Export limit exceeded: 26160 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26160 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54278 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vmem: split pages when debug pagealloc is enabled Since commit bb1520d581a3 ("s390/mm: start kernel with DAT enabled") the kernel crashes early during boot when debug pagealloc is enabled: mem auto-init: stack:off, heap alloc:off, heap free:off addressing exception: 0005 ilc:2 [#1] SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-09759-gc5666c912155 #630 [..] Krnl Code: 00000000001325f6: ec5600248064 cgrj %r5,%r6,8,000000000013263e 00000000001325fc: eb880002000c srlg %r8,%r8,2 #0000000000132602: b2210051 ipte %r5,%r1,%r0,0 >0000000000132606: b90400d1 lgr %r13,%r1 000000000013260a: 41605008 la %r6,8(%r5) 000000000013260e: a7db1000 aghi %r13,4096 0000000000132612: b221006d ipte %r6,%r13,%r0,0 0000000000132616: e3d0d0000171 lay %r13,4096(%r13) Call Trace: __kernel_map_pages+0x14e/0x320 __free_pages_ok+0x23a/0x5a8) free_low_memory_core_early+0x214/0x2c8 memblock_free_all+0x28/0x58 mem_init+0xb6/0x228 mm_core_init+0xb6/0x3b0 start_kernel+0x1d2/0x5a8 startup_continue+0x36/0x40 Kernel panic - not syncing: Fatal exception: panic_on_oops This is caused by using large mappings on machines with EDAT1/EDAT2. Add the code to split the mappings into 4k pages if debug pagealloc is enabled by CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT or the debug_pagealloc kernel command line option. | ||||
| CVE-2023-54277 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: Fix endpoint check The syzbot fuzzer detected a problem in the udlfb driver, caused by an endpoint not having the expected type: usb 1-1: Read EDID byte 0 failed: -71 usb 1-1: Unable to get valid EDID from device/display ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: <TASK> dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315 dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111 dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743 The current approach for this issue failed to catch the problem because it only checks for the existence of a bulk-OUT endpoint; it doesn't check whether this endpoint is the one that the driver will actually use. We can fix the problem by instead checking that the endpoint used by the driver does exist and is bulk-OUT. | ||||
| CVE-2023-54276 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: move init of percpu reply_cache_stats counters back to nfsd_init_net Commit f5f9d4a314da ("nfsd: move reply cache initialization into nfsd startup") moved the initialization of the reply cache into nfsd startup, but didn't account for the stats counters, which can be accessed before nfsd is ever started. The result can be a NULL pointer dereference when someone accesses /proc/fs/nfsd/reply_cache_stats while nfsd is still shut down. This is a regression and a user-triggerable oops in the right situation: - non-x86_64 arch - /proc/fs/nfsd is mounted in the namespace - nfsd is not started in the namespace - unprivileged user calls "cat /proc/fs/nfsd/reply_cache_stats" Although this is easy to trigger on some arches (like aarch64), on x86_64, calling this_cpu_ptr(NULL) evidently returns a pointer to the fixed_percpu_data. That struct looks just enough like a newly initialized percpu var to allow nfsd_reply_cache_stats_show to access it without Oopsing. Move the initialization of the per-net+per-cpu reply-cache counters back into nfsd_init_net, while leaving the rest of the reply cache allocations to be done at nfsd startup time. Kudos to Eirik who did most of the legwork to track this down. | ||||
| CVE-2023-54320 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: pmc: Fix memory leak in amd_pmc_stb_debugfs_open_v2() Function amd_pmc_stb_debugfs_open_v2() may be called when the STB debug mechanism enabled. When amd_pmc_send_cmd() fails, the 'buf' needs to be released. | ||||
