Export limit exceeded: 17980 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17980 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89680 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfsd_file leak on inter-server COPY setup failure When nfsd4_setup_inter_ssc() fails, nfsd4_copy() returns nfserr_offload_denied directly, bypassing the out: label where release_copy_files() would drop the nf_dst reference taken by nfs4_preprocess_stateid_op(). Each failed inter-server COPY leaks one nfsd_file, pinning file/inode/dentry/vfsmount. Fix by setting status and jumping to out: instead of returning directly. | ||||
| CVE-2026-89645 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: drop recovered reloc root refs on recovery failure During relocation recovery, each fs root gets a reference to its relocation root. If loading or adding a later root fails, or if the first transaction commit fails, btrfs_recover_relocation() jumps to out_unset before merge_reloc_roots() and clean_dirty_subvols(). put_reloc_control() drops the list-owned relocation root references, but it does not clear fs_root->reloc_root or drop the references owned by those pointers. Mount cleanup only drops them when BTRFS_FS_ERROR is set, so an error such as -ENOMEM while processing a later root can leave references behind. Keep temporary references to the fs roots associated during recovery. On failure, clear their reloc_root pointers and drop the corresponding references. Once the first transaction commit succeeds, drop only the temporary fs root references and let the normal merge and cleanup paths handle the relocation roots. Fault injection on a pending-relocation image confirmed the cleanup gap. With an injected first-commit failure, 25 fs roots had reloc_root set with fs_error=0. With this fix, the same failure path drops that count to 0 before mount fails. | ||||
| CVE-2026-89462 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: propagate register read errors max17040_get_vcell() and max17040_get_soc() ignore errors returned by regmap_read(). When an I2C transfer fails, the uninitialized register value is converted and reported to userspace as a valid voltage or state of charge. The polling worker can also replace the cached state of charge with the bogus value and emit a spurious change event. Propagate read errors through the power supply get_property callback and keep the last valid cached state of charge when polling fails. | ||||
| CVE-2026-81016 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Propagate SMU errors and validate S2D address amd_stb_s2d_init() discards the return value of several S2D SMU commands. When the SMU refuses a command (e.g. "SMU cmd failed. err: 0xff") the failure is only noticed indirectly - if at all - and reported as -EIO, masking the real error. More seriously, the S2D_PHYS_ADDR_LOW/HIGH return values are ignored, so on failure phys_addr_low/hi are left uninitialised and the assembled address is passed straight to devm_ioremap(). When the SMU leaves them at zero this maps physical address 0 and trips the ioremap-on-RAM warning: amd_pmc AMDI000B:00: SMU cmd failed. err: 0xff ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff WARNING: CPU: 13 PID: 4592 at arch/x86/mm/ioremap.c:... Check the return value of each SMU command and propagate it, and reject a zero physical address before calling devm_ioremap(). | ||||
| CVE-2026-80983 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix socket refcount leak in smc_switch_conns() smc_switch_conns() takes a reference on the SMC socket before dropping lgr->conns_lock, so the connection stays alive while the CDC slot is fetched: sock_hold(&smc->sk); read_unlock_bh(&lgr->conns_lock); /* pre-fetch buffer outside of send_lock, might sleep */ rc = smc_cdc_get_free_slot(conn, to_lnk, &wr_buf, NULL, &pend); if (rc) goto err_out; The err_out label only drops the wr_tx link reference, so this early exit returns without the matching sock_put(). The second error exit is not affected, because sock_put() has already run by then. A leaked sk_refcnt means the smc_sock is never destroyed. Its send and receive buffers stay allocated, and for a user socket the reference held on the network namespace is never released, so the netns can no longer be torn down. smc_cdc_get_free_slot() fails when the target link goes down or when the connection has been killed while the switch is in progress. Both are reachable during the link failover this function implements, so the leak is triggered by the same hardware events that make smc_switch_conns() run in the first place. Restructure so there is a single sock_put() covering both outcomes, instead of adding a second one to the error path. | ||||
| CVE-2026-80967 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcxhr: initialize mutexes before requesting threaded IRQ pcxhr_probe() requests pcxhr_threaded_irq() before initializing mgr->lock, even though the threaded handler takes that mutex. Initialize the manager locks before request_threaded_irq() so an early interrupt cannot run against uninitialized mutex state during probe. | ||||
