Export limit exceeded: 26160 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26253 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26253 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40036 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix possible map leak in fastrpc_put_args copy_to_user() failure would cause an early return without cleaning up the fdlist, which has been updated by the DSP. This could lead to map leak. Fix this by redirecting to a cleanup path on failure, ensuring that all mapped buffers are properly released before returning. | ||||
| CVE-2025-40032 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release The fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can be NULL even after EPF initialization. Then it is prudent to check that they have non-NULL values before releasing the channels. Add the checks in pci_epf_test_clean_dma_chan(). Without the checks, NULL pointer dereferences happen and they can lead to a kernel panic in some cases: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 Call trace: dma_release_channel+0x2c/0x120 (P) pci_epf_test_epc_deinit+0x94/0xc0 [pci_epf_test] pci_epc_deinit_notify+0x74/0xc0 tegra_pcie_ep_pex_rst_irq+0x250/0x5d8 irq_thread_fn+0x34/0xb8 irq_thread+0x18c/0x2e8 kthread+0x14c/0x210 ret_from_fork+0x10/0x20 [mani: trimmed the stack trace] | ||||
| CVE-2025-40062 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs When the initialization of qm->debug.acc_diff_reg fails, the probe process does not exit. However, after qm->debug.qm_diff_regs is freed, it is not set to NULL. This can lead to a double free when the remove process attempts to free it again. Therefore, qm->debug.qm_diff_regs should be set to NULL after it is freed. | ||||
| CVE-2025-40100 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not assert we found block group item when creating free space tree Currently, when building a free space tree at populate_free_space_tree(), if we are not using the block group tree feature, we always expect to find block group items (either extent items or a block group item with key type BTRFS_BLOCK_GROUP_ITEM_KEY) when we search the extent tree with btrfs_search_slot_for_read(), so we assert that we found an item. However this expectation is wrong since we can have a new block group created in the current transaction which is still empty and for which we still have not added the block group's item to the extent tree, in which case we do not have any items in the extent tree associated to the block group. The insertion of a new block group's block group item in the extent tree happens at btrfs_create_pending_block_groups() when it calls the helper insert_block_group_item(). This typically is done when a transaction handle is released, committed or when running delayed refs (either as part of a transaction commit or when serving tickets for space reservation if we are low on free space). So remove the assertion at populate_free_space_tree() even when the block group tree feature is not enabled and update the comment to mention this case. Syzbot reported this with the following stack trace: BTRFS info (device loop3 state M): rebuilding free space tree assertion failed: ret == 0 :: 0, in fs/btrfs/free-space-tree.c:1115 ------------[ cut here ]------------ kernel BUG at fs/btrfs/free-space-tree.c:1115! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 6352 Comm: syz.3.25 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/18/2025 RIP: 0010:populate_free_space_tree+0x700/0x710 fs/btrfs/free-space-tree.c:1115 Code: ff ff e8 d3 (...) RSP: 0018:ffffc9000430f780 EFLAGS: 00010246 RAX: 0000000000000043 RBX: ffff88805b709630 RCX: fea61d0e2e79d000 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffffc9000430f8b0 R08: ffffc9000430f4a7 R09: 1ffff92000861e94 R10: dffffc0000000000 R11: fffff52000861e95 R12: 0000000000000001 R13: 1ffff92000861f00 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007f424d9fe6c0(0000) GS:ffff888125afc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd78ad212c0 CR3: 0000000076d68000 CR4: 00000000003526f0 Call Trace: <TASK> btrfs_rebuild_free_space_tree+0x1ba/0x6d0 fs/btrfs/free-space-tree.c:1364 