| CVE-2023-54274 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Add a check for valid 'mad_agent' pointer When unregistering MAD agent, srpt module has a non-null check for 'mad_agent' pointer before invoking ib_unregister_mad_agent(). This check can pass if 'mad_agent' variable holds an error value. The 'mad_agent' can have an error value for a short window when srpt_add_one() and srpt_remove_one() is executed simultaneously. In srpt module, added a valid pointer check for 'sport->mad_agent' before unregistering MAD agent. This issue can hit when RoCE driver unregisters ib_device Stack Trace: ------------ BUG: kernel NULL pointer dereference, address: 000000000000004d PGD 145003067 P4D 145003067 PUD 2324fe067 PMD 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 10 PID: 4459 Comm: kworker/u80:0 Kdump: loaded Tainted: P Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.5.4 01/13/2020 Workqueue: bnxt_re bnxt_re_task [bnxt_re] RIP: 0010:_raw_spin_lock_irqsave+0x19/0x40 Call Trace: ib_unregister_mad_agent+0x46/0x2f0 [ib_core] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready ? __schedule+0x20b/0x560 srpt_unregister_mad_agent+0x93/0xd0 [ib_srpt] srpt_remove_one+0x20/0x150 [ib_srpt] remove_client_context+0x88/0xd0 [ib_core] bond0: (slave p2p1): link status definitely up, 100000 Mbps full duplex disable_device+0x8a/0x160 [ib_core] bond0: active interface up! ? kernfs_name_hash+0x12/0x80 (NULL device *): Bonding Info Received: rdev: 000000006c0b8247 __ib_unregister_device+0x42/0xb0 [ib_core] (NULL device *): Master: mode: 4 num_slaves:2 ib_unregister_device+0x22/0x30 [ib_core] (NULL device *): Slave: id: 105069936 name:p2p1 link:0 state:0 bnxt_re_stopqps_and_ib_uninit+0x83/0x90 [bnxt_re] bnxt_re_alloc_lag+0x12e/0x4e0 [bnxt_re] | ||||
| CVE-2023-54272 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix a possible null-pointer dereference in ni_clear() In a previous commit c1006bd13146, ni->mi.mrec in ni_write_inode() could be NULL, and thus a NULL check is added for this variable. However, in the same call stack, ni->mi.mrec can be also dereferenced in ni_clear(): ntfs_evict_inode(inode) ni_write_inode(inode, ...) ni = ntfs_i(inode); is_rec_inuse(ni->mi.mrec) -> Add a NULL check by previous commit ni_clear(ntfs_i(inode)) is_rec_inuse(ni->mi.mrec) -> No check Thus, a possible null-pointer dereference may exist in ni_clear(). To fix it, a NULL check is added in this function. | ||||
| CVE-2023-54267 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT lppaca_shared_proc() takes a pointer to the lppaca which is typically accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads to checking if preemption is enabled, for example: BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693 caller is lparcfg_data+0x408/0x19a0 CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2 Call Trace: dump_stack_lvl+0x154/0x200 (unreliable) check_preemption_disabled+0x214/0x220 lparcfg_data+0x408/0x19a0 ... This isn't actually a problem however, as it does not matter which lppaca is accessed, the shared proc state will be the same. vcpudispatch_stats_procfs_init() already works around this by disabling preemption, but the lparcfg code does not, erroring any time /proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled. Instead of disabling preemption on the caller side, rework lppaca_shared_proc() to not take a pointer and instead directly access the lppaca, bypassing any potential preemption checks. [mpe: Rework to avoid needing a definition in paca.h and lppaca.h] | ||||
| CVE-2023-54266 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer() 'read' is freed when it is known to be NULL, but not when a read error occurs. Revert the logic to avoid a small leak, should a m920x_read() call fail. | ||||
| CVE-2023-54265 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix an uninit variable access bug in __ip6_make_skb() Syzbot reported a bug as following: ===================================================== BUG: KMSAN: uninit-value in arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline] BUG: KMSAN: uninit-value in arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline] BUG: KMSAN: uninit-value in atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline] BUG: KMSAN: uninit-value in __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956 arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline] arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline] atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline] __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956 ip6_finish_skb include/net/ipv6.h:1122 [inline] ip6_push_pending_frames+0x10e/0x550 net/ipv6/ip6_output.c:1987 rawv6_push_pending_frames+0xb12/0xb90 net/ipv6/raw.c:579 rawv6_sendmsg+0x297e/0x2e60 net/ipv6/raw.c:922 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530 __sys_sendmsg net/socket.c:2559 [inline] __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988 kmalloc_reserve net/core/skbuff.c:492 [inline] __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565 alloc_skb include/linux/skbuff.h:1270 [inline] __ip6_append_data+0x51c1/0x6bb0 net/ipv6/ip6_output.c:1684 ip6_append_data+0x411/0x580 net/ipv6/ip6_output.c:1854 rawv6_sendmsg+0x2882/0x2e60 net/ipv6/raw.c:915 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530 __sys_sendmsg net/socket.c:2559 [inline] __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because icmp6hdr does not in skb linear region under the scenario of SOCK_RAW socket. Access icmp6_hdr(skb)->icmp6_type directly will trigger the uninit variable access bug. Use a local variable icmp6_type to carry the correct value in different scenarios. | ||||
| CVE-2023-54260 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix lost destroy smbd connection when MR allocate failed If the MR allocate failed, the smb direct connection info is NULL, then smbd_destroy() will directly return, then the connection info will be leaked. Let's set the smb direct connection info to the server before call smbd_destroy(). | ||||
| CVE-2023-54255 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sh: dma: Fix DMA channel offset calculation Various SoCs of the SH3, SH4 and SH4A family, which use this driver, feature a differing number of DMA channels, which can be distributed between up to two DMAC modules. The existing implementation fails to correctly accommodate for all those variations, resulting in wrong channel offset calculations and leading to kernel panics. Rewrite dma_base_addr() in order to properly calculate channel offsets in a DMAC module. Fix dmaor_read_reg() and dmaor_write_reg(), so that the correct DMAC module base is selected for the DMAOR register. | ||||
| CVE-2023-54246 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rcuscale: Move rcu_scale_writer() schedule_timeout_uninterruptible() to _idle() The rcuscale.holdoff module parameter can be used to delay the start of rcu_scale_writer() kthread. However, the hung-task timeout will trigger when the timeout specified by rcuscale.holdoff is greater than hung_task_timeout_secs: runqemu kvm nographic slirp qemuparams="-smp 4 -m 2048M" bootparams="rcuscale.shutdown=0 rcuscale.holdoff=300" [ 247.071753] INFO: task rcu_scale_write:59 blocked for more than 122 seconds. [ 247.072529] Not tainted 6.4.0-rc1-00134-gb9ed6de8d4ff #7 [ 247.073400] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.074331] task:rcu_scale_write state:D stack:30144 pid:59 ppid:2 flags:0x00004000 [ 247.075346] Call Trace: [ 247.075660] <TASK> [ 247.075965] __schedule+0x635/0x1280 [ 247.076448] ? __pfx___schedule+0x10/0x10 [ 247.076967] ? schedule_timeout+0x2dc/0x4d0 [ 247.077471] ? __pfx_lock_release+0x10/0x10 [ 247.078018] ? enqueue_timer+0xe2/0x220 [ 247.078522] schedule+0x84/0x120 [ 247.078957] schedule_timeout+0x2e1/0x4d0 [ 247.079447] ? __pfx_schedule_timeout+0x10/0x10 [ 247.080032] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.080591] ? __pfx_process_timeout+0x10/0x10 [ 247.081163] ? __pfx_sched_set_fifo_low+0x10/0x10 [ 247.081760] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.082287] rcu_scale_writer+0x6b1/0x7f0 [ 247.082773] ? mark_held_locks+0x29/0xa0 [ 247.083252] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.083865] ? __pfx_rcu_scale_writer+0x10/0x10 [ 247.084412] kthread+0x179/0x1c0 [ 247.084759] ? __pfx_kthread+0x10/0x10 [ 247.085098] ret_from_fork+0x2c/0x50 [ 247.085433] </TASK> This commit therefore replaces schedule_timeout_uninterruptible() with schedule_timeout_idle(). | ||||
