Export limit exceeded: 55230 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (55230 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72406 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sungem: fix probe error cleanup gem_init_one() calls gem_remove_one() when register_netdev() fails. gem_remove_one() unregisters and frees resources owned by the net_device, including the DMA block, MMIO mapping, PCI regions, and the net_device itself. gem_init_one() then falls through to its own cleanup labels and frees the same resources again. Keep the register_netdev() error path in gem_init_one(): clear drvdata so PM/remove paths do not see a half-registered device, remove the NAPI instance added during probe, and let the existing cleanup labels release the resources once. The issue was found by a local static-analysis checker for probe error paths. The reported path was manually inspected before sending this fix. Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed because no sungem hardware is available. | ||||
| CVE-2026-72400 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: seg6: validate SRH length before reading fixed fields seg6_validate_srh() reads fixed SRH fields such as srh->type and srh->hdrlen before checking that the supplied length covers the fixed struct ipv6_sr_hdr fields. The BPF SEG6 encap path reaches this with a BPF program-supplied pointer and length: bpf_lwt_push_encap() and the SEG6 local BPF END_B6 and END_B6_ENCAP actions call bpf_push_seg6_encap(), which forwards the length to seg6_validate_srh() with no minimum-size guard. A 2-byte SEG6 encap header can therefore make the validator read srh->type at offset 2 beyond the caller-supplied buffer. Reject lengths shorter than the fixed SRH at the top of seg6_validate_srh(), before any field is read. This fixes the BPF helper path and keeps the common validator robust. | ||||
| CVE-2026-72360 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays Currently defined VF/PF relay actions use regular REQUEST messages only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT messages as this would result in breaking the VFPF ABI protocol and also might trigger an assert on the PF side. (cherry picked from commit 1714d360fc5ae2e0886a69e979095d9c7ff3568a) | ||||
| CVE-2026-72351 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gue: validate REMCSUM private option length GUE private flags can indicate that remote checksum offload metadata is present. The private flags field itself is accounted for by guehdr_flags_len(), but guehdr_priv_flags_len() currently returns 0 even when GUE_PFLAG_REMCSUM is set. This lets a packet with only the private flags field pass validate_gue_flags(), after which gue_remcsum() and gue_gro_remcsum() read the missing REMCSUM start/offset fields from the following bytes. Account for GUE_PLEN_REMCSUM when GUE_PFLAG_REMCSUM is present so that malformed packets are rejected during option validation. | ||||
| CVE-2026-72350 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_u32: reject invalid shift counts u32_match_it() executes rule-supplied shift operands on a 32-bit value. A malformed u32 rule can provide a shift count of 32 or more, triggering an undefined shift out-of-bounds during packet evaluation. Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in u32_mt_checkentry() and reject malformed rules before they reach the packet path. | ||||
| CVE-2026-72348 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop The ah, hbh and rt matches check that the fixed extension header is present, then use the header length field to derive the advertised extension header length for matching. For the ah match, add the missing advertised-length check. For hbh and rt, update the existing advertised-length checks. In all three cases, set hotdrop to true before returning false when the advertised extension header length exceeds the available skb data. Returning false treats the packet as a rule mismatch. Set hotdrop to true and drop malformed packets so they cannot bypass rules intended to drop packets with these IPv6 extension headers. | ||||
| CVE-2026-72347 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_connmark: reject invalid shift parameters Revision 2 of the CONNMARK target accepts user-controlled shift parameters and applies them to 32-bit mark values in connmark_tg_shift(). A shift_bits value of 32 or more triggers an undefined-shift bug when the rule is evaluated. Invalid shift_dir values are also accepted and silently fall back to the left-shift path. Reject invalid revision-2 shift parameters in connmark_tg_check() so malformed rules fail at installation time, before they can reach the packet path. | ||||
| CVE-2026-108129 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-16 | 6.5 Medium |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. | ||||
| CVE-2026-72345 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, Fix off-by-one in single-FDB error rollback On failure at index i, the reverse cleanup loop in mlx5_lag_create_single_fdb() starts from i, so the failed index itself is rolled back. That can operate on uninitialized state or double-tear-down a rule the add_one path already self-rolled-back. Start the rollback from i - 1 so only successfully-installed entries are undone. | ||||
| CVE-2026-72339 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: qede: fix off-by-one in BD ring consumption on build_skb failure qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a NULL return from qede_build_skb(). When it returns NULL under memory pressure, the functions still consume a BD from the ring before returning NULL. The callers then recycle additional BDs, resulting in one extra BD being consumed (off-by-one). This desynchronizes the BD ring, which can corrupt DMA page reference counts and lead to SLUB freelist corruption. Commit 4e910dbe3650 ("qede: confirm skb is allocated before using") added a NULL check inside qede_build_skb() to prevent a NULL pointer dereference, but did not address the missing NULL checks in the callers, making this off-by-one reachable. Fix this by adding NULL checks for the return value of qede_build_skb() in both qede_rx_build_skb() and qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring manipulation. | ||||
| CVE-2026-72319 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: ensure inner headers in ICMP errors are in headroom Sashiko points out that after stripping the outer headers with pskb_pull() we should ensure the inner IP headers in ICMP errors from tunnels are present in the skb headroom for functions like ipv4_update_pmtu(), icmp_send() and IP_VS_DBG(). Also, add more checks for the length of the inner headers. | ||||