btrfs_start_pre_rw_mount+0x128f/0x1bf0 fs/btrfs/disk-io.c:3062 btrfs_remount_rw fs/btrfs/super.c:1334 [inline] btrfs_reconfigure+0xaed/0x2160 fs/btrfs/super.c:1559 reconfigure_super+0x227/0x890 fs/super.c:1076 do_remount fs/namespace.c:3279 [inline] path_mount+0xd1a/0xfe0 fs/namespace.c:4027 do_mount fs/namespace.c:4048 [inline] __do_sys_mount fs/namespace.c:4236 [inline] __se_sys_mount+0x313/0x410 fs/namespace.c:4213 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f424e39066a Code: d8 64 89 02 (...) RSP: 002b:00007f424d9fde68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f424d9fdef0 RCX: 00007f424e39066a RDX: 0000200000000180 RSI: 0000200000000380 RDI: 0000000000000000 RBP: 0000200000000180 R08: 00007f424d9fdef0 R09: 0000000000000020 R10: 0000000000000020 R11: 0000000000000246 R12: 0000200000000380 R13: 00007f424d9fdeb0 R14: 0000000000000000 R15: 00002000000002c0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-40101 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix memory leaks when rejecting a non SINGLE data profile without an RST At the end of btrfs_load_block_group_zone_info() the first thing we do is to ensure that if the mapping type is not a SINGLE one and there is no RAID stripe tree, then we return early with an error. Doing that, though, prevents the code from running the last calls from this function which are about freeing memory allocated during its run. Hence, in this case, instead of returning early, we set the ret value and fall through the rest of the cleanup code. | ||||
| CVE-2025-39995 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe The state->timer is a cyclic timer that schedules work_i2c_poll and delayed_work_enable_hotplug, while rearming itself. Using timer_delete() fails to guarantee the timer isn't still running when destroyed, similarly cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has terminated if already executing. During probe failure after timer initialization, these may continue running as orphans and reference the already-freed tc358743_state object through tc358743_irq_poll_timer. The following is the trace captured by KASAN. BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __pfx_sched_balance_find_src_group+0x10/0x10 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? tmigr_update_events+0x280/0x740 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x98/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_node_track_caller_noprof+0x198/0x430 devm_kmalloc+0x7b/0x1e0 tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 141: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 release_nodes+0xa4/0x100 devres_release_group+0x1b2/0x380 i2c_device_probe+0x694/0x880 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __device_attach_driver+0x174/0x220 bus_for_each_drv+0x100/0x190 __device_attach+0x206/0x370 bus_probe_device+0x123/0x170 device_add+0xd25/0x1470 i2c_new_client_device+0x7a0/0xcd0 do_one_initcall+0x89/0x300 do_init_module+0x29d/0x7f0 load_module+0x4f48/0x69e0 init_module_from_file+0xe4/0x150 idempotent_init_module+0x320/0x670 __x64_sys_finit_module+0xbd/0x120 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace timer_delete() with timer_delete_sync() and cancel_delayed_work() with cancel_delayed_work_sync() to ensure proper termination of timer and work items before resource cleanup. This bug was initially identified through static analysis. For reproduction and testing, I created a functional emulation of the tc358743 device via a kernel module and introduced faults through the debugfs interface. | ||||
| CVE-2025-40234 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: alienware-wmi-wmax: Fix NULL pointer dereference in sleep handlers Devices without the AWCC interface don't initialize `awcc`. Add a check before dereferencing it in sleep handlers. | ||||
| CVE-2025-40333 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix infinite loop in __insert_extent_tree() When we get wrong extent info data, and look up extent_node in rb tree, it will cause infinite loop (CONFIG_F2FS_CHECK_FS=n). Avoiding this by return NULL and print some kernel messages in that case. | ||||