| CVE-2022-50772 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: fix memory leak in nsim_bus_dev_new() If device_register() failed in nsim_bus_dev_new(), the value of reference in nsim_bus_dev->dev is 1. obj->name in nsim_bus_dev->dev will not be released. unreferenced object 0xffff88810352c480 (size 16): comm "echo", pid 5691, jiffies 4294945921 (age 133.270s) hex dump (first 16 bytes): 6e 65 74 64 65 76 73 69 6d 31 00 00 00 00 00 00 netdevsim1...... backtrace: [<000000005e2e5e26>] __kmalloc_node_track_caller+0x3a/0xb0 [<0000000094ca4fc8>] kvasprintf+0xc3/0x160 [<00000000aad09bcc>] kvasprintf_const+0x55/0x180 [<000000009bac868d>] kobject_set_name_vargs+0x56/0x150 [<000000007c1a5d70>] dev_set_name+0xbb/0xf0 [<00000000ad0d126b>] device_add+0x1f8/0x1cb0 [<00000000c222ae24>] new_device_store+0x3b6/0x5e0 [<0000000043593421>] bus_attr_store+0x72/0xa0 [<00000000cbb1833a>] sysfs_kf_write+0x106/0x160 [<00000000d0dedb8a>] kernfs_fop_write_iter+0x3a8/0x5a0 [<00000000770b66e2>] vfs_write+0x8f0/0xc80 [<0000000078bb39be>] ksys_write+0x106/0x210 [<00000000005e55a4>] do_syscall_64+0x35/0x80 [<00000000eaa40bbc>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 | ||||
| CVE-2025-68380 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix peer HE MCS assignment In ath11k_wmi_send_peer_assoc_cmd(), peer's transmit MCS is sent to firmware as receive MCS while peer's receive MCS sent as transmit MCS, which goes against firmwire's definition. While connecting to a misbehaved AP that advertises 0xffff (meaning not supported) for 160 MHz transmit MCS map, firmware crashes due to 0xffff is assigned to he_mcs->rx_mcs_set field. Ext Tag: HE Capabilities [...] Supported HE-MCS and NSS Set [...] Rx and Tx MCS Maps 160 MHz [...] Tx HE-MCS Map 160 MHz: 0xffff Swap the assignment to fix this issue. As the HE rate control mask is meant to limit our own transmit MCS, it needs to go via he_mcs->rx_mcs_set field. With the aforementioned swapping done, change is needed as well to apply it to the peer's receive MCS. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2023-54086 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Add preempt_count_{sub,add} into btf id deny list The recursion check in __bpf_prog_enter* and __bpf_prog_exit* leave preempt_count_{sub,add} unprotected. When attaching trampoline to them we get panic as follows, [ 867.843050] BUG: TASK stack guard page was hit at 0000000009d325cf (stack is 0000000046a46a15..00000000537e7b28) [ 867.843064] stack guard page: 0000 [#1] PREEMPT SMP NOPTI [ 867.843067] CPU: 8 PID: 11009 Comm: trace Kdump: loaded Not tainted 6.2.0+ #4 [ 867.843100] Call Trace: [ 867.843101] <TASK> [ 867.843104] asm_exc_int3+0x3a/0x40 [ 867.843108] RIP: 0010:preempt_count_sub+0x1/0xa0 [ 867.843135] __bpf_prog_enter_recur+0x17/0x90 [ 867.843148] bpf_trampoline_6442468108_0+0x2e/0x1000 [ 867.843154] ? preempt_count_sub+0x1/0xa0 [ 867.843157] preempt_count_sub+0x5/0xa0 [ 867.843159] ? migrate_enable+0xac/0xf0 [ 867.843164] __bpf_prog_exit_recur+0x2d/0x40 [ 867.843168] bpf_trampoline_6442468108_0+0x55/0x1000 ... [ 867.843788] preempt_count_sub+0x5/0xa0 [ 867.843793] ? migrate_enable+0xac/0xf0 [ 867.843829] __bpf_prog_exit_recur+0x2d/0x40 [ 867.843837] BUG: IRQ stack guard page was hit at 0000000099bd8228 (stack is 00000000b23e2bc4..000000006d95af35) [ 867.843841] BUG: IRQ stack guard page was hit at 000000005ae07924 (stack is 00000000ffd69623..0000000014eb594c) [ 867.843843] BUG: IRQ stack guard page was hit at 00000000028320f0 (stack is 00000000034b6438..0000000078d1bcec) [ 867.843842] bpf_trampoline_6442468108_0+0x55/0x1000 ... That is because in __bpf_prog_exit_recur, the preempt_count_{sub,add} are called after prog->active is decreased. Fixing this by adding these two functions into btf ids deny list. | ||||
| CVE-2025-40125 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: check kobject state_in_sysfs before deleting in blk_mq_unregister_hctx In __blk_mq_update_nr_hw_queues() the return value of blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx fails, later changing the number of hw_queues or removing disk will trigger the following warning: kernfs: can not remove 'nr_tags', no directory WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160 Call Trace: remove_files.isra.1+0x38/0xb0 sysfs_remove_group+0x4d/0x100 sysfs_remove_groups+0x31/0x60 __kobject_del+0x23/0xf0 kobject_del+0x17/0x40 blk_mq_unregister_hctx+0x5d/0x80 blk_mq_sysfs_unregister_hctxs+0x94/0xd0 blk_mq_update_nr_hw_queues+0x124/0x760 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk] nullb_device_submit_queues_store+0x92/0x120 [null_blk] kobjct_del() was called unconditionally even if sysfs creation failed. Fix it by checkig the kobject creation statusbefore deleting it. | ||||
