Export limit exceeded: 18157 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 420280 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 17997 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17997 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98437 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: fix runtime PM reference leaks Use pm_runtime_resume_and_get() in iris_enable_power_domains() to avoid leaking a runtime PM usage count on failure. Also ensure pm_runtime_put_sync() is always called in iris_disable_power_domains(), even when iris_opp_set_rate() fails, so runtime PM references remain balanced. | ||||
| CVE-2026-98860 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: HID: bpf: cast size to ssize_t when checking hid_bpf_hw_request As reported by Sashiko: If a transport driver encounters a hardware error and returns a negative error code such as -EPIPE, ret is implicitly promoted to size_t when compared against size. This causes the negative error code to evaluate as a large positive number, making the (ret > size) condition true. This silently converts the hardware error into a success return value and copies the unmodified buffer back, which could leave BPF programs operating on uninitialized or stale data. Fix this by casting size into ssize_t to return the actual negative error code. | ||||
| CVE-2026-110240 | 2 Duke-git, Lancet Project | 2 Lancet, Lancet | 2026-10-19 | 4.8 Medium |
| Lancet through 2.3.9 contains an SSRF protection bypass vulnerability in netutil.IsInternalIP that misclassifies IPv6 private, link-local, CGNAT and transition addresses as external. Attackers can supply hostnames resolving to these address forms, including NAT64, 6to4 or Teredo embedding internal IPv4, to reach internal services or cloud metadata endpoints. | ||||
| CVE-2026-98843 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: zero gaps in read-gaps folio to avoid writing back stale data netfs_read_gaps() leaves gaps around a streaming write's dirty region unread on the server side, so a short/EOF response there left stale folio content that later got written back. Zero it after the read completes, not before: netfs_wait_for_read() returns rreq->transferred once ret >= 0, so build an iterator over the same bvec array the read used, advance past ret, and zero the rest. The dirty region already maps to sink pages in that array rather than the real folio, so this can't touch it, and only the actual shortfall gets zeroed instead of the whole gap upfront. | ||||
| CVE-2026-98438 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.7 Low |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: options: fix uninit-value in mptcp_write_data_fin When sending a DATA_FIN without data, and because the DATA_FIN occupies 1 octet of the connection-level sequence space [1], it is then required to add a DSS mapping with specific values. If the checksum has been negotiated, it also needs to be computed, and included in the outgoing packet, and thus the initial csum data needs to be reset to 0 as well. This is no longer the case since commit cfcceb7a39fc ("tcp: shrink per-packet memset in __tcp_transmit_skb()"), because the whole ext_copy structure is no longer zeroed by default. This seems to be the only case where use_map is changed and set afterwards, so initialising the csum field only in this case, along with other fields for this specific case. | ||||
| CVE-2026-112140 | 1 Llsourcell | 1 Doctor-dignity | 2026-10-19 | 6.3 Medium |
| A vulnerability was found in llSourcell Doctor-Dignity up to 3f2ffb6c892f13b50a708d05900d3227acb40ded. This impacts the function _get_lib_module of the file python/mlc_chat/chat_module.py. The manipulation of the argument model_lib results in code injection. The attack may be launched remotely. The exploit has been made public and could be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-102552 | 1 Freertos | 1 Freertos-plus-tcp | 2026-10-19 | 5.9 Medium |
| Improper verification of the source of a communication channel in the DNS resolver in Amazon FreeRTOS-Plus-TCP before V4.4.2 might allow remote third-party to insert a chosen address into the device's DNS cache via a forged DNS reply. To remediate this issue, users should upgrade to version V4.4.2 and enable ipconfigDNS_CHECK_REPLY_SOURCE_IP. | ||||
| CVE-2026-102551 | 1 Freertos | 1 Freertos-plus-tcp | 2026-10-19 | 7.7 High |
| Improper verification of the source of a communication channel in the IPv6 Router Advertisement handler in Amazon FreeRTOS-Plus-TCP before V4.4.2 might allow a remote third-party to influence an endpoint's IPv6 default gateway, on-link prefix, and address configuration via a crafted Router Advertisement. To remediate this issue, users should upgrade to version V4.4.2. | ||||
| CVE-2026-110444 | 1 Teamplus Technology | 1 Teamplus Messenger | 2026-10-19 | 8.8 High |
| TeamPlus Messenger developed by Teamplus Technology has a Code Injection vulnerability. Unauthenticated remote attackers can trick users into opening a crafted link to inject and execute arbitrary JavaScript. After the user confirms a Windows security warning, attackers can execute arbitrary code with the privileges of the current user. | ||||
| CVE-2026-110445 | 1 Teamplus Technology | 1 Teamplus Messenger | 2026-10-19 | 8.8 High |
