Export limit exceeded: 30148 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 55241 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (55241 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98392 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix tx_handle bounds off-by-one Valid indices into txq->urbd0s/tfds/bufs are 0..txq->count-1, so tfd_index == txq->count is already out of range. Change the guard in btintel_pcie_msix_tx_handle() from '> txq->count' to '>= txq->count'. This issue was reported by Claude Mythos. | ||||
| CVE-2026-98393 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv4: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP_MAX_MTU to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IP_MTU_DISCOVER is set to IP_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce: 1. Set device MTU bigger than IP_MAX_MTU + 20. cork->base.fragsize will be set to that MTU in ip_setup_cork. 2. Set IP_MTU_DISCOVER to IP_PMTUDISC_PROBE. It lets maxnonfragsize be set to device MTU (cork->fragsize) in __ip_append_data, rather than to IP_MAX_MTU. 3. Send 65528 bytes of payload (+8 bytes of UDP header, +20 bytes of IPv4 header). Device MTU allows it (it's only one byte bigger than IP_MAX_MTU + IPv4 header, and the device MTU is bigger than that). 4. The UDP length in the built packet is 65536, which overflows the 16-bit length field and triggers the WARN in udp_set_len_short. Note: IP_PMTUDISC_DO with IPv4 is safe, because ip_dst_mtu_maybe_forward always clamps at IP_MAX_MTU, unlike ip6_dst_mtu_maybe_forward. The Fixes tag points at the first commit where I could reproduce the overflow with IPv4 and IP_PMTUDISC_PROBE. | ||||
| CVE-2026-97801 | 1 Microsoft | 2 .net, .net Framework | 2026-10-15 | 7.5 High |
| Improper validation of specified type of input in .NET Framework allows an unauthorized attacker to perform tampering over a network. | ||||
| CVE-2026-88175 | 1 Microsoft | 10 365, 365 Apps, Microsoft 365 and 7 more | 2026-10-15 | 6.5 Medium |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2025-40082 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc() BUG: KASAN: slab-out-of-bounds in hfsplus_uni2asc+0xa71/0xb90 fs/hfsplus/unicode.c:186 Read of size 2 at addr ffff8880289ef218 by task syz.6.248/14290 CPU: 0 UID: 0 PID: 14290 Comm: syz.6.248 Not tainted 6.16.4 #1 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x5f0 mm/kasan/report.c:482 kasan_report+0xca/0x100 mm/kasan/report.c:595 hfsplus_uni2asc+0xa71/0xb90 fs/hfsplus/unicode.c:186 hfsplus_listxattr+0x5b6/0xbd0 fs/hfsplus/xattr.c:738 vfs_listxattr+0xbe/0x140 fs/xattr.c:493 listxattr+0xee/0x190 fs/xattr.c:924 filename_listxattr fs/xattr.c:958 [inline] path_listxattrat+0x143/0x360 fs/xattr.c:988 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcb/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe0e9fae16d Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe0eae67f98 EFLAGS: 00000246 ORIG_RAX: 00000000000000c3 RAX: ffffffffffffffda RBX: 00007fe0ea205fa0 RCX: 00007fe0e9fae16d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000200000000000 RBP: 00007fe0ea0480f0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fe0ea206038 R14: 00007fe0ea205fa0 R15: 00007fe0eae48000 </TASK> Allocated by task 14290: kasan_save_stack+0x24/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4333 [inline] __kmalloc_noprof+0x219/0x540 mm/slub.c:4345 kmalloc_noprof include/linux/slab.h:909 [inline] hfsplus_find_init+0x95/0x1f0 fs/hfsplus/bfind.c:21 hfsplus_listxattr+0x331/0xbd0 fs/hfsplus/xattr.c:697 vfs_listxattr+0xbe/0x140 fs/xattr.c:493 listxattr+0xee/0x190 fs/xattr.c:924 filename_listxattr fs/xattr.c:958 [inline] path_listxattrat+0x143/0x360 fs/xattr.c:988 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcb/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f When hfsplus_uni2asc is called from hfsplus_listxattr, it actually passes in a struct hfsplus_attr_unistr*. The size of the corresponding structure is different from that of hfsplus_unistr, so the previous fix (94458781aee6) is insufficient. The pointer on the unicode buffer is still going beyond the allocated memory. This patch introduces two warpper functions hfsplus_uni2asc_xattr_str and hfsplus_uni2asc_str to process two unicode buffers, struct hfsplus_attr_unistr* and struct hfsplus_unistr* respectively. When ustrlen value is bigger than the allocated memory size, the ustrlen value is limited to an safe size. | ||||