| CVE-2026-72318 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: cifs: validate DFS referral string offsets parse_dfs_referrals() validates that the response header and referral array fit in the received buffer, but each referral also contains string offsets supplied by the server. Those offsets are used to compute the DfsPath and NetworkAddress string pointers without checking whether they still point inside the response buffer. A malformed referral can therefore make the computed pointer exceed the end of the buffer. The resulting negative max_len is then passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it to kstrndup() as a size_t, allowing strnlen() to read out of bounds. Validate each string offset before deriving the string pointer. | ||||
| CVE-2026-72314 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK Compare against -EDEADLK, which is what ww_mutex_lock() actually returns and what every other deadlock check in this file already uses. Function regulator_lock_two() acquires two regulators via regulator_lock_nested() -> ww_mutex_lock(). On contention, ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop the lock it holds and retry the acquisition in the canonical order. However, regulator_lock_two() tests the return value against -EDEADLOCK rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are the same value, so the comparison happens to be correct and the bug is invisible. But on MIPS, SPARC, and PowerPC, those two errors have different values. The test is wrong: a genuine -EDEADLK backoff no longer matches -EDEADLOCK, so instead of unlocking and retrying, the code falls into WARN_ON(ret) and returns with only one of the two regulators locked. In practice, this is a bug only on MIPS, because the regulator core is not built or used on the other two platforms. In general, EDEADLK is preferred over EDEADLOCK for new code. | ||||
| CVE-2026-72310 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix overflow in passthrough ioctl bounds check smb2_ioctl_query_info() validates the PASSTHRU_FSCTL response payload before copying it to userspace. The payload offset and length both come from 32-bit fields. The bounds check currently adds OutputOffset and qi.input_buffer_length directly, so the addition can wrap in 32-bit arithmetic before the result is compared against the response buffer length. A malicious server can use a large OutputOffset and a small OutputCount to make the wrapped sum pass the bounds check. The later copy_to_user() then reads from io_rsp + OutputOffset, outside the response buffer. Use size_add() for the offset plus length check so overflow is treated as out of bounds. | ||||
| CVE-2026-72303 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-control: Validate notification payload size Validate MODULE_NOTIFICATION payload length before reading bytes/channel data in control update handling. | ||||
| CVE-2026-72302 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Use overflow checks in control_update size calc In sof_ipc3_control_update(), the expected_size calculation uses firmware-provided cdata->num_elems in arithmetic that could overflow on 32-bit platforms, wrapping to a small value. This would allow the cdata->rhdr.hdr.size comparison to pass with mismatched sizes, potentially leading to out-of-bounds access in snd_sof_update_control. Use check_mul_overflow() and check_add_overflow() to detect and reject overflowed size calculations. | ||||
| CVE-2026-72298 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post() qrtr_endpoint_post() validates an incoming packet with if (!size || len != ALIGN(size, 4) + hdrlen) goto err; where size comes from the wire. On 32-bit, size_t is 32 bits and ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check passes and skb_put_data(skb, data + hdrlen, size) writes past the hdrlen-sized skb and oopses the kernel. 64-bit is unaffected. This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB Read in qrtr_endpoint_post"), which fixed only the 64-bit case. Reject any size that cannot fit the buffer before the ALIGN. | ||||
| CVE-2026-72297 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: atm: reject out-of-range traffic classes in QoS validation Reject ATM traffic classes above ATM_ANYCLASS in check_tp(). SO_ATMQOS stores the supplied QoS after check_qos() succeeds, so accepting larger values leaves invalid traffic_class values in vcc->qos. That bad state later reaches pvc_info(), which indexes class_name[] with vcc->qos.{rx,tp}.traffic_class. Values above ATM_ANYCLASS cause an out-of-bounds read when /proc/net/atm/pvc is read. Tighten the existing QoS validation so invalid traffic_class values are rejected at the point where user supplied QoS is accepted. | ||||
| CVE-2026-72296 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ife: require ETH_HLEN to be pullable in ife_decode() ife decode may return after making only the outer IFE header and metadata pullable. The caller then passes the decapsulated packet to eth_type_trans(), which expects the inner Ethernet header to be accessible from the linear data area. With a malformed IFE frame, the inner Ethernet header may still be shorter than ETH_HLEN in the linear area, which can lead to a crash in the original code. Fix this by extending the pull check in ife_decode() so that the inner Ethernet header is also guaranteed to be pullable before returning. | ||||
| CVE-2026-72289 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Check the interrupt is still ours before migrating it vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating an interrupt to another vCPU. After reacquiring the locks it only checks that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq)) before moving the interrupt, which assumes that an interrupt whose affinity is preserved is still queued on this vCPU's ap_list. That assumption no longer holds if the interrupt is taken off the ap_list while the locks are dropped. vgic_flush_pending_lpis() removes the interrupt from the list and sets irq->vcpu to NULL, but leaves enabled/pending/target_vcpu untouched. As the interrupt is still enabled and pending, vgic_target_oracle() returns the same target_vcpu, so the affinity check passes and list_del() is run a second time on an entry that has already been removed. Also check that the interrupt is still assigned to this vCPU (irq->vcpu == vcpu) before moving it. | ||||