though ordering is not guaranteed numerically sorted). I initially noticed this issue on a Dell XPS9720 when the system would seem to sporadically not wake after unplugging a Thunderbolt dock. I tried multiple kernel versions including v7.2.7 and v7.3-rc4 to see if that resolved the issue, but the issue persisted. Eventually I found that I could consistently generate a kernel Oops reporting a page fault at 0xffff_ffff_ffff_fff8 on unplug from one side of the laptop and went bug hunting. I became suspicious of the `bus_for_each_dev()` walk that I ultimately ended up changing. To confirm this issue, I did an eBPF trace of `bus_for_each_dev()`, `complete_rpm()`, and `complete()` while unplugging in a variety of situations and found that an unplug from domain 0 tries to `complete_rpm()` domain 1's switch, whose RPM completion is not initialized and thus is holding a null wait-list pointer, triggering the page fault. Here are the key sections of that eBPF trace. Note that HEAD denotes the completion's own wait-list HEAD: ``` RESCAN_ENTER domain=0 COMPLETE rescan_domain=0 target=0-1 target_domain=0 route=0x1 parent=0-0 unplugged=1 COMPLETION done=0 head=HEAD next=HEAD prev=HEAD BUS_WALK domain=0 start=0-1 callback=complete_rpm CALLBACK_ENTER rescan_domain=0 dev=1-0 parent=domain1 is_switch=1 COMPLETE rescan_domain=0 target=1-0 target_domain=1 route=0x0 parent=domain1 unplugged=0 COMPLETION done=0 head=HEAD next=0 prev=0 complete+5 complete_rpm+43 bus_for_each_dev+133 icm_free_unplugged_children+250 icm_rescan_work+42 ``` This patch gates the `complete()` on an additional condition - that the Thunderbolt domain matches the domain of the device that was unplugged. I only have a single system with multiple Thunderbolt domains - the Dell XPS9720. I am consistently able to reproduce the Oops on that system. Since running with this patch, I have not seen the Oops reoccur. I have also tested it on a Thinkpad X1-Gen12, and that system boots and runs well with it, but it only has a single Thunderbolt domain, so it does not exercise the multi-domain failure case. | |
| Title | thunderbolt: Do not RPM complete unrelated subtrees on unplug | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-11-19T14:45:08.097Z
Reserved: 2026-09-25T10:25:14.421Z
Link: CVE-2026-99547
No data.
Status : Received
Published: 2026-11-19T15:18:10.910
Modified: 2026-11-19T15:18:10.910
Link: CVE-2026-99547
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.