Export limit exceeded: 420535 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 420535 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (420535 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31455 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: stop reclaim before pushing AIL during unmount The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while background reclaim and inodegc are still running. This is broken independently of any use-after-free issues - background reclaim and inodegc should not be running while the AIL is being pushed during unmount, as inodegc can dirty and insert inodes into the AIL during the flush, and background reclaim can race to abort and free dirty inodes. Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background reclaim before pushing the AIL. Stop inodegc before cancelling m_reclaim_work because the inodegc worker can re-queue m_reclaim_work via xfs_inodegc_set_reclaimable. | ||||
| CVE-2026-31452 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations. | ||||
| CVE-2026-31451 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio Replace BUG_ON() with proper error handling when inline data size exceeds PAGE_SIZE. This prevents kernel panic and allows the system to continue running while properly reporting the filesystem corruption. The error is logged via ext4_error_inode(), the buffer head is released to prevent memory leak, and -EFSCORRUPTED is returned to indicate filesystem corruption. | ||||
| CVE-2026-31443 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix crash when the event log is disabled If reporting errors to the event log is not supported by the hardware, and an error that causes Function Level Reset (FLR) is received, the driver will try to restore the event log even if it was not allocated. Also, only try to free the event log if it was properly allocated. | ||||
| CVE-2026-31441 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix memory leak when a wq is reset idxd_wq_disable_cleanup() which is called from the reset path for a workqueue, sets the wq type to NONE, which for other parts of the driver mean that the wq is empty (all its resources were released). Only set the wq type to NONE after its resources are released. | ||||
| CVE-2026-31440 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix leaking event log memory During the device remove process, the device is reset, causing the configuration registers to go back to their default state, which is zero. As the driver is checking if the event log support was enabled before deallocating, it will fail if a reset happened before. Do not check if the support was enabled, the check for 'idxd->evl' being valid (only allocated if the HW capability is available) is enough. | ||||
| CVE-2026-31438 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix kernel BUG in netfs_limit_iter() for ITER_KVEC iterators When a process crashes and the kernel writes a core dump to a 9P filesystem, __kernel_write() creates an ITER_KVEC iterator. This iterator reaches netfs_limit_iter() via netfs_unbuffered_write(), which only handles ITER_FOLIOQ, ITER_BVEC and ITER_XARRAY iterator types, hitting the BUG() for any other type. Fix this by adding netfs_limit_kvec() following the same pattern as netfs_limit_bvec(), since both kvec and bvec are simple segment arrays with pointer and length fields. Dispatch it from netfs_limit_iter() when the iterator type is ITER_KVEC. | ||||
| CVE-2026-31430 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: X.509: Fix out-of-bounds access when parsing extensions Leo reports an out-of-bounds access when parsing a certificate with empty Basic Constraints or Key Usage extension because the first byte of the extension is read before checking its length. Fix it. The bug can be triggered by an unprivileged user by submitting a specially crafted certificate to the kernel through the keyrings(7) API. Leo has demonstrated this with a proof-of-concept program responsibly disclosed off-list. | ||||
| CVE-2026-31428 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD __build_packet_message() manually constructs the NFULA_PAYLOAD netlink attribute using skb_put() and skb_copy_bits(), bypassing the standard nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes are allocated (including NLA alignment padding), only data_len bytes of actual packet data are copied. The trailing nla_padlen(data_len) bytes (1-3 when data_len is not 4-byte aligned) are never initialized, leaking stale heap contents to userspace via the NFLOG netlink socket. Replace the manual attribute construction with nla_reserve(), which handles the tailroom check, header setup, and padding zeroing via __nla_reserve(). The subsequent skb_copy_bits() fills in the payload data on top of the properly initialized attribute. | ||||
| CVE-2026-31427 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp process_sdp() declares union nf_inet_addr rtp_addr on the stack and passes it to the nf_nat_sip sdp_session hook after walking the SDP media descriptions. However rtp_addr is only initialized inside the media loop when a recognized media type with a non-zero port is found. If the SDP body contains no m= lines, only inactive media sections (m=audio 0 ...) or only unrecognized media types, rtp_addr is never assigned. Despite that, the function still calls hooks->sdp_session() with &rtp_addr, causing nf_nat_sdp_session() to format the stale stack value as an IP address and rewrite the SDP session owner and connection lines with it. With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) this results in the session-level o= and c= addresses being rewritten to 0.0.0.0 for inactive SDP sessions. Without stack auto-init the rewritten address is whatever happened to be on the stack. Fix this by pre-initializing rtp_addr from the session-level connection address (caddr) when available, and tracking via a have_rtp_addr flag whether any valid address was established. Skip the sdp_session hook entirely when no valid address exists. | ||||
