Export limit exceeded: 10636 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10636 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-6973 | 2026-04-15 | 7.8 High | ||
| Use After Free vulnerability exists in the JT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted JT file. | ||||
| CVE-2024-46973 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. | ||||
| CVE-2025-6971 | 2026-04-15 | 7.8 High | ||
| Use After Free vulnerability exists in the CATPRODUCT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted CATPRODUCT file. | ||||
| CVE-2024-0147 | 1 Nvidia | 1 Gpu Display Driver | 2026-04-15 | 5.5 Medium |
| NVIDIA GPU display driver for Windows and Linux contains a vulnerability where referencing memory after it has been freed can lead to denial of service or data tampering. | ||||
| CVE-2025-15062 | 1 Trimble | 1 Sketchup | 2026-04-15 | N/A |
| Trimble SketchUp SKP File Parsing Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Trimble SketchUp. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of SKP files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27769. | ||||
| CVE-2025-50518 | 1 Libcoap | 1 Libcoap | 2026-04-15 | 9.8 Critical |
| A use-after-free vulnerability exists in the coap_delete_pdu_lkd function within coap_pdu.c of the libcoap library. This issue occurs due to improper handling of memory after the freeing of a PDU object, leading to potential memory corruption or the possibility of executing arbitrary code. NOTE: this is disputed by the Supplier because it only occurs when an application uses libcoap incorrectly. | ||||
| CVE-2025-7042 | 2026-04-15 | 7.8 High | ||
| Use After Free vulnerability exists in the IPT file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted IPT file. | ||||
| CVE-2025-40001 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mvsas: Fix use-after-free bugs in mvs_work_queue During the detaching of Marvell's SAS/SATA controller, the original code calls cancel_delayed_work() in mvs_free() to cancel the delayed work item mwq->work_q. However, if mwq->work_q is already running, the cancel_delayed_work() may fail to cancel it. This can lead to use-after-free scenarios where mvs_free() frees the mvs_info while mvs_work_queue() is still executing and attempts to access the already-freed mvs_info. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) mvs_pci_remove() | mvs_free() | mvs_work_queue() cancel_delayed_work() | kfree(mvi) | | mvi-> // UAF Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work item completes before the mvs_info is deallocated. This bug was found by static analysis. | ||||
| CVE-2024-41168 | 2026-04-15 | 7.4 High | ||
| Use after free in some Intel(R) PROSet/Wireless WiFi and Killerâ„¢ WiFi software for Windows before version 23.80 may allow an unauthenticated user to potentially enable denial of service via adjacent access. | ||||
| CVE-2025-14569 | 1 Ggml | 1 Whisper.cpp | 2026-04-15 | 5.3 Medium |
| A vulnerability was detected in ggml-org whisper.cpp up to 1.8.2. Affected is the function read_audio_data of the file /whisper.cpp/examples/common-whisper.cpp. The manipulation results in use after free. The attack requires a local approach. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2024-43703 | 1 Imaginationtech | 1 Ddk | 2026-04-15 | 8.1 High |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to achieve unauthorised reads and writes of physical memory from the GPU HW. | ||||
| CVE-2025-9020 | 1 Dronecode | 1 Px4 Drone Autopilot | 2026-04-15 | 4.5 Medium |
| A vulnerability was found in PX4 PX4-Autopilot up to 1.15.4. This issue affects the function MavlinkReceiver::handle_message_serial_control of the file src/modules/mavlink/mavlink_receiver.cpp of the component Mavlink Shell Closing Handler. The manipulation of the argument _mavlink_shell leads to use after free. An attack has to be approached locally. The complexity of an attack is rather high. The exploitation is known to be difficult. The identifier of the patch is 4395d4f00c49b888f030f5b43e2a779f1fa78708. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2024-43701 | 1 Imaginationtech | 1 Graphics Ddk | 2026-04-15 | 7.8 High |
| Software installed and run as a non-privileged user may conduct GPU system calls to read and write freed physical memory from the GPU. | ||||
| CVE-2025-33217 | 1 Nvidia | 6 Display Driver, Geforce, Quadro and 3 more | 2026-04-15 | 7.8 High |
| NVIDIA Display Driver for Windows contains a vulnerability where an attacker could trigger a use after free. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, denial of service, and information disclosure. | ||||
| CVE-2024-3299 | 2026-04-15 | 7.8 High | ||
| Out-Of-Bounds Write, Use of Uninitialized Resource and Use-After-Free vulnerabilities exist in the file reading procedure in eDrawings from Release SOLIDWORKS 2023 through Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted SLDDRW or SLDPRT file. NOTE: this vulnerability was SPLIT from CVE-2024-1847. | ||||
| CVE-2025-0835 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to corrupt kernel heap memory. | ||||
| CVE-2024-47891 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. | ||||
| CVE-2024-46971 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct GPU system calls to read and write freed physical memory from the GPU. | ||||
| CVE-2024-47898 | 2026-04-15 | 7.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger use-after-free kernel exceptions. | ||||
| CVE-2025-11677 | 1 Warmcat | 1 Libwebsockets | 2026-04-15 | 3.7 Low |
| Use After Free in WebSocket server implementation in lws_handshake_server in warmcat libwebsockets may allow an attacker, in specific configurations where the user provides a callback function that handles LWS_CALLBACK_HTTP_CONFIRM_UPGRADE, to achieve denial of service. | ||||