Export limit exceeded: 47523 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (47523 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97481 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250: fix possible ISR soft lockup There are rare cases in which the host gets stuck in the ISR because it is flooded with messages during the startup phase. The reason for the soft lockup in the ISR is the missing FIFO error IRQ (FIFOE) handling. Not handling it and reporting IRQ_HANDLED triggers the IRQ immediately again. Fix this by adding a check for the FIFOE status and clearing the FIFO if no data is ready (DR). This behavior was observed on an AM62L device which uses the OMAP 8250 driver. Fix it for all 8250 drivers, since the OMAP driver's special IRQ setup handling may trigger this behavior more frequently, but it is not ensured that other 8250 drivers aren't affected. | ||||
| CVE-2026-97475 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/tegra/soctherma: Switch to devm cooling device registration Use devm_thermal_of_cooling_device_register() to simplify resource management and avoid manual cleanup in error paths. As a side effect this change has the benefit of solving an existing issue. Before, the function tegra_soctherm_remove() only called debugfs_remove_recursive() and never called thermal_cooling_device_unregister() for any of the cooling devices registered here. After the driver removal, the thermal framework's cdev list would still hold references to thermal_cooling_device objects whose devdata pointer (ts) pointed to memory already freed by the platform device's devm cleanup. With this change, the cooling device is unregistered when the driver is removed, thus fixing the issue above. | ||||
| CVE-2026-97455 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix use-after-free in acpi_ds_terminate_control_method() Fix use-after-free issue in acpi_ds_terminate_control_method() by clearing references to method locals and arguments. | ||||
| CVE-2026-97448 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Add validation for node in acpi_ns_build_normalized_path() Add validation for node in acpi_ns_build_normalized_path() to prevent use-after-free vulnerabilities. | ||||
| CVE-2026-97434 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: fix handling of NAPI on the remove path All the NAPI instances for a DPSW device are attached to the first switch port's net_device but shared by all ports. The NAPI instances get disabled only once the last port goes down. This causes an issue on the .remove() path where each port is unregistered and freed one at a time, causing the NAPI instances to be deleted even though they are not disabled. In order to avoid this, split up the unregister_netdev() calls from the free_netdev() so that we make sure all ports go down before we attempt a deletion of NAPI instances. Also, make the netif_napi_del() explicit as it is on the .probe() path. | ||||
| CVE-2026-97430 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xhci: Prevent queuing new commands if xhci is inaccessible Refuse to queue a new command on the command ring if xHC is marked inaccessible with the HCD_FLAG_HW_ACCESSIBLE. HCD_FLAG_HW_ACCESSIBLE is set and cleared in suspend and resume. Also print a warning if xhci is being suspended with commands still pending on the command ring. | ||||
| CVE-2026-97429 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix UAF race in destroy_queue_cpsch wait_on_destroy_queue() drops locks to wait for queue resume, allowing a concurrent destroy to free the queue. Use is_being_destroyed flag to serialize destruction. | ||||
| CVE-2026-97417 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack: use get_unaligned_be32() in tcp_sack() The timestamp-only fast path dereferences the option stream as *(__be32 *)ptr, which assumes 4-byte alignment that the TCP option stream does not guarantee. Use get_unaligned_be32() instead, which reads the value safely and already returns host byte order, so the htonl() on the comparison constant can be dropped. This matches the existing get_unaligned_be32() use later in the same function. | ||||
| CVE-2026-97411 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ibm: emac: mal: fix potential system hang in mal_remove() napi_disable() is not idempotent and calling it on an already-disabled or unenabled NAPI context will cause the kernel to spin indefinitely waiting for the NAPI_STATE_SCHED bit to clear. In mal_remove(), napi_disable() is called unconditionally. If no MACs were registered, NAPI was never enabled. Also, if they were registered but subsequently unregistered, NAPI was already disabled in mal_unregister_commac(). In either case, calling napi_disable() causes the kernel to hang upon module removal. Fix this by only calling napi_disable() in mal_remove() if the commac list is not empty (which implies NAPI is enabled). | ||||