| CVE-2023-53856 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: of: overlay: Call of_changeset_init() early When of_overlay_fdt_apply() fails, the changeset may be partially applied, and the caller is still expected to call of_overlay_remove() to clean up this partial state. However, of_overlay_apply() calls of_resolve_phandles() before init_overlay_changeset(). Hence if the overlay fails to apply due to an unresolved symbol, the overlay_changeset.cset.entries list is still uninitialized, and cleanup will crash with a NULL-pointer dereference in overlay_removal_is_ok(). Fix this by moving the call to of_changeset_init() from init_overlay_changeset() to of_overlay_fdt_apply(), where all other early initialization is done. | ||||
| CVE-2023-53728 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: posix-timers: Ensure timer ID search-loop limit is valid posix_timer_add() tries to allocate a posix timer ID by starting from the cached ID which was stored by the last successful allocation. This is done in a loop searching the ID space for a free slot one by one. The loop has to terminate when the search wrapped around to the starting point. But that's racy vs. establishing the starting point. That is read out lockless, which leads to the following problem: CPU0 CPU1 posix_timer_add() start = sig->posix_timer_id; lock(hash_lock); ... posix_timer_add() if (++sig->posix_timer_id < 0) start = sig->posix_timer_id; sig->posix_timer_id = 0; So CPU1 can observe a negative start value, i.e. -1, and the loop break never happens because the condition can never be true: if (sig->posix_timer_id == start) break; While this is unlikely to ever turn into an endless loop as the ID space is huge (INT_MAX), the racy read of the start value caught the attention of KCSAN and Dmitry unearthed that incorrectness. Rewrite it so that all id operations are under the hash lock. | ||||
| CVE-2023-54181 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix issue in verifying allow_ptr_leaks After we converted the capabilities of our networking-bpf program from cap_sys_admin to cap_net_admin+cap_bpf, our networking-bpf program failed to start. Because it failed the bpf verifier, and the error log is "R3 pointer comparison prohibited". A simple reproducer as follows, SEC("cls-ingress") int ingress(struct __sk_buff *skb) { struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr); if ((long)(iph + 1) > (long)skb->data_end) return TC_ACT_STOLEN; return TC_ACT_OK; } Per discussion with Yonghong and Alexei [1], comparison of two packet pointers is not a pointer leak. This patch fixes it. Our local kernel is 6.1.y and we expect this fix to be backported to 6.1.y, so stable is CCed. [1]. https://lore.kernel.org/bpf/CAADnVQ+Nmspr7Si+pxWn8zkE7hX-7s93ugwC+94aXSy4uQ9vBg@mail.gmail.com/ | ||||
| CVE-2025-68335 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: comedi: pcl818: fix null-ptr-deref in pcl818_ai_cancel() Syzbot identified an issue [1] in pcl818_ai_cancel(), which stems from the fact that in case of early device detach via pcl818_detach(), subdevice dev->read_subdev may not have initialized its pointer to &struct comedi_async as intended. Thus, any such dereferencing of &s->async->cmd will lead to general protection fault and kernel crash. Mitigate this problem by removing a call to pcl818_ai_cancel() from pcl818_detach() altogether. This way, if the subdevice setups its support for async commands, everything async-related will be handled via subdevice's own ->cancel() function in comedi_device_detach_locked() even before pcl818_detach(). If no support for asynchronous commands is provided, there is no need to cancel anything either. [1] Syzbot crash: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 6050 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:pcl818_ai_cancel+0x69/0x3f0 drivers/comedi/drivers/pcl818.c:762 ... Call Trace: <TASK> pcl818_detach+0x66/0xd0 drivers/comedi/drivers/pcl818.c:1115 comedi_device_detach_locked+0x178/0x750 drivers/comedi/drivers.c:207 do_devconfig_ioctl drivers/comedi/comedi_fops.c:848 [inline] comedi_unlocked_ioctl+0xcde/0x1020 drivers/comedi/comedi_fops.c:2178 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] ... | ||||