Export limit exceeded: 26160 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26160 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53711 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Fix a potential data corruption We must ensure that the subrequests are joined back into the head before we can retransmit a request. If the head was not on the commit lists, because the server wrote it synchronously, we still need to add it back to the retransmission list. Add a call that mirrors the effect of nfs_cancel_remove_inode() for O_DIRECT. | ||||
| CVE-2023-53729 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: soc: qcom: qmi_encdec: Restrict string length in decode The QMI TLV value for strings in a lot of qmi element info structures account for null terminated strings with MAX_LEN + 1. If a string is actually MAX_LEN + 1 length, this will cause an out of bounds access when the NULL character is appended in decoding. | ||||
| CVE-2023-54210 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor() KASAN reports that there's a use-after-free in hci_remove_adv_monitor(). Trawling through the disassembly, you can see that the complaint is from the access in bt_dev_dbg() under the HCI_ADV_MONITOR_EXT_MSFT case. The problem case happens because msft_remove_monitor() can end up freeing the monitor structure. Specifically: hci_remove_adv_monitor() -> msft_remove_monitor() -> msft_remove_monitor_sync() -> msft_le_cancel_monitor_advertisement_cb() -> hci_free_adv_monitor() Let's fix the problem by just stashing the relevant data when it's still valid. | ||||
| CVE-2023-54223 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: xsk: Fix invalid buffer access for legacy rq The below crash can be encountered when using xdpsock in rx mode for legacy rq: the buffer gets released in the XDP_REDIRECT path, and then once again in the driver. This fix sets the flag to avoid releasing on the driver side. XSK handling of buffers for legacy rq was relying on the caller to set the skip release flag. But the referenced fix started using fragment counts for pages instead of the skip flag. Crash log: general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ #31 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28 Code: ... RSP: 0018:ffff88810082fc98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901 RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006 R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000 R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00 FS: 0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? die_addr+0x32/0x80 ? exc_general_protection+0x192/0x390 ? asm_exc_general_protection+0x22/0x30 ? 0xffffffffa000b514 ? bpf_prog_03b13f331978c78c+0xf/0x28 mlx5e_xdp_handle+0x48/0x670 [mlx5_core] ? dev_gro_receive+0x3b5/0x6e0 mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core] mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core] mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core] mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core] __napi_poll+0x25/0x1a0 net_rx_action+0x28a/0x300 __do_softirq+0xcd/0x279 ? sort_range+0x20/0x20 run_ksoftirqd+0x1a/0x20 smpboot_thread_fn+0xa2/0x130 kthread+0xc9/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2023-54234 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization Commit c1af985d27da ("scsi: mpi3mr: Add Event acknowledgment logic") introduced an array mrioc->evtack_cmds but initialization of the array elements was missed. They are just zero cleared. The function mpi3mr_complete_evt_ack() refers host_tag field of the elements. Due to the zero value of the host_tag field, the function calls clear_bit() for mrico->evtack_cmds_bitmap with wrong bit index. This results in memory access to invalid address and "BUG: KASAN: use-after-free". This BUG was observed at eHBA-9600 firmware update to version 8.3.1.0. To fix it, add the missing initialization of mrioc->evtack_cmds. | ||||
| CVE-2023-53695 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: udf: Detect system inodes linked into directory hierarchy When UDF filesystem is corrupted, hidden system inodes can be linked into directory hierarchy which is an avenue for further serious corruption of the filesystem and kernel confusion as noticed by syzbot fuzzed images. Refuse to access system inodes linked into directory hierarchy and vice versa. | ||||
