Export limit exceeded: 421969 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 36450 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36450 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43467 | 1 Linux | 1 Linux Kernel | 2026-05-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix crash when moving to switchdev mode When moving to switchdev mode when the device doesn't support IPsec, we try to clean up the IPsec resources anyway which causes the crash below, fix that by correctly checking for IPsec support before trying to clean up its resources. [27642.515799] WARNING: arch/x86/mm/fault.c:1276 at do_user_addr_fault+0x18a/0x680, CPU#4: devlink/6490 [27642.517159] Modules linked in: xt_conntrack xt_MASQUERADE ip6table_nat ip6table_filter ip6_tables iptable_nat nf_nat xt_addrtype rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_fwctl nfnetlink zram zsmalloc mlx5_ib fuse rpcrdma rdma_ucm ib_uverbs ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_core ib_core [27642.521358] CPU: 4 UID: 0 PID: 6490 Comm: devlink Not tainted 6.19.0-rc5_for_upstream_min_debug_2026_01_14_16_47 #1 NONE [27642.522923] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [27642.524528] RIP: 0010:do_user_addr_fault+0x18a/0x680 [27642.525362] Code: ff 0f 84 75 03 00 00 48 89 ee 4c 89 e7 e8 5e b9 22 00 49 89 c0 48 85 c0 0f 84 a8 02 00 00 f7 c3 60 80 00 00 74 22 31 c9 eb ae <0f> 0b 48 83 c4 10 48 89 ea 48 89 de 4c 89 f7 5b 5d 41 5c 41 5d 41 [27642.528166] RSP: 0018:ffff88810770f6b8 EFLAGS: 00010046 [27642.529038] RAX: 0000000000000000 RBX: 0000000000000002 RCX: ffff88810b980f00 [27642.530158] RDX: 00000000000000a0 RSI: 0000000000000002 RDI: ffff88810770f728 [27642.531270] RBP: 00000000000000a0 R08: 0000000000000000 R09: 0000000000000000 [27642.532383] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888103f3c4c0 [27642.533499] R13: 0000000000000000 R14: ffff88810770f728 R15: 0000000000000000 [27642.534614] FS: 00007f197c741740(0000) GS:ffff88856a94c000(0000) knlGS:0000000000000000 [27642.535915] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27642.536858] CR2: 00000000000000a0 CR3: 000000011334c003 CR4: 0000000000172eb0 [27642.537982] Call Trace: [27642.538466] <TASK> [27642.538907] exc_page_fault+0x76/0x140 [27642.539583] asm_exc_page_fault+0x22/0x30 [27642.540282] RIP: 0010:_raw_spin_lock_irqsave+0x10/0x30 [27642.541134] Code: 07 85 c0 75 11 ba ff 00 00 00 f0 0f b1 17 75 06 b8 01 00 00 00 c3 31 c0 c3 90 0f 1f 44 00 00 53 9c 5b fa 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 05 48 89 d8 5b c3 89 c6 e8 7e 02 00 00 48 89 d8 5b [27642.543936] RSP: 0018:ffff88810770f7d8 EFLAGS: 00010046 [27642.544803] RAX: 0000000000000000 RBX: 0000000000000202 RCX: ffff888113ad96d8 [27642.545916] RDX: 0000000000000001 RSI: ffff88810770f818 RDI: 00000000000000a0 [27642.547027] RBP: 0000000000000098 R08: 0000000000000400 R09: ffff88810b980f00 [27642.548140] R10: 0000000000000001 R11: ffff888101845a80 R12: 00000000000000a8 [27642.549263] R13: ffffffffa02a9060 R14: 00000000000000a0 R15: ffff8881130d8a40 [27642.550379] complete_all+0x20/0x90 [27642.551010] mlx5e_ipsec_disable_events+0xb6/0xf0 [mlx5_core] [27642.552022] mlx5e_nic_disable+0x12d/0x220 [mlx5_core] [27642.552929] mlx5e_detach_netdev+0x66/0xf0 [mlx5_core] [27642.553822] mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core] [27642.554821] mlx5e_vport_rep_load+0x419/0x590 [mlx5_core] [27642.555757] ? xa_load+0x53/0x90 [27642.556361] __esw_offloads_load_rep+0x54/0x70 [mlx5_core] [27642.557328] mlx5_esw_offloads_rep_load+0x45/0xd0 [mlx5_core] [27642.558320] esw_offloads_enable+0xb4b/0xc90 [mlx5_core] [27642.559247] mlx5_eswitch_enable_locked+0x34e/0x4f0 [mlx5_core] [27642.560257] ? mlx5_rescan_drivers_locked+0x222/0x2d0 [mlx5_core] [27642.561284] mlx5_devlink_eswitch_mode_set+0x5ac/0x9c0 [mlx5_core] [27642.562334] ? devlink_rate_set_ops_supported+0x21/0x3a0 [27642.563220] devlink_nl_eswitch_set_doit+0x67/0xe0 [27642.564026] genl_family_rcv_msg_doit+0xe0/0x130 [27642.564816] genl_rcv_msg+0x183/0x290 [27642.565466] ? __devlink_nl_pre_doit.isra.0+0x160/0x160 [27642.566329] ? d ---truncated--- | ||||