| CVE-2026-31424 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP Weiming Shi says: xt_match and xt_target structs registered with NFPROTO_UNSPEC can be loaded by any protocol family through nft_compat. When such a match/target sets .hooks to restrict which hooks it may run on, the bitmask uses NF_INET_* constants. This is only correct for families whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge all share the same five hooks (PRE_ROUTING ... POST_ROUTING). ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks validation silently passes for the wrong reasons, allowing matches to run on ARP chains where the hook assumptions (e.g. state->in being set on input hooks) do not hold. This leads to NULL pointer dereferences; xt_devgroup is one concrete example: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227] RIP: 0010:devgroup_mt+0xff/0x350 Call Trace: <TASK> nft_match_eval (net/netfilter/nft_compat.c:407) nft_do_chain (net/netfilter/nf_tables_core.c:285) nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61) nf_hook_slow (net/netfilter/core.c:623) arp_xmit (net/ipv4/arp.c:666) </TASK> Kernel panic - not syncing: Fatal exception in interrupt Fix it by restricting arptables to NFPROTO_ARP extensions only. Note that arptables-legacy only supports: - arpt_CLASSIFY - arpt_mangle - arpt_MARK that provide explicit NFPROTO_ARP match/target declarations. | ||||
| CVE-2026-31423 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_hfsc: fix divide-by-zero in rtsc_min() m2sm() converts a u32 slope to a u64 scaled value. For large inputs (e.g. m1=4000000000), the result can reach 2^32. rtsc_min() stores the difference of two such u64 values in a u32 variable `dsm` and uses it as a divisor. When the difference is exactly 2^32 the truncation yields zero, causing a divide-by-zero oops in the concave-curve intersection path: Oops: divide error: 0000 RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601) Call Trace: init_ed (net/sched/sch_hfsc.c:629) hfsc_enqueue (net/sched/sch_hfsc.c:1569) [...] Widen `dsm` to u64 and replace do_div() with div64_u64() so the full difference is preserved. | ||||
| CVE-2026-31422 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flow: fix NULL pointer dereference on shared blocks flow_change() calls tcf_block_q() and dereferences q->handle to derive a default baseclass. Shared blocks leave block->q NULL, causing a NULL deref when a flow filter without a fully qualified baseclass is created on a shared block. Check tcf_block_shared() before accessing block->q and return -EINVAL for shared blocks. This avoids the null-deref shown below: ======================================================================= KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:flow_change (net/sched/cls_flow.c:508) Call Trace: tc_new_tfilter (net/sched/cls_api.c:2432) rtnetlink_rcv_msg (net/core/rtnetlink.c:6980) [...] ======================================================================= | ||||
| CVE-2026-31421 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL pointer dereference on shared blocks The old-method path in fw_classify() calls tcf_block_q() and dereferences q->handle. Shared blocks leave block->q NULL, causing a NULL deref when an empty cls_fw filter is attached to a shared block and a packet with a nonzero major skb mark is classified. Reject the configuration in fw_change() when the old method (no TCA_OPTIONS) is used on a shared block, since fw_classify()'s old-method path needs block->q which is NULL for shared blocks. The fixed null-ptr-deref calling stack: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] RIP: 0010:fw_classify (net/sched/cls_fw.c:81) Call Trace: tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860) tc_run (net/core/dev.c:4401) __dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790) | ||||
| CVE-2026-31418 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: drop logically empty buckets in mtype_del mtype_del() counts empty slots below n->pos in k, but it only drops the bucket when both n->pos and k are zero. This misses buckets whose live entries have all been removed while n->pos still points past deleted slots. Treat a bucket as empty when all positions below n->pos are unused and release it directly instead of shrinking it further. | ||||
| CVE-2026-31416 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: account for netlink header size This is a followup to an old bug fix: NLMSG_DONE needs to account for the netlink header size, not just the attribute size. This can result in a WARN splat + drop of the netlink message, but other than this there are no ill effects. | ||||
| CVE-2026-31415 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid overflows in ip6_datagram_send_ctl() Yiming Qian reported : <quote> I believe I found a locally triggerable kernel bug in the IPv6 sendmsg ancillary-data path that can panic the kernel via `skb_under_panic()` (local DoS). The core issue is a mismatch between: - a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type `__u16`) and - a pointer to the *last* provided destination-options header (`opt->dst1opt`) when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided. - `include/net/ipv6.h`: - `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible). (lines 291-307, especially 298) - `net/ipv6/datagram.c:ip6_datagram_send_ctl()`: - Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen` without rejecting duplicates. (lines 909-933) - `net/ipv6/ip6_output.c:__ip6_append_data()`: - Uses `opt->opt_flen + opt->opt_nflen` to compute header sizes/headroom decisions. (lines 1448-1466, especially 1463-1465) - `net/ipv6/ip6_output.c:__ip6_make_skb()`: - Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero. (lines 1930-1934) - `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`: - Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the pointed-to header). (lines 1179-1185 and 1206-1211) 1. `opt_flen` is a 16-bit accumulator: - `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`. 