| CVE-2025-68354 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: Protect regulator_supply_alias_list with regulator_list_mutex regulator_supply_alias_list was accessed without any locking in regulator_supply_alias(), regulator_register_supply_alias(), and regulator_unregister_supply_alias(). Concurrent registration, unregistration and lookups can race, leading to: 1 use-after-free if an alias entry is removed while being read, 2 duplicate entries when two threads register the same alias, 3 inconsistent alias mappings observed by consumers. Protect all traversals, insertions and deletions on regulator_supply_alias_list with the existing regulator_list_mutex. | ||||
| CVE-2025-68362 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtl818x: rtl8187: Fix potential buffer underflow in rtl8187_rx_cb() The rtl8187_rx_cb() calculates the rx descriptor header address by subtracting its size from the skb tail pointer. However, it does not validate if the received packet (skb->len from urb->actual_length) is large enough to contain this header. If a truncated packet is received, this will lead to a buffer underflow, reading memory before the start of the skb data area, and causing a kernel panic. Add length checks for both rtl8187 and rtl8187b descriptor headers before attempting to access them, dropping the packet cleanly if the check fails. | ||||
| CVE-2025-68373 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: avoid repeated calls to del_gendisk There is a uaf problem which is found by case 23rdev-lifetime: Oops: general protection fault, probably for non-canonical address 0xdead000000000122 RIP: 0010:bdi_unregister+0x4b/0x170 Call Trace: <TASK> __del_gendisk+0x356/0x3e0 mddev_unlock+0x351/0x360 rdev_attr_store+0x217/0x280 kernfs_fop_write_iter+0x14a/0x210 vfs_write+0x29e/0x550 ksys_write+0x74/0xf0 do_syscall_64+0xbb/0x380 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff5250a177e The sequence is: 1. rdev remove path gets reconfig_mutex 2. rdev remove path release reconfig_mutex in mddev_unlock 3. md stop calls do_md_stop and sets MD_DELETED 4. rdev remove path calls del_gendisk because MD_DELETED is set 5. md stop path release reconfig_mutex and calls del_gendisk again So there is a race condition we should resolve. This patch adds a flag MD_DO_DELETE to avoid the race condition. | ||||
| CVE-2025-40321 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000) Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver. Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion(). And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif. [Cc stable] | ||||
| CVE-2025-68297 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix crash in process_v2_sparse_read() for encrypted directories The crash in process_v2_sparse_read() for fscrypt-encrypted directories has been reported. Issue takes place for Ceph msgr2 protocol in secure mode. It can be reproduced by the steps: sudo mount -t ceph :/ /mnt/cephfs/ -o name=admin,fs=cephfs,ms_mode=secure (1) mkdir /mnt/cephfs/fscrypt-test-3 (2) cp area_decrypted.tar /mnt/cephfs/fscrypt-test-3 (3) fscrypt encrypt --source=raw_key --key=./my.key /mnt/cephfs/fscrypt-test-3 (4) fscrypt lock /mnt/cephfs/fscrypt-test-3 (5) fscrypt unlock --key=my.key /mnt/cephfs/fscrypt-test-3 (6) cat /mnt/cephfs/fscrypt-test-3/area_decrypted.tar (7) Issue has been triggered [ 408.072247] ------------[ cut here ]------------ [ 408.072251] WARNING: CPU: 1 PID: 392 at net/ceph/messenger_v2.c:865 ceph_con_v2_try_read+0x4b39/0x72f0 [ 408.072267] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec kvm_intel joydev kvm irqbypass polyval_clmulni ghash_clmulni_intel aesni_intel rapl input_leds psmouse serio_raw i2c_piix4 vga16fb bochs vgastate i2c_smbus floppy mac_hid qemu_fw_cfg pata_acpi sch_fq_codel rbd msr parport_pc ppdev lp parport efi_pstore [ 408.072304] CPU: 1 UID: 0 PID: 392 Comm: kworker/1:3 Not tainted 6.17.0-rc7+ [ 408.072307] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-5.fc42 04/01/2014 [ 408.072310] Workqueue: ceph-msgr ceph_con_workfn [ 408.072314] RIP: 0010:ceph_con_v2_try_read+0x4b39/0x72f0 [ 408.072317] Code: c7 c1 20 f0 d4 ae 50 31 d2 48 c7 c6 60 27 d5 ae 48 c7 c7 f8 