| CVE-2026-93826 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: hidpp: fix potential UAF in hidpp_connect_event() If input_register_device() fails, we call input_free_device(), but keep stale pointer to the old device in hidpp->input, which could potentially lead to UAF. Fix that by resetting it to NULL before returning from hidpp_connect_event(). | ||||
| CVE-2026-93815 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: au1000: move free_irq out of the close-time spinlocked section au1000_close() calls free_irq() while aup->lock is still held with spin_lock_irqsave(). free_irq() can sleep because it takes the IRQ descriptor request mutex, so it does not belong inside the close-time spinlocked section. This was found by our static analysis tool and then confirmed by manual review of the in-tree au1000_close() .ndo_stop path. The reviewed path keeps aup->lock held across the MAC reset, queue stop and free_irq(dev->irq, dev). A directed runtime validation kept that ndo_stop carrier and the same free_irq(dev->irq, dev) operation under the driver lock. Lockdep reported "BUG: sleeping function called from invalid context" and "Invalid wait context" while free_irq() was taking desc->request_mutex, with au1000_close() and free_irq() on the stack. Drop aup->lock before freeing the IRQ. The protected close-time work still stops the device and queue before IRQ teardown, but the sleepable IRQ core path now runs outside the spinlocked section. | ||||
| CVE-2026-93800 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free on reloc root after error in insert_dirty_subvol() If during relocation we fail in insert_dirty_subvol() because btrfs_update_reloc_root() returned an error, we will leave a root's reloc_root field pointing to a reloc root that was freed instead of NULL, resulting later in a use-after-free, or double free attempt during unmount. The sequence of steps is this: 1) During relocation the call to btrfs_update_reloc_root() in insert_dirty_subvol() fails, so insert_dirty_subvol() returns the error to merge_reloc_root() without adding the root to the list rc->dirty_subvol_roots; 2) Then merge_reloc_root() aborts the current transaction because insert_dirty_subvol() returned an error; 3) Up the call chain, merge_reloc_roots() gets the error, adds the reloc root for root X to the local reloc_roots list and jumps to the 'out' label, where it calls free_reloc_roots() to free all the reloc roots in the local reloc_roots list. This frees the reloc root for root X; 4) We go up the call chain to relocate_block_group() which calls clean_dirty_subvols() to go over dirty roots and set their ->reloc_root field to NULL, but root X is not in the dirty_subvol_roots list, so its ->reloc_root still points to a reloc root; 5) Relocation finishes, with an error and a transaction abort, but the ->reloc_root field for root X still points to the reloc root that was freed in step 3; 6) When unmounting the fs we end up calling: btrfs_free_fs_roots() btrfs_drop_and_free_fs_root() --> calls btrfs_put_root() against root X's ->reloc_root which is not NULL and points to the already freed reloc root in step 4 above Resulting in a use-after-free to a double free attempt. Syzbot reported this with the following dmesg/syslog: [ 106.004389][ T5339] BTRFS error (device loop0 state A): Transaction aborted (error -5) [ 106.014266][ T5339] BTRFS: error (device loop0 state A) in merge_reloc_root:1655: errno=-5 IO failure [ 106.021891][ T1061] BTRFS error (device loop0 state A): error while writing out transaction: -5 [ 106.026964][ T1061] BTRFS warning (device loop0 state A): Skipping commit of aborted transaction. [ 106.033807][ T5340] BTRFS error (device loop0 state A): bdev /dev/loop0 errs: wr 3, rd 0, flush 0, corrupt 0, gen 0 [ 106.039265][ T1061] BTRFS: error (device loop0 state A) in cleanup_transaction:2067: errno=-5 IO failure [ 106.044382][ T5339] BTRFS info (device loop0 state EA): forced readonly [ 106.074329][ T5339] BTRFS: error (device loop0 state EA) in merge_reloc_roots:1887: errno=-5 IO failure [ 106.081004][ T5356] BTRFS info (device loop0 state EA): scrub: started on devid 1 [ 106.085611][ T5339] BTRFS info (device loop0 state EA): balance: ended with status: -30 [ 106.089517][ T5356] BTRFS info (device loop0 state EA): scrub: not finished on devid 1 with status: -30 [ 106.662365][ T5338] BTRFS