2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs and increments `opt_flen` each time: - In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`: - It computes `len = ((hdr->hdrlen + 1) << 3);` - It checks `CAP_NET_RAW` using `ns_capable(net->user_ns, CAP_NET_RAW)`. (line 922) - Then it does: - `opt->opt_flen += len;` (line 927) - `opt->dst1opt = hdr;` (line 928) There is no duplicate rejection here (unlike the legacy `IPV6_2292DSTOPTS` path which rejects duplicates at `net/ipv6/datagram.c:901-904`). If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps while `dst1opt` still points to a large (2048-byte) destination-options header. In the attached PoC (`poc.c`): - 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048` - 1 cmsg with `hdrlen=0` => `len = 8` - Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8` - The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header. 3. The transmit path sizes headers using the wrapped `opt_flen`: - In `net/ipv6/ip6_output.c:1463-1465`: - `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen + opt->opt_nflen : 0) + ...;` With wrapped `opt_flen`, `headersize`/headroom decisions underestimate what will be pushed later. 4. When building the final skb, the actual push length comes from `dst1opt` and is not limited by wrapped `opt_flen`: - In `net/ipv6/ip6_output.c:1930-1934`: - `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);` - In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes `dst1opt` via `ipv6_push_exthdr()`. - In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does: - `skb_push(skb, ipv6_optlen(opt));` - `memcpy(h, opt, ipv6_optlen(opt));` With insufficient headroom, `skb_push()` underflows and triggers `skb_under_panic()` -> `BUG()`: - `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`) - `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`) - The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`). - Root (or any task with `CAP_NET_RAW`) can trigger this without user namespaces. - An unprivileged `uid=1000` user can trigger this if unprivileged user namespaces are enabled and it can create a userns+netns to obtain namespaced `CAP_NET_RAW` (the attached PoC does this). - Local denial of service: kernel BUG/panic (system crash). - ---truncated--- | ||||
| CVE-2026-31411 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: atm: fix crash due to unvalidated vcc pointer in sigd_send() Reproducer available at [1]. The ATM send path (sendmsg -> vcc_sendmsg -> sigd_send) reads the vcc pointer from msg->vcc and uses it directly without any validation. This pointer comes from userspace via sendmsg() and can be arbitrarily forged: int fd = socket(AF_ATMSVC, SOCK_DGRAM, 0); ioctl(fd, ATMSIGD_CTRL); // become ATM signaling daemon struct msghdr msg = { .msg_iov = &iov, ... }; *(unsigned long *)(buf + 4) = 0xdeadbeef; // fake vcc pointer sendmsg(fd, &msg, 0); // kernel dereferences 0xdeadbeef In normal operation, the kernel sends the vcc pointer to the signaling daemon via sigd_enq() when processing operations like connect(), bind(), or listen(). The daemon is expected to return the same pointer when responding. However, a malicious daemon can send arbitrary pointer values. Fix this by introducing find_get_vcc() which validates the pointer by searching through vcc_hash (similar to how sigd_close() iterates over all VCCs), and acquires a reference via sock_hold() if found. Since struct atm_vcc embeds struct sock as its first member, they share the same lifetime. Therefore using sock_hold/sock_put is sufficient to keep the vcc alive while it is being used. Note that there may be a race with sigd_close() which could mark the vcc with various flags (e.g., ATM_VF_RELEASED) after find_get_vcc() returns. However, sock_hold() guarantees the memory remains valid, so this race only affects the logical state, not memory safety. [1]: https://gist.github.com/mrpre/1ba5949c45529c511152e2f4c755b0f3 | ||||
| CVE-2026-31400 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix cache_request leak in cache_release When a reader's file descriptor is closed while in the middle of reading a cache_request (rp->offset != 0), cache_release() decrements the request's readers count but never checks whether it should free the request. In cache_read(), when readers drops to 0 and CACHE_PENDING is clear, the cache_request is removed from the queue and freed along with its buffer and cache_head reference. cache_release() lacks this cleanup. The only other path that frees requests with readers == 0 is cache_dequeue(), but it runs only when CACHE_PENDING transitions from set to clear. If that transition already happened while readers was still non-zero, cache_dequeue() will have skipped the request, and no subsequent call will clean it up. Add the same cleanup logic from cache_read() to cache_release(): after decrementing readers, check if it reached 0 with CACHE_PENDING clear, and if so, dequeue and free the cache_request. | ||||
| CVE-2026-31399 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm/bus: Fix potential use after free in asynchronous initialization Dingisoul with KASAN reports a use after free if device_add() fails in nd_async_device_register(). Commit b6eae0f61db2 ("libnvdimm: Hold reference on parent while scheduling async init") correctly added a reference on the parent device to be held until asynchronous initialization was complete. However, if device_add() results in an allocation failure the ref count of the device drops to 0 prior to the parent pointer being accessed. Thus resulting in use after free. The bug bot AI correctly identified the fix. Save a reference to the parent pointer to be used to drop the parent reference regardless of the outcome of device_add(). | ||||