| TeamPlus Messenger developed by Teamplus Technology has a Code Injection vulnerability. Unauthenticated remote attackers can trick users into interacting with crafted content to inject and execute arbitrary JavaScript. After the user confirms a Windows security warning, attackers can execute arbitrary code with the privileges of the current user. | ||||
| CVE-2026-108372 | 1 Huangruiteng | 1 Loopx | 2026-10-19 | N/A |
| Open and provider-neutral, LoopX is a lightweight state kernel and local-first control plane for loop engineering. From version 0.0.1 until 0.4.5, `loopx serve-status` in `loopx/status_server.py` uses `StatusRequestHandler._send_json()` and `do_OPTIONS()` to send `Access-Control-Allow-Origin: *` for unauthenticated responses on predictable loopback ports. A remote attacker can cause an operator who visits attacker-controlled web content to issue cross-origin requests to `GET /status.json`, `GET /review-material?goal_id=...&path=...`, `GET /`, and `POST /control-plane/configure-goal/dry-run`, exposing control-plane state, goal and run information, local absolute paths, private Markdown files below registered goal roots, and dry-run configuration projections. The affected routes do not provide cross-origin writes or arbitrary-file access. This issue is fixed in version 0.4.5. | ||||
| CVE-2026-89071 | 1 Progress | 1 Moveit Transfer | 2026-10-19 | 7.5 High |
| Improper neutralization of special elements used in an LDAP query ('LDAP injection') vulnerability in Progress MOVEit Transfer (LDAP module). This issue affects MOVEit Transfer: before 2025.1.6 and from 2026.0.0 before 2026.0.4. | ||||
| CVE-2026-89075 | 1 Progress | 1 Moveit Transfer | 2026-10-19 | 7.3 High |
| Insecure Storage of Sensitive Information vulnerability in Progress MOVEit Transfer. This issue affects MOVEit Transfer: before 2025.1.6 and from 2026.0.0 before 2026.0.4. | ||||
| CVE-2026-68571 | 2 Apache, Apache Software Foundation | 2 Apache Kylin, Apache Kylin | 2026-10-19 | 8.8 High |
| Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Kylin. Special parameter in JDBC URL can lead to code injection. Impact most to the kylin services that are directly exposed to public network, which is not common. In-house kylin deployments are mostly not impacted. This issue affects Apache Kylin: from 4 through 5.0.4. Users are recommended to upgrade to version 5.0.5, which fixes the issue. | ||||
| CVE-2026-98551 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Fill branch entries with a single assignment perf_clear_branch_entry_bitfields() clears the bitfields of struct perf_branch_entry one by one and leaves from/to alone, since callers overwrite those straight away. The list has to be kept in sync with the struct by hand and has already fallen behind: new_type and priv were added to perf_branch_entry and never added here. Only BRBE writes those two, and neither for every record. brbe_set_perf_entry_type() leaves new_type alone for a branch type it does not recognise, and priv is not set for source-only records. arm_pmuv3.c allocates the per-CPU branch stack with kmalloc(), so such a record reaches userspace with whatever the slot held: uninitialised kmalloc() data on the first pass over the buffer, the previous record's values after that. Nothing under arch/x86/events/ writes either field, so only arm64 is affected. Assign the whole entry at each site instead. Everything not named is then zero, and there is no list to keep in sync. The bitfields add up to exactly 64 bits, so the struct has no padding to leave undefined. perf_clear_branch_entry_bitfields() has no callers left, so remove it. perf_entry_from_brbe_regset() assigns an empty literal instead, since it fills from/to conditionally. PERF_BR_SPEC_NA is 0, so dropping the explicit spec assignment changes nothing. | ||||
| CVE-2026-98516 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix bridge reference leak in nv1a_ram_new() pci_get_domain_bus_and_slot() takes a reference to the PCI device, which is never released once the memory size has been read from its config space. Drop the reference before returning. | ||||
| CVE-2026-98513 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix runtime PM leak in nouveau_connector_detect() If nvif_outp_edid_get() fails, nouveau_connector_detect() returns early without dropping the runtime PM reference taken at the start of the function, keeping the device powered on until the next successful detect. Balance the reference on the error path like the other exit paths do. | ||||
| CVE-2026-98498 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix rev_entry reference leak in mlx5_tc_ct_shared_counter_get() When the reverse entry is found but its counter is already being released, refcount_inc_not_zero() fails and the reference taken by mlx5_tc_ct_entry_get() is never dropped before falling through to create_counter. Drop it so the reverse entry is not kept alive forever by a shared counter lookup that did not use it. | ||||
| CVE-2026-98448 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: xfs: release orphanage dir inode if chown fails LOLLM points out that we leak the igrab'd reference to the orphanage directory inode if chowning it fails. Fix that. | ||||
| CVE-2026-112100 | 1 Deeppavlov | 1 Deeppavlov | 2026-10-19 | 5.5 Medium |
| A vulnerability was determined in DeepPavlov up to 1.7.0. This affects the function MultiTaskPipelinePreprocessor.__init__ of the file deeppavlov/models/preprocessors/multitask_preprocessor.py. This manipulation of the argument preprocessor causes code injection. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet. | ||||