| CVE-2025-38502 | 3 Debian, Linux, Siemens | 4 Debian Linux, Linux Kernel, Simatic Cn 4100 and 1 more | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix oob access in cgroup local storage Lonial reported that an out-of-bounds access in cgroup local storage can be crafted via tail calls. Given two programs each utilizing a cgroup local storage with a different value size, and one program doing a tail call into the other. The verifier will validate each of the indivial programs just fine. However, in the runtime context the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the BPF program as well as any cgroup local storage flavor the program uses. Helpers such as bpf_get_local_storage() pick this up from the runtime context: ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx); storage = ctx->prog_item->cgroup_storage[stype]; if (stype == BPF_CGROUP_STORAGE_SHARED) ptr = &READ_ONCE(storage->buf)->data[0]; else ptr = this_cpu_ptr(storage->percpu_buf); For the second program which was called from the originally attached one, this means bpf_get_local_storage() will pick up the former program's map, not its own. With mismatching sizes, this can result in an unintended out-of-bounds access. To fix this issue, we need to extend bpf_map_owner with an array of storage_cookie[] to match on i) the exact maps from the original program if the second program was using bpf_get_local_storage(), or ii) allow the tail call combination if the second program was not using any of the cgroup local storage maps. | ||||
| CVE-2025-38439 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Set DMA unmap len correctly for XDP_REDIRECT When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set() with the proper length instead of 0. This bug triggers this warning on a system with IOMMU enabled: WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170 RIP: 0010:__iommu_dma_unmap+0x159/0x170 Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45 b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00 RSP: 0018:ff22d31181150c88 EFLAGS: 00010206 RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000 R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000 R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00 FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0 PKRU: 55555554 Call Trace: <IRQ> ? show_regs+0x6d/0x80 ? __warn+0x89/0x160 ? __iommu_dma_unmap+0x159/0x170 ? report_bug+0x17e/0x1b0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x18/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? __iommu_dma_unmap+0x159/0x170 ? __iommu_dma_unmap+0xb3/0x170 iommu_dma_unmap_page+0x4f/0x100 dma_unmap_page_attrs+0x52/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? xdp_return_frame+0x2e/0xd0 bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en] __bnxt_poll_work_done+0x81/0x1e0 [bnxt_en] bnxt_poll+0xd3/0x1e0 [bnxt_en] | ||||
| CVE-2025-38375 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: virtio-net: ensure the received length does not exceed allocated size In xdp_linearize_page, when reading the following buffers from the ring, we forget to check the received length with the true allocate size. This can lead to an out-of-bound read. This commit adds that missing check. | ||||
| CVE-2025-38342 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: software node: Correct a OOB check in software_node_get_reference_args() software_node_get_reference_args() wants to get @index-th element, so the property value requires at least '(index + 1) * sizeof(*ref)' bytes but that can not be guaranteed by current OOB check, and may cause OOB for malformed property. Fix by using as OOB check '((index + 1) * sizeof(*ref) > prop->length)'. | ||||
| CVE-2025-38239 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix invalid node index On a system with DRAM interleave enabled, out-of-bound access is detected: megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x46/0x4b megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas] megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas] local_pci_probe+0x42/0x90 pci_device_probe+0xdc/0x290 really_probe+0xdb/0x340 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8b/0xe0 bus_add_driver+0x142/0x220 driver_register+0x72/0xd0 megasas_init+0xdf/0xff0 [megaraid_sas] do_one_initcall+0x57/0x310 do_init_module+0x90/0x250 init_module_from_file+0x85/0xc0 idempotent_init_module+0x114/0x310 __x64_sys_finit_module+0x65/0xc0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it accordingly. | ||||
| CVE-2025-38193 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: reject invalid perturb period Gerrard Tai reported that SFQ perturb_period has no range check yet, and this can be used to trigger a race condition fixed in a separate patch. We want to make sure ctl->perturb_period * HZ will not overflow and is positive. tc qd add dev lo root sfq perturb -10 # negative value : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 1000000000 # too big : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 2000000 # acceptable value tc -s -d qd sh dev lo qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 | ||||