| CVE-2023-53718 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Do not swap cpu_buffer during resize process When ring_buffer_swap_cpu was called during resize process, the cpu buffer was swapped in the middle, resulting in incorrect state. Continuing to run in the wrong state will result in oops. This issue can be easily reproduced using the following two scripts: /tmp # cat test1.sh //#! /bin/sh for i in `seq 0 100000` do echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 done /tmp # cat test2.sh //#! /bin/sh for i in `seq 0 100000` do echo irqsoff > /sys/kernel/debug/tracing/current_tracer sleep 1 echo nop > /sys/kernel/debug/tracing/current_tracer sleep 1 done /tmp # ./test1.sh & /tmp # ./test2.sh & A typical oops log is as follows, sometimes with other different oops logs. [ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8 [ 231.713375] Modules linked in: [ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 231.716750] Hardware name: linux,dummy-virt (DT) [ 231.718152] Workqueue: events update_pages_handler [ 231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 231.721171] pc : rb_update_pages+0x378/0x3f8 [ 231.722212] lr : rb_update_pages+0x25c/0x3f8 [ 231.723248] sp : ffff800082b9bd50 [ 231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0 [ 231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a [ 231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000 [ 231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510 [ 231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002 [ 231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558 [ 231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001 [ 231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000 [ 231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208 [ 231.744196] Call trace: [ 231.744892] rb_update_pages+0x378/0x3f8 [ 231.745893] update_pages_handler+0x1c/0x38 [ 231.746893] process_one_work+0x1f0/0x468 [ 231.747852] worker_thread+0x54/0x410 [ 231.748737] kthread+0x124/0x138 [ 231.749549] ret_from_fork+0x10/0x20 [ 231.750434] ---[ end trace 0000000000000000 ]--- [ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 233.721696] Mem abort info: [ 233.721935] ESR = 0x0000000096000004 [ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits [ 233.722596] SET = 0, FnV = 0 [ 233.722805] EA = 0, S1PTW = 0 [ 233.723026] FSC = 0x04: level 0 translation fault [ 233.723458] Data abort info: [ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000 [ 233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 233.726720] Modules linked in: [ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 233.727777] Hardware name: linux,dummy-virt (DT) [ 233.728225] Workqueue: events update_pages_handler [ 233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 233.729054] pc : rb_update_pages+0x1a8/0x3f8 [ 233.729334] lr : rb_update_pages+0x154/0x3f8 [ 233.729592] sp : ffff800082b9bd50 [ 233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 00000000 ---truncated--- | ||||
| CVE-2023-53705 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix out-of-bounds access in ipv6_find_tlv() optlen is fetched without checking whether there is more than one byte to parse. It can lead to out-of-bounds access. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-98098 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL deref in tipc_named_node_up() on empty publication list User-space applications can bind a large number of service addresses to one or more sockets. Each binding of a local-scope service address inserts one entry (publication) into the TIPC name table. If the number of these publications exceeds TIPC_MAX_PUBL (65535), protocol service types (such as node state and link state) are no longer inserted into the name table. This causes two issues: 1. User-space applications subscribing to node or link up/down events stop receiving notifications. 2. A NULL pointer dereference can occur: BUG: kernel NULL pointer dereference, address: 00000000000000d0 ... CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc4-default+ #5 PREEMPT(full) ... RIP: 0010:tipc_named_node_up (./include/linux/skbuff.h:2251 net/tipc/name_distr.c:195 net/tipc/name_distr.c:221) ... Call Trace: <IRQ> tipc_node_write_unlock (net/tipc/node.c:428) tipc_rcv (net/tipc/node.c:934 net/tipc/node.c:2189) tipc_udp_recv (net/tipc/udp_media.c:389) Thread 1 (tipc_net_finalize) | Thread 2 (named_distribute) -----------------------------|----------------------------- | ... | list_for_each_entry(publ, pls, binding_node) { | ... | __skb_queue_tail(list, skb); | ... | } | ... | hdr = buf_msg(skb_peek_tail(list)); ... | tipc_nametbl_publish(); | If 'tipc_nametbl_publish()' (Thread 1) fails because the number of local publications reaches TIPC_MAX_PUBL, list (Thread 2) will be empty. As a result, NULL is passed to 'buf_msg()', leading to a NULL pointer dereference. Fix these issues by allowing protocol service types (node state, link state, and topology server) to be inserted into the name table unconditionally. This ensures that users subscribing to these types always receive notifications. In addition, the maximum number of local user publications is reduced to (TIPC_MAX_PUBL - 1). This ensures that the maximum bulk size calculated in tipc_link_set_queue_limits() remains valid. | ||||