8e 6f b0 68 60 38 d5 ae e8 00 47 61 fe 48 83 c4 18 e9 ac fc ff ff <0f> 0b e9 06 fe ff ff 4c 8b 9d 98 fd ff ff 0f 84 64 e7 ff ff 89 85 [ 408.072319] RSP: 0018:ffff88811c3e7a30 EFLAGS: 00010246 [ 408.072322] RAX: ffffed1024874c6f RBX: ffffea00042c2b40 RCX: 0000000000000f38 [ 408.072324] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 408.072325] RBP: ffff88811c3e7ca8 R08: 0000000000000000 R09: 00000000000000c8 [ 408.072326] R10: 00000000000000c8 R11: 0000000000000000 R12: 00000000000000c8 [ 408.072327] R13: dffffc0000000000 R14: ffff8881243a6030 R15: 0000000000003000 [ 408.072329] FS: 0000000000000000(0000) GS:ffff88823eadf000(0000) knlGS:0000000000000000 [ 408.072331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 408.072332] CR2: 000000c0003c6000 CR3: 000000010c106005 CR4: 0000000000772ef0 [ 408.072336] PKRU: 55555554 [ 408.072337] Call Trace: [ 408.072338] <TASK> [ 408.072340] ? sched_clock_noinstr+0x9/0x10 [ 408.072344] ? __pfx_ceph_con_v2_try_read+0x10/0x10 [ 408.072347] ? _raw_spin_unlock+0xe/0x40 [ 408.072349] ? finish_task_switch.isra.0+0x15d/0x830 [ 408.072353] ? __kasan_check_write+0x14/0x30 [ 408.072357] ? mutex_lock+0x84/0xe0 [ 408.072359] ? __pfx_mutex_lock+0x10/0x10 [ 408.072361] ceph_con_workfn+0x27e/0x10e0 [ 408.072364] ? metric_delayed_work+0x311/0x2c50 [ 408.072367] process_one_work+0x611/0xe20 [ 408.072371] ? __kasan_check_write+0x14/0x30 [ 408.072373] worker_thread+0x7e3/0x1580 [ 408.072375] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 408.072378] ? __pfx_worker_thread+0x10/0x10 [ 408.072381] kthread+0x381/0x7a0 [ 408.072383] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 408.072385] ? __pfx_kthread+0x10/0x10 [ 408.072387] ? __kasan_check_write+0x14/0x30 [ 408.072389] ? recalc_sigpending+0x160/0x220 [ 408.072392] ? _raw_spin_unlock_irq+0xe/0x50 [ 408.072394] ? calculate_sigpending+0x78/0xb0 [ 408.072395] ? __pfx_kthread+0x10/0x10 [ 408.072397] ret_from_fork+0x2b6/0x380 [ 408.072400] ? __pfx_kthread+0x10/0x10 [ 408.072402] ret_from_fork_asm+0x1a/0x30 [ 408.072406] </TASK> [ 408.072407] ---[ end trace 0000000000000000 ]--- [ 408.072418] Oops: general protection fault, probably for non-canonical address 0xdffffc00000000 ---truncated--- | ||||
| CVE-2025-40313 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: pretend $Extend records as regular files Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()") requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/ S_IFIFO/S_IFSOCK type, use S_IFREG for $Extend records. | ||||
| CVE-2025-62577 | 5 Fsas Technologies, Linux, Microsoft and 2 more | 5 Eternus Sf, Linux, Windows Server and 2 more | 2026-04-15 | N/A |
| ETERNUS SF provided by Fsas Technologies Inc. contains an incorrect default permissions vulnerability. A low-privileged user with access to the management server may obtain database credentials, potentially allowing execution of OS commands with administrator privileges. | ||||
| CVE-2025-40298 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gve: Implement settime64 with -EOPNOTSUPP ptp_clock_settime() assumes every ptp_clock has implemented settime64(). Stub it with -EOPNOTSUPP to prevent a NULL dereference. | ||||
| CVE-2025-23280 | 2 Linux, Nvidia | 2 Linux, Display Driver | 2026-04-15 | 7 High |
| NVIDIA Display Driver for Linux contains a vulnerability where an attacker could cause a use-after-free. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, and information disclosure. | ||||
| CVE-2025-61667 | 2 Datadoghq, Linux | 2 Agent, Linux | 2026-04-15 | 7.3 High |
| The Datadog Agent collects events and metrics from hosts and sends them to Datadog. A vulnerability within the Datadog Linux Host Agent versions 7.65.0 through 7.70.2 exists due to insufficient permissions being set on the `opt/datadog-agent/python-scripts/__pycache__` directory during installation. Code in this directory is only run by the Agent during Agent install/upgrades. This could allow an attacker with local access to modify files in this directory, which would then subsequently be run when the Agent is upgraded, resulting in local privilege escalation. This issue requires local access to the host and a valid low privilege account to be vulnerable. Note that this vulnerability only impacts the Linux Host Agent. Other variations of the Agent including the container, kubernetes, windows host and other agents are not impacted. Version 7.71.0 contains a patch for the issue. | ||||
