Export limit exceeded: 94638 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (94638 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-107759 | 2026-11-01 | 7.2 High | ||
| The WPO365 | MICROSOFT 365 GRAPH MAILER plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'Subject (via wp_mail/PHPMailer, e.g. CF7 your-subject)' parameter in all versions up to, and including, 6.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The payload is stored without authentication via any mail-sending feature that forwards a submitter-controlled subject (e.g. a Contact Form 7 form) when the Graph Mailer is enabled but OAuth authorization has not been completed, a default state immediately after plugin activation. | ||||
| CVE-2026-107750 | 2 Wordpress-extensions, Wpovernight | 2 Pdf Invoices & Packing Slips For Woocommerce, Pdf Invoices & Packing Slips For Woocommerce | 2026-11-01 | 7.2 High |
| The PDF Invoices & Packing Slips for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'billing_address.first_name / last_name / company, customer_note' parameter in all versions up to, and including, 5.16.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is an incomplete fix for CVE-2026-92244: the wp_kses() allow-list introduced in 5.16.2 correctly blocks raw-tag payloads but is bypassed by entity-encoded payloads (e.g., <img onerror=…>) that contain no literal angle-bracket characters and are therefore passed through unmodified before the trailing decode rematerializes them. | ||||
| CVE-2026-107711 | 2026-11-01 | 6.4 Medium | ||
| The FlexStock – Product Stock Sync with Google Sheets for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'products[].post_content' parameter in all versions up to, and including, 3.17.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is exploitable by any Subscriber-level user because the plugin's admin_enqueue_scripts callback exposes the REST bearer token in the Dashboard page source via wp_localize_script() without a capability check, and the REST endpoint's permission_callback validates only that bearer token rather than performing a current_user_can() capability check. | ||||
| CVE-2026-107653 | 2 Surecart, Wordpress-extensions | 2 Surecart, Surecart | 2026-11-01 | 7.2 High |
| The SureCart – Ecommerce Made Easy For Selling Physical Products, Digital Downloads, Subscriptions, Donations, & Payments plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'comment' parameter in all versions up to, and including, 4.9.4 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful execution requires the injected comment to be visible on a page that loads SureCart's web-component bundle (e.g. a page containing a SureCart Buy Button block), and the comment must be auto-approved or approved by a moderator. | ||||
| CVE-2026-104926 | 2026-11-01 | 6.1 Medium | ||
| The WooCommerce Extra Product Options Pro plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the '<fieldname>_start / <fieldname>_end' parameter in all versions up to, and including, 3.3.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. This vulnerability is only exploitable on product pages where a Date & Time Range Picker extra field is configured, though the required field name is visible in the product page source and requires no prior knowledge to discover. | ||||
| CVE-2026-103962 | 2026-11-01 | 6.1 Medium | ||
| The User Frontend – Membership, User Registration, User Profile, User Directory & Content Restriction with Frontend Post Submission plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'field_attr[required]' parameter in all versions up to, and including, 4.3.13 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. The nonce check on the wpuf_get_child_cat AJAX action is not an effective security barrier because the wpuf_nonce value is publicly localized to every anonymous visitor of any page containing a WPUF shortcode, making it freely harvestable by an unauthenticated attacker. | ||||
| CVE-2026-100151 | 2026-11-01 | 6.1 Medium | ||
| The Ninja Forms – Contact Form Builder with Calculators, Quizzes, Signatures & AI Form Builder plugin for WordPress is vulnerable to Reflected DOM-Based Cross-Site Scripting via 'querystring:<key>' URL Parameter in all versions up to, and including, 3.15.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. This bypass is triggered when an attacker supplies a matching field:<key> URL parameter that causes the server to fully resolve the {field:*} placeholder, forcing the client-side else-branch to abandon the server-sanitized value and reconstruct field content from the raw query string. | ||||
| CVE-2026-15567 | 1 Redhat | 8 Fuse, Jboss Enterprise Application Platform, Jboss Enterprise Application Platform Els and 5 more | 2026-11-01 | 7.5 High |
| A flaw was found in Wildfly. A remote unauthenticated attacker can trigger OutOfMemoryError as CSIv2Util's GSS token decoder reads an attacker-controlled length field without bounds checking and attempts to allocate a byte array of that size. | ||||
| CVE-2026-15561 | 1 Redhat | 4 Jboss Enterprise Application Platform, Jboss Enterprise Application Platform Els, Jboss Enterprise Application Platform Expansion Pack and 1 more | 2026-11-01 | 7.5 High |
| A flaw was found in EAP's undertow http/1.1 chunked-transfer decoder. missing limits on size and count would allow an attacker to use an unauthenticated connection to drive the JVM to an OutOfMemory error, stopping all deployments on the listener, and achieving Denial of Service. | ||||