| CVE-2026-98097 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: Dont send random pad bytes in RESET/ACTIVATE messages The interface name is passed in a fixed length (TIPC_MAX_IF_NAME) buffer. Replace the strcpy(data, l->if_name) with memcpy() so that the pad bytes are actually written (l->if_name[] is zero padded) rather than sending random bytes from the skb to the remote system. Replace two other strcpy() with strscpy(). | ||||
| CVE-2026-98113 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: rate limit unmapped SID errors A client can include many structurally valid but unmapped SIDs in a DACL. Logging every mapping failure lets one request generate hundreds of kernel error messages. Rate limit the message to prevent an authenticated client from flooding the kernel log. | ||||
| CVE-2026-98112 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix listener task lifetime on netdev events The listener thread exits when its listening socket is shutdown. The netdevice notifier shuts down the socket before calling kthread_stop(), so the task_struct can be freed before kthread_stop() gets its reference. Create the listener in a stopped state and hold an extra task_struct reference until kthread_stop_put() completes. Also stop and release listeners before freeing their interface records during TCP teardown. | ||||
| CVE-2026-98111 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: validate version TLV value lengths btintel_parse_version_tlv() verifies that a complete TLV is present in the response, but it does not ensure that the value is long enough for the specific TLV type. A short value can therefore cause an out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(), or memcpy(). Reject values shorter than the minimum required by each known TLV type. Also reject responses that do not contain the Command Complete Status field. | ||||
| CVE-2026-98110 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: bound firmware ID by TLV length The firmware ID is treated as a NUL-terminated string even though the TLV length is its only boundary. If the value does not contain a NUL terminator, snprintf() can read beyond the received response. Limit the conversion to the advertised TLV value length. | ||||
| CVE-2026-63939 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Compute the correct max length of the in-GHCB scratch area When setting the length of the GHCB scratch area, and the area is in the GHCB shared buffer, set the effective length of the scratch area to the max possible size given the start of the guest-provided pointer, and the end of the shared buffer. The code was "fine" when first introduced, as KVM doesn't consult the length of the buffer when emulating MMIO, because the passed in @len always specifies the *max* size required. But for PSC requests, the incoming @len is just the minimum length (to process the header), and KVM needs to know the full size of the scratch area to avoid buffer overflows (spoiler alert). Opportunistically rename @len => @min_len to better reflect its role. | ||||
| CVE-2026-63952 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: memfd: deny writeable mappings when implying SEAL_WRITE When SEAL_EXEC is added, SEAL_WRITE is implied to make W^X. But the implied seal is set after the check that makes sure the memfd can not have any writable mappings. This means one can use SEAL_EXEC to apply SEAL_WRITE while having writeable mappings. This breaks the contract that SEAL_WRITE provides and can be used by an attacker to pass a memfd that appears to be write sealed but can still be modified arbitrarily. Fix this by adding the implied seals before the call for mapping_deny_writable() is done. | ||||
| CVE-2026-63946 | 1 Linux | 1 Linux Kernel | 2026-10-28 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix UAF in iso_recv_frame iso_recv_frame reads conn->sk under iso_conn_lock but releases the lock before using sk, with no reference held. A concurrent iso_sock_kill() can free sk in that window, causing use-after-free on sk->sk_state and sock_queue_rcv_skb(). Fix by replacing the bare pointer read with iso_sock_hold(conn), which calls sock_hold() while the spinlock is held, atomically elevating the refcount before the lock drops. Add a drop_put label so sock_put() is called on all exit paths where the hold succeeded. | ||||
| CVE-2026-99193 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ti: icssm-prueth: Move setting of netops to fix crash icssm_prueth_netdev_init() calls of_phy_get_and_connect() before ndev->netdev_ops is assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads dev->netdev_ops through netdev_need_ops_lock() since the commit in question, so probing crashes with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled. Assign netdev_ops before the PHY attach, as was done for emac in commit 7c9f391ec89c ("net: emac: move setting of netops to fix crash"). | ||||