| CVE-2026-74754 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: pair EH runtime PM get and put shost->eh_noresume is currently consulted twice in one error handling iteration: once before scsi_autopm_get_host() and once again before scsi_autopm_put_host(). That is racy when a PM-triggered error path flips shost->eh_noresume while the SCSI EH thread is still running. The problem flow looks like this: PM path ufshcd_set_dev_pwr_mode() shost->eh_noresume = 1 ufshcd_execute_start_stop <-- trigger EH ... shost->eh_noresume = 0 EH path scsi_error_handler() if (!shost->eh_noresume) scsi_autopm_get_host() <-- skipped ... if (!shost->eh_noresume) scsi_autopm_put_host() <-- executed later In that case one EH iteration can skip autoresume on entry and still drop a runtime PM reference on exit. That leaves an unmatched runtime PM put and can trigger a runtime PM usage count underflow. Fix this by making eh_noresume a regular bool so it can be accessed with READ_ONCE() and WRITE_ONCE(). Snapshot it once per EH iteration and use that snapshot for both runtime PM get and put decisions. | ||||
| CVE-2026-74735 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: fix tunnel and session refcount leak on seq_file release In pppol2tp_proc_open() and l2tp_dfs_seq_open(), iteration state (pd->tunnel and pd->session) is kept in seq_file private data to allow iteration across multiple read() system calls. However, if userspace closes /proc/net/pppol2tp or /sys/kernel/debug/l2tp/tunnels before reading to end-of-file (EOF), any tunnel or session reference stored in pd->tunnel / pd->session is left un-dropped when seq_file private data is freed. Fix this by dropping any remaining pd->tunnel and pd->session references in pppol2tp_proc_release() and l2tp_dfs_seq_release() when closing the file. | ||||
| CVE-2026-74695 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_flow_table: drop existing skb dst before skb_dst_set_noref() Incoming skbs passing through netfilter flowtable offload hooks (or XFRM offload path) might already carry a ref-counted dst_entry assigned during earlier RX or routing steps. Calling skb_dst_set_noref() when skb already holds a ref-counted dst overwrites skb->_skb_refdst, leaking the previous dst_entry reference count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in skb_dst_check_unset(): WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170 WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234 WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864 Drop any existing dst_entry reference with skb_dst_drop(skb) before setting the non-referenced flowtable destination. | ||||
| CVE-2026-74405 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: OPP: Fix race between OPP addition and lookup A race exists between dev_pm_opp_add_dynamic() and dev_pm_opp_find_freq_exact(): CPU0 (add) CPU1 (lookup) ------------------------------- ------------------------------ _opp_add() mutex_lock() list_add(&new_opp->node, head) mutex_unlock() _opp_table_find_key() mutex_lock() dev_pm_opp_get(opp) kref_get() mutex_unlock() kref_init(&new_opp->kref) dev_pm_opp_put() kref_put_mutex() The newly added OPP is inserted into the list before its kref is initialized. A concurrent lookup can find this OPP and increment its reference count while it is still uninitialized, leading to refcount corruption and a potential premature free. Fix this by initializing ->kref and ->opp_table before making the OPP visible via list_add(). This ensures any concurrent lookup observes a fully initialized object. [ Viresh: Updated commit log ] | ||||
| CVE-2026-74386 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix page fragment cache leak in error path In nvmet_tcp_alloc_queue(), when a connection is closed during the allocation process (e.g., nvmet_tcp_set_queue_sock() returns -ENOTCONN), the error handling jumps to out_destroy_sq and then to out_ida_remove without draining the page fragment cache. Although nvmet_tcp_free_cmd() is called in some error paths to release individual page fragments, the underlying page cache reference held by queue->pf_cache is never released. The first allocation using pf_cache is the call to nvmet_tcp_alloc_cmd() for queue->connect, which happens after ida_alloc() returns successfully. This results in a page leak each time a connection fails during allocation, which could lead to memory exhaustion over time if connections are repeatedly opened and closed. Fix this by calling page_frag_cache_drain() before freeing the queue structure in the out_ida_remove label. | ||||