| CVE-2025-38161 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix error flow upon firmware failure for RQ destruction Upon RQ destruction if the firmware command fails which is the last resource to be destroyed some SW resources were already cleaned regardless of the failure. Now properly rollback the object to its original state upon such failure. In order to avoid a use-after free in case someone tries to destroy the object again, which results in the following kernel trace: refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 37589 at lib/refcount.c:28 refcount_warn_saturate+0xf4/0x148 Modules linked in: rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) rfkill mlx5_core(OE) mlxdevm(OE) ib_uverbs(OE) ib_core(OE) psample mlxfw(OE) mlx_compat(OE) macsec tls pci_hyperv_intf sunrpc vfat fat virtio_net net_failover failover fuse loop nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_console virtio_gpu virtio_blk virtio_dma_buf virtio_mmio dm_mirror dm_region_hash dm_log dm_mod xpmem(OE) CPU: 0 UID: 0 PID: 37589 Comm: python3 Kdump: loaded Tainted: G OE ------- --- 6.12.0-54.el10.aarch64 #1 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : refcount_warn_saturate+0xf4/0x148 lr : refcount_warn_saturate+0xf4/0x148 sp : ffff80008b81b7e0 x29: ffff80008b81b7e0 x28: ffff000133d51600 x27: 0000000000000001 x26: 0000000000000000 x25: 00000000ffffffea x24: ffff00010ae80f00 x23: ffff00010ae80f80 x22: ffff0000c66e5d08 x21: 0000000000000000 x20: ffff0000c66e0000 x19: ffff00010ae80340 x18: 0000000000000006 x17: 0000000000000000 x16: 0000000000000020 x15: ffff80008b81b37f x14: 0000000000000000 x13: 2e656572662d7265 x12: ffff80008283ef78 x11: ffff80008257efd0 x10: ffff80008283efd0 x9 : ffff80008021ed90 x8 : 0000000000000001 x7 : 00000000000bffe8 x6 : c0000000ffff7fff x5 : ffff0001fb8e3408 x4 : 0000000000000000 x3 : ffff800179993000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000133d51600 Call trace: refcount_warn_saturate+0xf4/0x148 mlx5_core_put_rsc+0x88/0xa0 [mlx5_ib] mlx5_core_destroy_rq_tracked+0x64/0x98 [mlx5_ib] mlx5_ib_destroy_wq+0x34/0x80 [mlx5_ib] ib_destroy_wq_user+0x30/0xc0 [ib_core] uverbs_free_wq+0x28/0x58 [ib_uverbs] destroy_hw_idr_uobject+0x34/0x78 [ib_uverbs] uverbs_destroy_uobject+0x48/0x240 [ib_uverbs] __uverbs_cleanup_ufile+0xd4/0x1a8 [ib_uverbs] uverbs_destroy_ufile_hw+0x48/0x120 [ib_uverbs] ib_uverbs_close+0x2c/0x100 [ib_uverbs] __fput+0xd8/0x2f0 __fput_sync+0x50/0x70 __arm64_sys_close+0x40/0x90 invoke_syscall.constprop.0+0x74/0xd0 do_el0_svc+0x48/0xe8 el0_svc+0x44/0x1d0 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x1a4/0x1a8 | ||||
| CVE-2025-38146 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Fix the dead loop of MPLS parse The unexpected MPLS packet may not end with the bottom label stack. When there are many stacks, The label count value has wrapped around. A dead loop occurs, soft lockup/CPU stuck finally. stack backtrace: UBSAN: array-index-out-of-bounds in /build/linux-0Pa0xK/linux-5.15.0/net/openvswitch/flow.c:662:26 index -1 is out of range for type '__be32 [3]' CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Tainted: G OE 5.15.0-121-generic #131-Ubuntu Hardware name: Dell Inc. PowerEdge C6420/0JP9TF, BIOS 2.12.2 07/14/2021 Call Trace: <IRQ> show_stack+0x52/0x5c dump_stack_lvl+0x4a/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x36 __ubsan_handle_out_of_bounds.cold+0x44/0x49 key_extract_l3l4+0x82a/0x840 [openvswitch] ? kfree_skbmem+0x52/0xa0 key_extract+0x9c/0x2b0 [openvswitch] ovs_flow_key_extract+0x124/0x350 [openvswitch] ovs_vport_receive+0x61/0xd0 [openvswitch] ? kernel_init_free_pages.part.0+0x4a/0x70 ? get_page_from_freelist+0x353/0x540 netdev_port_receive+0xc4/0x180 [openvswitch] ? netdev_port_receive+0x180/0x180 [openvswitch] netdev_frame_hook+0x1f/0x40 [openvswitch] __netif_receive_skb_core.constprop.0+0x23a/0xf00 __netif_receive_skb_list_core+0xfa/0x240 netif_receive_skb_list_internal+0x18e/0x2a0 napi_complete_done+0x7a/0x1c0 bnxt_poll+0x155/0x1c0 [bnxt_en] __napi_poll+0x30/0x180 net_rx_action+0x126/0x280 ? bnxt_msix+0x67/0x80 [bnxt_en] handle_softirqs+0xda/0x2d0 irq_exit_rcu+0x96/0xc0 common_interrupt+0x8e/0xa0 </IRQ> | ||||
| CVE-2025-38111 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mdiobus: Fix potential out-of-bounds read/write access When using publicly available tools like 'mdio-tools' to read/write data from/to network interface and its PHY via mdiobus, there is no verification of parameters passed to the ioctl and it accepts any mdio address. Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define, but it is possible to pass higher value than that via ioctl. While read/write operation should generally fail in this case, mdiobus provides stats array, where wrong address may allow out-of-bounds read/write. Fix that by adding address verification before read/write operation. While this excludes this access from any statistics, it improves security of read/write operation. | ||||