| CVE-2026-99209 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: skip eviction of a BO with no resource xe_evict_flags() switches on tbo->resource->mem_type to choose an eviction placement. An xe BO can reach eviction with no ttm.resource, e.g. an imported dma-buf BO whose resource was freed during teardown while its attachment is still live: the exporter then invalidates it via xe_dma_buf_move_notify() -> xe_bo_evict(), and the switch dereferences a NULL resource and faults. A BO with no resource has nothing placed or mapped, so there is nothing to evict. Return an empty placement (num_placement = 0), mirroring the handling already used for non-xe scatter-gather BOs just above; ttm_bo_validate() then takes the pipeline-gutting path and returns 0. Without the fix the xe_dma_buf@xe_test_dmabuf_move_notify_no_resource dynamic live selftest will fail with below stack. BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:xe_evict_flags+0xf4/0x140 [xe] Call Trace: <TASK> xe_bo_evict+0x40/0xa0 [xe] ? ttm_bo_pipeline_gutting+0x71/0x180 [ttm] xe_test_dmabuf_move_notify_no_resource+0x182/0x440 [xe] xe_dma_buf_kunit+0x387/0x580 [xe] v2: Add Fixes tag and failure info in commit text (Matt Brost) (cherry picked from commit dbcfaac6331f1fcb0c2fe3ad3e9adb1e5d43ec0c) | ||||
| CVE-2026-99215 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-28 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: core: prevent unregistering a power supply while a callback runs Once a power supply is registered, its callbacks can immediately start firing from other contexts, such as external_power_changed() triggered by the TCPM stack. If a power supply is unregistered while the callback is still running, the driver data can already be freed when the callback tries to access it, leading to a use-after-free. This happens e.g. when the hardware bus carrying the power supply device malfunctions (e.g. I2C is hogged down by another malfunctioning device) immediately after the power supply is registered, and thus the core is still processing the callbacks which were queued up when the driver starts the removal, leading in some cases to a kernel crash, e.g.: [ 11.645942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000005 [ 11.646751] Mem abort info: [ 11.647006] ESR = 0x0000000096000004 [ 11.647338] EC = 0x25: DABT (current EL), IL = 32 bits [ 11.647806] SET = 0, FnV = 0 [ 11.648077] EA = 0, S1PTW = 0 [ 11.648356] FSC = 0x04: level 0 translation fault [ 11.648785] Data abort info: [ 11.649041] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 11.649524] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 11.649981] GCS = 0, Overlay = 0, DirtyBit = 0 [ 11.650390] [0000000000000005] user address but active_mm is swapper [ 11.650955] Internal error: Oops: 0000000096000004 [#1] SMP [ 11.651460] Modules linked in: [ 11.651742] CPU: 1 UID: 0 PID: 144 Comm: kworker/1:2 Not tainted 7.2.0-rc6-g62a9297af2cd #1 PREEMPT [ 11.652553] Hardware name: Flipper One rev. F0B1C2 (DT) [ 11.653024] Workqueue: events power_supply_changed_work [ 11.653511] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 11.654135] pc : __power_supply_is_supplied_by+0x18/0x100 [ 11.654624] lr : __power_supply_am_i_supplied+0x40/0xb8 [ 11.655098] sp : ffff80008192bb30 [ 11.655399] x29: ffff80008192bb30 x28: 0000000000000000 x27: 0000000000000000 [ 11.656049] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 [ 11.656695] x23: ffff0000c19f4200 x22: ffffdb2232ba4ea8 x21: ffff80008192bc28 [ 11.657344] x20: ffff0000c1eef000 x19: ffff80008192bc18 x18: 00000000a0886e62 [ 11.657991] x17: 000000040044ffff x16: 04500072b5503510 x15: 0000000000000000 [ 11.658639] x14: 0000000000000000 x13: 0000000000000220 x12: 0000000000000000 [ 11.659286] x11: 0000000000000000 x10: ffff0000c1fdb2b0 x9 : ffffdb2232ba5590 [ 11.659934] x8 : 00000000e5b906e6 x7 : ffff0000c2502778 x6 : ffffdb22339793d0 [ 11.660581] x5 : ffff80008192bc18 x4 : ffff0000c19cbca0 x3 : 0000000000000000 [ 11.661228] x2 : ffff0000c1fdaf40 x1 : ffffffffffffffed x0 : ffff0000c1eef000 [ 11.661878] Call trace: [ 11.662103] __power_supply_is_supplied_by+0x18/0x100 (P) [ 11.662596] __power_supply_am_i_supplied+0x40/0xb8 [ 11.663040] psy_for_each_psy_cb+0x20/0x40 [ 11.663416] class_for_each_device+0x110/0x150 [ 11.663825] power_supply_am_i_supplied+0x68/0x100 [ 11.664262] bq257xx_external_power_changed+0x58/0x140 [ 11.664733] __power_supply_changed_work+0x60/0x80 [ 11.665170] psy_for_each_psy_cb+0x20/0x40 [ 11.665545] class_for_each_device+0x110/0x150 [ 11.665953] power_supply_changed_work+0x98/0x1b8 [ 11.666382] process_one_work+0x164/0x4c0 [ 11.666758] worker_thread+0x19c/0x320 [ 11.667104] kthread+0x138/0x150 [ 11.667408] ret_from_fork+0x10/0x20 [ 11.667744] Code: d503233f a9bd7bfd 910003fd a90153f3 (f9400c34) [ 11.668294] ---[ end trace 0000000000000000 ]--- Add a read-write semaphore between external_power_changed() and power_supply_unregister() to prevent the latter from returning (and thus the driver from freeing its data) while the callback is still running. | ||||