| CVE-2025-59692 | 2 Linux, Purevpn | 2 Linux, Purevpn | 2026-04-15 | 3.7 Low |
| PureVPN client applications on Linux through September 2025 mishandle firewalling. They flush the system's existing iptables rules and apply default ACCEPT policies when connecting to a VPN server. This removes firewall rules that may have been configured manually or by other software (e.g., UFW, container engines, or system security policies). Upon VPN disconnect, the original firewall state is not restored. As a result, the system may become unintentionally exposed to network traffic that was previously blocked. This affects CLI 2.0.1 and GUI 2.10.0. | ||||
| CVE-2025-68178 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix possible deadlock while configuring policy Following deadlock can be triggered easily by lockdep: WARNING: possible circular locking dependency detected 6.17.0-rc3-00124-ga12c2658ced0 #1665 Not tainted ------------------------------------------------------ check/1334 is trying to acquire lock: ff1100011d9d0678 (&q->sysfs_lock){+.+.}-{4:4}, at: blk_unregister_queue+0x53/0x180 but task is already holding lock: ff1100011d9d00e0 (&q->q_usage_counter(queue)#3){++++}-{0:0}, at: del_gendisk+0xba/0x110 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&q->q_usage_counter(queue)#3){++++}-{0:0}: blk_queue_enter+0x40b/0x470 blkg_conf_prep+0x7b/0x3c0 tg_set_limit+0x10a/0x3e0 cgroup_file_write+0xc6/0x420 kernfs_fop_write_iter+0x189/0x280 vfs_write+0x256/0x490 ksys_write+0x83/0x190 __x64_sys_write+0x21/0x30 x64_sys_call+0x4608/0x4630 do_syscall_64+0xdb/0x6b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&q->rq_qos_mutex){+.+.}-{4:4}: __mutex_lock+0xd8/0xf50 mutex_lock_nested+0x2b/0x40 wbt_init+0x17e/0x280 wbt_enable_default+0xe9/0x140 blk_register_queue+0x1da/0x2e0 __add_disk+0x38c/0x5d0 add_disk_fwnode+0x89/0x250 device_add_disk+0x18/0x30 virtblk_probe+0x13a3/0x1800 virtio_dev_probe+0x389/0x610 really_probe+0x136/0x620 __driver_probe_device+0xb3/0x230 driver_probe_device+0x2f/0xe0 __driver_attach+0x158/0x250 bus_for_each_dev+0xa9/0x130 driver_attach+0x26/0x40 bus_add_driver+0x178/0x3d0 driver_register+0x7d/0x1c0 __register_virtio_driver+0x2c/0x60 virtio_blk_init+0x6f/0xe0 do_one_initcall+0x94/0x540 kernel_init_freeable+0x56a/0x7b0 kernel_init+0x2b/0x270 ret_from_fork+0x268/0x4c0 ret_from_fork_asm+0x1a/0x30 -> #0 (&q->sysfs_lock){+.+.}-{4:4}: __lock_acquire+0x1835/0x2940 lock_acquire+0xf9/0x450 __mutex_lock+0xd8/0xf50 mutex_lock_nested+0x2b/0x40 blk_unregister_queue+0x53/0x180 __del_gendisk+0x226/0x690 del_gendisk+0xba/0x110 sd_remove+0x49/0xb0 [sd_mod] device_remove+0x87/0xb0 device_release_driver_internal+0x11e/0x230 device_release_driver+0x1a/0x30 bus_remove_device+0x14d/0x220 device_del+0x1e1/0x5a0 __scsi_remove_device+0x1ff/0x2f0 scsi_remove_device+0x37/0x60 sdev_store_delete+0x77/0x100 dev_attr_store+0x1f/0x40 sysfs_kf_write+0x65/0x90 kernfs_fop_write_iter+0x189/0x280 vfs_write+0x256/0x490 ksys_write+0x83/0x190 __x64_sys_write+0x21/0x30 x64_sys_call+0x4608/0x4630 do_syscall_64+0xdb/0x6b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e other info that might help us debug this: Chain exists of: &q->sysfs_lock --> &q->rq_qos_mutex --> &q->q_usage_counter(queue)#3 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&q->q_usage_counter(queue)#3); lock(&q->rq_qos_mutex); lock(&q->q_usage_counter(queue)#3); lock(&q->sysfs_lock); Root cause is that queue_usage_counter is grabbed with rq_qos_mutex held in blkg_conf_prep(), while queue should be freezed before rq_qos_mutex from other context. The blk_queue_enter() from blkg_conf_prep() is used to protect against policy deactivation, which is already protected with blkcg_mutex, hence convert blk_queue_enter() to blkcg_mutex to fix this problem. Meanwhile, consider that blkcg_mutex is held after queue is freezed from policy deactivation, also convert blkg_alloc() to use GFP_NOIO. | ||||