info (device loop0 state EA): last unmount of filesystem 3a375e4e-b156-4d76-a2ad-16e198ce1409 [ 106.682946][ T5338] ================================================================== [ 106.686574][ T5338] BUG: KASAN: slab-use-after-free in btrfs_put_root+0x2f/0x250 [ 106.690090][ T5338] Write of size 4 at addr ffff88803f978630 by task syz.0.0/5338 [ 106.693173][ T5338] [ 106.694279][ T5338] CPU: 0 UID: 0 PID: 5338 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) [ 106.694293][ T5338] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 106.694300][ T5338] Call Trace: [ 106.694308][ T5338] <TASK> [ 106.694314][ T5338] dump_stack_lvl+0xe8/0x150 [ 106.694331][ T5338] print_address_description+0x55/0x1e0 [ 106.694343][ T5338] ? btrfs_put_root+0x2f/0x250 [ 106.694358][ T5338] print_report+0x58/0x70 [ 106. ---truncated--- | ||||
| CVE-2026-93782 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: flush backend after device ioctls vhost-scsi translates guest response descriptors into userspace iovecs when commands are submitted. Target-core completes those commands asynchronously, so VHOST_SET_MEM_TABLE can replace the memory table while an in-flight command still retains response iovecs translated through the old table. If the old mapping is reused after VHOST_SET_MEM_TABLE returns, command completion can write the response to an unrelated userspace object. Flush the vhost-scsi backend after vhost_dev_ioctl() handles a device ioctl. This waits for in-flight commands that can still use the old response iovecs before the ioctl returns. | ||||
| CVE-2026-93287 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: i2c: smbus: reject oversized block transfers in the common path The SMBus block transfer length data->block[0] is validated in i2c_smbus_xfer_emulated() but that check runs too late for tracepoints and is skipped entirely when the adapter provides a native smbus_xfer implementation. This allows user-controlled oversized block lengths to reach tracepoint memcpy calls and driver callbacks unchecked. Add an early validation in __i2c_smbus_xfer() that rejects block transfers whose caller-supplied length is zero or exceeds I2C_SMBUS_BLOCK_MAX before any tracepoint fires or driver callback runs. data->block[0] is filled in by the device on SMBus block reads, so the check is scoped to operations where the length is actually supplied by the caller. This is consistent with the existing -EINVAL convention in the emulated path and protects all downstream consumers at once: the smbus_write tracepoint, all native smbus_xfer driver implementations, and the emulated path. Two distinct bugs are fixed by this change: Bug 1: smbus_write tracepoint OOB (include/trace/events/smbus.h) trace_smbus_write() fires before any validation and copies data->block[0]+1 bytes into a 34-byte event buffer. With block[0]=0xfe the tracepoint copies 255 bytes, overflowing by 221. BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_smbus_write+0x27c/0x530 Read of size 255 at addr ffff88800d98fcf8 by task poc_smbus/91 Call Trace: <TASK> __asan_memcpy+0x23/0x80 trace_event_raw_event_smbus_write+0x27c/0x530 __i2c_smbus_xfer+0x43a/0xa40 i2c_smbus_xfer+0x19e/0x340 i2cdev_ioctl_smbus+0x38f/0x7f0 i2cdev_ioctl+0x35e/0x680 __x64_sys_ioctl+0x147/0x1e0 do_syscall_64+0xcf/0x15a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Bug 2: i2c-stub I2C_SMBUS_I2C_BLOCK_DATA OOB (drivers/i2c/i2c-stub.c) stub_xfer() implements .smbus_xfer directly and only clamps block[0] against 256-command, not I2C_SMBUS_BLOCK_MAX. With block[0]=0xff and command=0 the loop accesses block[1+i] for i up to 254, far past the 34-byte union. UBSAN: array-index-out-of-bounds in drivers/i2c/i2c-stub.c:223:44 index 34 is out of range for type '__u8 [34]' Call Trace: <TASK> __ubsan_handle_out_of_bounds+0xd7/0x120 stub_xfer+0x1971/0x198f [i2c_stub] __i2c_smbus_xfer+0x306/0xa40 i2c_smbus_xfer+0x19e/0x340 i2cdev_ioctl_smbus+0x38f/0x7f0 i2cdev_ioctl+0x35e/0x680 __x64_sys_ioctl+0x147/0x1e0 do_syscall_64+0xcf/0x15a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Both traces reproduced on v7.0-rc6+i2c/for-current with KASAN+UBSAN. | ||||
| CVE-2026-89739 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM event is received. If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and the memory allocated for dep with kzalloc() is released by kfree(dep), while the delayed work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | dwc3_thread_interrupt | dwc3_endpoint_interrupt | dwc3_gadget_endpoint_stream_event | queue_delayed_work(system_percpu_wq, | &dep->nostream_work) dwc3_gadget_free_endpoints | dwc3_free_trb_pool(dep) | list_del(&dep->endpoint.ep_list) | dwc3_debugfs_remove_endpoint_dir(dep) | kfree(dep) | // dep is freed | | dwc3_nostream_work | // use dep (use-after-free) Fix it by canceling the delayed work before kfree(dep) in dwc3_gadget_free_endpoints. | ||||