| CVE-2025-38110 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mdiobus: Fix potential out-of-bounds clause 45 read/write access When using publicly available tools like 'mdio-tools' to read/write data from/to network interface and its PHY via C45 (clause 45) mdiobus, there is no verification of parameters passed to the ioctl and it accepts any mdio address. Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define, but it is possible to pass higher value than that via ioctl. While read/write operation should generally fail in this case, mdiobus provides stats array, where wrong address may allow out-of-bounds read/write. Fix that by adding address verification before C45 read/write operation. While this excludes this access from any statistics, it improves security of read/write operation. | ||||
| CVE-2025-38004 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking for bcm_op runtime updates The CAN broadcast manager (CAN BCM) can send a sequence of CAN frames via hrtimer. The content and also the length of the sequence can be changed resp reduced at runtime where the 'currframe' counter is then set to zero. Although this appeared to be a safe operation the updates of 'currframe' can be triggered from user space and hrtimer context in bcm_can_tx(). Anderson Nascimento created a proof of concept that triggered a KASAN slab-out-of-bounds read access which can be prevented with a spin_lock_bh. At the rework of bcm_can_tx() the 'count' variable has been moved into the protected section as this variable can be modified from both contexts too. | ||||
| CVE-2025-37984 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ecdsa - Harden against integer overflows in DIV_ROUND_UP() Herbert notes that DIV_ROUND_UP() may overflow unnecessarily if an ecdsa implementation's ->key_size() callback returns an unusually large value. Herbert instead suggests (for a division by 8): X / 8 + !!(X & 7) Based on this formula, introduce a generic DIV_ROUND_UP_POW2() macro and use it in lieu of DIV_ROUND_UP() for ->key_size() return values. Additionally, use the macro in ecc_digits_from_bytes(), whose "nbytes" parameter is a ->key_size() return value in some instances, or a user-specified ASN.1 length in the case of ecdsa_get_signature_rs(). | ||||
| CVE-2025-37973 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: fix out-of-bounds access during multi-link element defragmentation Currently during the multi-link element defragmentation process, the multi-link element length added to the total IEs length when calculating the length of remaining IEs after the multi-link element in cfg80211_defrag_mle(). This could lead to out-of-bounds access if the multi-link element or its corresponding fragment elements are the last elements in the IEs buffer. To address this issue, correctly calculate the remaining IEs length by deducting the multi-link element end offset from total IEs end offset. | ||||
| CVE-2025-37911 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix out-of-bound memcpy() during ethtool -w When retrieving the FW coredump using ethtool, it can sometimes cause memory corruption: BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45): __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] ethtool_get_dump_data+0xdc/0x1a0 __dev_ethtool+0xa1e/0x1af0 dev_ethtool+0xa8/0x170 dev_ioctl+0x1b5/0x580 sock_do_ioctl+0xab/0xf0 sock_ioctl+0x1ce/0x2e0 __x64_sys_ioctl+0x87/0xc0 do_syscall_64+0x5c/0xf0 entry_SYSCALL_64_after_hwframe+0x78/0x80 ... This happens when copying the coredump segment list in bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command. The info->dest_buf buffer is allocated based on the number of coredump segments returned by the FW. The segment list is then DMA'ed by the FW and the length of the DMA is returned by FW. The driver then copies this DMA'ed segment list to info->dest_buf. In some cases, this DMA length may exceed the info->dest_buf length and cause the above BUG condition. Fix it by capping the copy length to not exceed the length of info->dest_buf. The extra DMA data contains no useful information. This code path is shared for the HWRM_DBG_COREDUMP_LIST and the HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different for these 2 FW commands. To simplify the logic, we need to move the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE up, so that the new check to cap the copy length will work for both commands. | ||||
| CVE-2025-37891 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: Fix buffer overflow at UMP SysEx message conversion The conversion function from MIDI 1.0 to UMP packet contains an internal buffer to keep the incoming MIDI bytes, and its size is 4, as it was supposed to be the max size for a MIDI1 UMP packet data. However, the implementation overlooked that SysEx is handled in a different format, and it can be up to 6 bytes, as found in do_convert_to_ump(). It leads eventually to a buffer overflow, and may corrupt the memory when a longer SysEx message is received. The fix is simply to extend the buffer size to 6 to fit with the SysEx UMP message. | ||||