| CVE-2026-74347 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount Add a refcount for struct nf_ct_timeout which is used by ct extension to set the custom ct timeout policy, this tells us that the ct timeout is being used by a conntrack entry. When the last conntrack entry drops the refcount on the ct timeout, the ct timeout is released. Remove the refcount for control plane which controls if the ruleset refers to the timeout policy. After this update, it is possible to remove the ct timeout policy from nfnetlink_cttimeout immediately. This is for simplicity not to handle two refcounts on a single object. Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just hold a reference to the nf_ct_timeout object until packet is reinjected, since this is part of the ct extension, this will be released by the time the conntrack is freed. nf_ct_untimeout() is still called to clean up in a best effort basis: the ct timeout on existing entries gets removed when the ct timeout goes away, but as long as the iptables ruleset still refers to the ct timeout through a template, new conntracks may keep attaching it and extend its lifetime until the rule is removed. nf_ct_untimeout() is not called anymore from module removal path, this is unlikely to find timeouts give module refcount is bumped, and the new refcount already tracks the ct timeout policy use so it is released when unused. | ||||
| CVE-2026-74261 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: avoid stale FIFO cells during resize snd_seq_fifo_resize() still needs to publish the replacement pool before it waits for FIFO users. A blocking snd_seq_read() holds f->use_lock while it sleeps, so concurrent senders must be able to queue to the new pool and wake that reader instead of failing against a closing old pool. However, snd_seq_fifo_event_in() duplicates an event before it takes f->lock, and snd_seq_read() can dequeue a cell and later call snd_seq_fifo_cell_putback() if copy_to_user() or snd_seq_expand_var_event() fails. If resize swaps f->pool and detaches oldhead in between, either path can relink an old-pool cell after the snapshot. That stale cell sits outside the drained oldhead list, keeps oldpool->counter elevated, and can leave snd_seq_pool_delete() waiting for the retired pool to drain. Keep the existing swap-before-wait ordering in snd_seq_fifo_resize(), but reject stale cells before any FIFO relink. Revalidate event-in cells under f->lock and retry them against the published replacement pool, and free stale putback cells instead of linking them back into the FIFO. The buggy scenario involves two paths, with each column showing the order within that path: resize path: relink path: 1. Allocate newpool. 1. Take f->use_lock. 2. Swap f->pool to newpool and 2. Duplicate or dequeue an old-pool detach oldhead. cell before oldpool closes. 3. Mark oldpool closing and 3. Reach a later relink point after wait for FIFO users. resize published newpool. 4. Free oldhead and delete 4. Relink the old-pool cell after oldpool. resize detached oldhead. 5. Drop f->use_lock. The reproducer reports a resize ioctl blocked in the expected pool teardown path: signal: resize iteration=98 target_pool=4 exceeded 250ms (elapsed=251ms) diagnostic: resize_tid=651 wchan=snd_seq_pool_done diagnostic: resize_tid=651 stack= snd_seq_pool_done+0x5b/0x140 snd_seq_pool_delete+0x7a/0x90 snd_seq_fifo_resize+0x193/0x1e0 snd_seq_ioctl_set_client_pool+0x214/0x260 snd_seq_ioctl+0x119/0x540 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f A second run with larger pools hit the same target path: signal: resize iteration=32 target_pool=64 exceeded 250ms (elapsed=251ms) diagnostic: resize_tid=663 wchan=snd_seq_pool_done diagnostic: resize_tid=663 stack= snd_seq_pool_done+0x5b/0x140 snd_seq_pool_delete+0x7a/0x90 snd_seq_fifo_resize+0x193/0x1e0 snd_seq_ioctl_set_client_pool+0x214/0x260 snd_seq_ioctl+0x119/0x540 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-72440 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1: fix writes_pending and barrier reference leaks on write failures raid1_make_request() acquires a writes_pending reference with md_write_start() before calling raid1_write_request(). Several failure paths in raid1_write_request() complete the bio and return without reaching the normal write completion path, causing the corresponding md_write_end() to be skipped. Make raid1_write_request() return a status indicating whether the write request was successfully queued. This allows raid1_make_request() to call md_write_end() when raid1_write_request() fails. Additionally, if wait_blocked_rdev() fails after wait_barrier() succeeds, the associated barrier reference is not released. Call allow_barrier() before returning from that path to keep the barrier accounting balanced. | ||||
| CVE-2026-72439 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix writes_pending leak on write request failures raid10_make_request() acquires a writes_pending reference with md_write_start() before dispatching write requests. Several failure paths in raid10_write_request() complete the bio and return without reaching the normal write completion path, causing the corresponding md_write_end() to be skipped. Make raid10_write_request() return a status indicating whether the write request was successfully queued. This allows raid10_make_request() to release the writes_pending reference with md_write_end() when a write request fails. | ||||