| CVE-2026-89445 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix UAF in selftest IOPF reporting IOMMUFD selftest TRIGGER_IOPF borrows an attach handle from group->pasid_array without synchronizing against PASID detach, then a concurrent iommu_report_device_fault() can dereference that borrowed handle's domain pointer after the detach erases the handle and frees the backing struct iommufd_attach_handle. TRIGGER_IOPF then dereferences the freed handle, causing a UAF. Fix by adding a iopf_rwsem in mock_dev to follow the expected design of a real driver. Hold its read side across the whole iommu_report_device_fault() call, and its write side around every path that attaches, detaches, or replaces a device domain. This can block new reports and drains in-flight reports before an old attach handle or the IOPF fault parameter can be removed. Also take the write side while registering a mock device, since it can invoke the mock driver's default-domain attach callback. | ||||
| CVE-2026-72463 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix dev use-after-free in xfrm async resumption xfrm async resumption hold skb->dev refcnt until after transport_finish. However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking device reference, such as vti_rcv_cb. The subsequent async resumption will decrement the tunnel device's reference count, which lead to uaf of tunnel dev and refcnt leak of orig dev as below: unregister_netdevice: waiting for vti1 to become free. Usage count = -2 Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set by xfrm_rcv_cb can race with device teardown. Extend rcu protection over xfrm_rcv_cb and transport_finish to prevent races. | ||||
| CVE-2026-53359 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Fix shadow paging use-after-free due to unexpected role Commit 0cb2af2ea66ad ("KVM: x86: Fix shadow paging use-after-free due to unexpected GFN") fixed a shadow paging mismatch between stored and computed GFNs; the bug could be triggered by changing a PDE mapping from outside the guest, and then deleting a memslot. The rmap_remove() call would miss entries created after the PDE change because the GFN of the leaf SPTE does not match the GFN of the struct kvm_mmu_page. A similar hole however remains if the modified PDE points to a non-leaf page. In this case the gfn can be made to match, but the role does not match: the original large 2MB page creates a kvm_mmu_page with direct=1, while the new 4KB needs a kvm_mmu_page with direct=0. However, kvm_mmu_get_child_sp() does not compare the role, and therefore reuses the page. The next step is installing a leaf (4KB) SPTE on the new path which records an rmap entry under the gfn resolved by the walk. But when that child is zapped its parent kvm_mmu_page has direct=1 and kvm_mmu_page_get_gfn() computes the gfn for the 4KB page as sp->gfn + index instead of using sp->shadowed_translation[] (or sp->gfns[] in older kernels). It therefore fails to remove the recorded entry. When the memslot is dropped the shadow page is freed but the rmap entry survives, as in the scenario that was already fixed. Code that later walks that gfn (dirty logging, MMU notifier invalidation, and so on) dereferences an sptep that lies in the freed page, causing the use-after-free. | ||||
| CVE-2026-90448 | 1 Cisagov | 1 Malcolm | 2026-10-02 | 6.5 Medium |
| A deployment mode intended to expose only read access to stored data proxies a set of application programming interface routes without restricting which request methods are allowed. One such route accepts a request that creates or overwrites a stored record, including an attacker-chosen identifier, using the application's own elevated backend credentials. This allows an authenticated user on a deployment intended to be read-only to forge or overwrite stored records that should not be modifiable in that deployment mode. | ||||
| CVE-2026-90450 | 1 Cisagov | 1 Malcolm | 2026-10-02 | 4.3 Medium |
| The application's role-authorization lookup defaults to granting access when a request handler's name is not present in its table of role requirements, rather than defaulting to deny. Any request handler that is not explicitly registered in this table is reachable by any authenticated user regardless of their assigned role, and any newly added handler is fail-open by default until explicitly added to the table. | ||||