| CVE-2026-99164 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-31 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: imx: fix slab corruption from undersized DMA bounce buffers Since commit faa8e404ad8e ("spi: imx: support dynamic burst length for ECSPI DMA mode"), the driver allocates its private DMA TX/RX buffers with kzalloc(dma_len), where dma_len is only rounded up to 4 bytes, but maps, syncs and unmaps them with DMA_CACHE_ALIGNED_LEN(dma_len), i.e. rounded up to the cache line size. As a result, the DMA API operates on memory beyond the end of the allocation. This was observed on a custom i.MX8MP platform with an mcp251xfd CAN controller under heavy RPMSG load, as a series of refcount_t warnings triggered from rpmsg_recv_done() in virtio_rpmsg_bus: refcount_t: addition on 0; use-after-free. refcount_t: underflow; use-after-free. refcount_t: saturated; leaking memory. Leading finally to an "Unable to handle kernel paging request" oops. Reproducing this problem took between 30 minutes and roughly 30 hours under the same workload. Hardware watchpoints on the refcount of a struct rpmsg_endpoint showed it was overwritten from 2 to 1 by __pi_memcpy_generic() in the irq/155-spi2.0 thread. Additionally it was found that a "normal" rpmsg_recv_done() took 11µs +/-2µs from its kref_get to kref_put. In the error case the same sequence took about 215µs +/-10µs. Based on this, an LLM was used to identify the size mismatch fixed here. Allocate the buffers with DMA_CACHE_ALIGNED_LEN(dma_len) so they cover the full mapped length, and use the same length for dma_sync_single_for_cpu() to stay consistent with map and unmap. With this patch applied, the same workload ran for more than 200 hours without the problem reproducing. | ||||
| CVE-2026-113380 | 1 Signal | 1 Ringrtc | 2026-10-31 | N/A |
| In the RingRTC library before 2.72.0 for Signal, a peer that saturates a call's FSM queue can interfere with the ability of a local hangup to tear the call (with its audio and perhaps also video track) down. | ||||
| CVE-2026-119250 | 1 Ubiquiti | 1 Wifiman Desktop For Macos | 2026-10-31 | 7.8 High |
| A malicious actor with local access and low privileges could exploit an External Control of File Name or Path vulnerability found in WiFiman Desktop to execute arbitrary commands with root privileges on the host device. | ||||
| CVE-2026-111505 | 1 Dell | 1 Openmanage Enterprise | 2026-10-31 | 8.8 High |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. | ||||
| CVE-2026-101210 | 1 Dell | 1 Openmanage Enterprise | 2026-10-31 | 7.2 High |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. | ||||
| CVE-2026-101214 | 1 Dell | 1 Openmanage Enterprise | 2026-10-31 | 7.2 High |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. | ||||
| CVE-2026-99143 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-31 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the predicate limit separate from program capacity predicate_parse() adds two to nr_preds to reserve the terminal TRUE and FALSE entries. It also uses that increased value as the limit for parsed predicates. If the initial count is smaller than the number actually parsed, the program can fill the allocation and subsequent accesses can go past its end. Keep nr_preds as the predicate limit and use a separate value for the allocation size. This leaves space for both terminal entries and a zeroed entry when parsing stops at the limit. | ||||
| CVE-2026-99110 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-31 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in cifs_do_set_acl() cifs_set_acl() validates ACL size using posix_acl_xattr_size(): 4 + (count * 8) // 4-byte header + 8 bytes per ACE cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS wire format into the same buffer: 6 + (count * 10) // 6-byte header + 10 bytes per ACE An ACL that passes the xattr-based check in cifs_set_acl() can overflow the heap when posix_acl_to_cifs() writes the larger CIFS format. Validate the CIFS format size against the remaining buffer space and USHRT_MAX before converting--data_count is __u16, so sizes above USHRT_MAX truncate the on-wire packet length, causing the server to apply a partial ACL. Replace MaxDataCount = 1000 with min(CIFSMaxBufSize, USHRT_MAX). | ||||
| CVE-2026-99142 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-31 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Check operator stack capacity before pushing predicate_parse() uses the first operator stack entry before processing any opening parentheses. A push then increments top before writing. The existing check still permits that write when top already points to the last allocated entry, which can access beyond the operator stack. Reject the push when top reaches the last allocated entry. | ||||
| CVE-2026-99131 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-31 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix capability check in xfs An user reported a bug where he managed to evade group's quota by changing a file's gid to a different group id the same user belonged to, even though quotas were enforced on both gids and the file's size was big enough to exceed the quota's hardlimit. Commit eba0549bc7d1 replaced a capable() call by a has_capability_noaudit() to prevent unnecessary selinux audit messages. Turns out that both calls have slightly different semantics even though their documentation seems similar. Where in a nutshell: capable() - Tests the task's effective credentials has_ns_capability_noaudit() - Tests the task's real credentials This most of the time has no practical difference but in some cases like changing attrs (specifically group id in this case) through a NFS client this will allow the quota code to use XFS_QMOPT_FORCE_RES, effectively bypassing quota accounting checks. Using instead ns_capable_noaudit() should fix this issue and prevent selinux audit messages. This also fix the remaining calls to has_capability_noaudit() | ||||
| CVE-2026-99107 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-31 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize(). When the attribute is in an extent record, ctx->mrec points to the extent but the function receives the base record pointer m, causing incorrect size calculations in memmove. Fix by passing ctx->mrec (the actual MFT record containing the attribute) instead of m (the base MFT record) to ntfs_attr_record_resize(). | ||||