| CVE-2026-72375 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix reinitialisation of the inode, in particular ->lock_work It seems that initalising afs_vnode::lock_work a single time in the slab's init function isn't sufficient for work_structs. This results in the DEBUG_OBJECTS debugging stuff producing a warning occasionally when running the generic/131 xfstest: ODEBUG: activate not available (active state 0) object: 0000000016d8760f object type: work_struct hint: afs_lock_work+0x0/0x220 WARNING: lib/debugobjects.c:629 at debug_print_object+0x4b/0x90, CPU#3: locktest/7695 ... CPU: 3 UID: 0 PID: 7695 Comm: locktest Tainted: G S 7.1.0-build3+ #2771 PREEMPT ... RIP: 0010:debug_print_object+0x65/0x90 ... Call Trace: <TASK> ? __pfx_afs_lock_work+0x10/0x10 debug_object_activate+0x122/0x170 insert_work+0x25/0x60 __queue_work+0x2e0/0x340 queue_delayed_work_on+0x48/0x70 afs_fl_release_private+0x57/0x70 locks_release_private+0x5c/0xa0 locks_free_lock+0xe/0x20 posix_lock_inode+0x55f/0x5b0 locks_lock_inode_wait+0x81/0x140 ? file_write_and_wait_range+0x50/0x70 afs_lock+0xcd/0x110 fcntl_setlk+0x10d/0x260 do_fcntl+0x24e/0x5b0 __do_sys_fcntl+0x6a/0x90 do_syscall_64+0x11e/0x310 entry_SYSCALL_64_after_hwframe+0x71/0x79 Fix this by reinitialising ->lock_work after allocating an inode. Also, flush ->lock_work when the inode is being evicted to make sure it's not still running. | ||||
| CVE-2026-72321 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: Fix potential memory leaks in igmp_mod_timer() and igmp_stop_timer() When a timer is deleted and not re-armed in igmp_mod_timer(), or stopped in igmp_stop_timer(), the code currently decrements the reference counter of the multicast list entry @im using refcount_dec(&im->refcnt). However, both functions can be called from the RCU reader path: - igmp_mod_timer() via igmp_heard_query() -> for_each_pmc_rcu() - igmp_stop_timer() via igmp_rcv() -> igmp_heard_report() If the group im was concurrently removed from the list by ip_mc_dec_group(), its reference count might have already been decremented to 1. In this case, timer_delete() succeeds, and refcount_dec() decrements the refcount from 1 to 0. Since refcount_dec() does not free the object when it hits 0 (unlike ip_ma_put()), the im structure is leaked. Fix this by using ip_ma_put(im) instead of refcount_dec(&im->refcnt), and deferring the put until after the spinlock is released. | ||||
| CVE-2026-68312 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths In cifs_close_deferred_file(), cifs_close_all_deferred_files(), and cifs_close_deferred_file_under_dentry(), when a pending deferred close is cancelled via cancel_delayed_work(), the subsequent kmalloc_obj() to add the file to the local processing list may fail under memory pressure. The loop breaks immediately, but the cancelled work is no longer pending (it would have called _cifsFileInfo_put()), and the cfile is never added to file_head for processing. The cifsFileInfo reference and the open server handle both leak. Fix by saving the cfile that failed allocation in a local variable, breaking as before, and calling _cifsFileInfo_put() on it after releasing the lock. Any files later in the iteration are unaffected since their deferred work is still pending and will fire normally. | ||||
| CVE-2026-64345 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_printer: take kref only for successful open printer_open() returns -EBUSY when the character device is already open, but it increments dev->kref regardless of the return value. VFS does not call ->release() for a failed open, so every rejected second open permanently leaks one reference. Move kref_get() into the successful-open branch. | ||||
| CVE-2026-53262 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: pppol2tp: hold reference to session in pppol2tp_ioctl() pppol2tp_ioctl() read sock->sk->sk_user_data directly without any locks or reference counting. If a controllable sleep was induced during copy_from_user() (e.g. via a userfaultfd page fault sleep), a concurrent socket close could trigger pppol2tp_session_close() asynchronously. This frees the l2tp_session structure via the l2tp_session_del_work workqueue. Upon resuming, the ioctl thread dereferences the stale session pointer, resulting in a Use-After-Free (UAF). Fix this by securely fetching the session reference using the RCU-safe, refcounted helper pppol2tp_sock_to_session(sk) on entry. This locks the session's refcount across the sleep. We structured the function to exit via standard err breaks, guaranteeing that l2tp_session_put() is cleanly called on all return paths to drop the reference. To preserve existing behavior we validate the session and its magic signature only for the specific L2TP commands that require it. This ensures that generic/unknown ioctls called on an unconnected socket still return -ENOIOCTLCMD and correctly fall back to generic handlers (e.g. in sock_do_ioctl()). | ||||