| CVE-2026-43470 | 1 Linux | 1 Linux Kernel | 2026-05-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfs: return EISDIR on nfs3_proc_create if d_alias is a dir If we found an alias through nfs3_do_create/nfs_add_or_obtain /d_splice_alias which happens to be a dir dentry, we don't return any error, and simply forget about this alias, but the original dentry we were adding and passed as parameter remains negative. This later causes an oops on nfs_atomic_open_v23/finish_open since we supply a negative dentry to do_dentry_open. This has been observed running lustre-racer, where dirs and files are created/removed concurrently with the same name and O_EXCL is not used to open files (frequent file redirection). While d_splice_alias typically returns a directory alias or NULL, we explicitly check d_is_dir() to ensure that we don't attempt to perform file operations (like finish_open) on a directory inode, which triggers the observed oops. | ||||
| CVE-2009-1537 | 1 Microsoft | 5 Directx, Windows 2000, Windows 2003 Server and 2 more | 2026-05-21 | 8.8 High |
| Unspecified vulnerability in the QuickTime Movie Parser Filter in quartz.dll in DirectShow in Microsoft DirectX 7.0 through 9.0c on Windows 2000 SP4, Windows XP SP2 and SP3, and Windows Server 2003 SP2 allows remote attackers to execute arbitrary code via a crafted QuickTime media file, as exploited in the wild in May 2009, aka "DirectX NULL Byte Overwrite Vulnerability." | ||||
| CVE-2023-4972 | 1 Yepas | 1 Digital Yepas | 2026-05-21 | 9.8 Critical |
| Incorrect Use of Privileged APIs vulnerability in Yepas Digital Yepas allows Collect Data as Provided by Users. This issue affects Digital Yepas: before 1.0.1. | ||||
| CVE-2025-71239 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: audit: add fchmodat2() to change attributes class fchmodat2(), introduced in version 6.6 is currently not in the change attribute class of audit. Calling fchmodat2() to change a file attribute in the same fashion than chmod() or fchmodat() will bypass audit rules such as: -w /tmp/test -p rwa -k test_rwa The current patch adds fchmodat2() to the change attributes class. | ||||
| CVE-2025-31973 | 1 Hcltech | 1 Bigfix Service Management | 2026-05-20 | 4 Medium |
| HCL BigFix Service Management (SM) is susceptible to a Configuration – 'Insecure Use of Base Image Version'. Using outdated or insecure base images may introduce known vulnerabilities, potentially increasing the risk of exploitation in the application environment. | ||||
| CVE-2025-31985 | 1 Hcltech | 1 Bigfix Service Management | 2026-05-20 | 3.7 Low |
| HCL BigFix Service Management (SM) is affected by a security misconfiguration due to a missing or insecure “X-Content-Type-Options” header. This could allow browsers to perform MIME-type sniffing, potentially causing malicious content to be interpreted and executed incorrectly. | ||||
| CVE-2026-43461 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: amlogic: spifc-a4: Fix DMA mapping error handling Fix three bugs in aml_sfc_dma_buffer_setup() error paths: 1. Unnecessary goto: When the first DMA mapping (sfc->daddr) fails, nothing needs cleanup. Use direct return instead of goto. 2. Double-unmap bug: When info DMA mapping failed, the code would unmap sfc->daddr inline, then fall through to out_map_data which would unmap it again, causing a double-unmap. 3. Wrong unmap size: The out_map_info label used datalen instead of infolen when unmapping sfc->iaddr, which could lead to incorrect DMA sync behavior. | ||||
| CVE-2026-43462 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: spacemit: Fix error handling in emac_tx_mem_map() The DMA mappings were leaked on mapping error. Free them with the existing emac_free_tx_buf() function. | ||||
| CVE-2026-43476 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iio: chemical: sps30_i2c: fix buffer size in sps30_i2c_read_meas() sizeof(num) evaluates to sizeof(size_t) (8 bytes on 64-bit) instead of the intended __be32 element size (4 bytes). Use sizeof(*meas) to correctly match the buffer element type. | ||||
| CVE-2026-43454 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix for duplicate device in netdev hooks When handling NETDEV_REGISTER notification, duplicate device registration must be avoided since the device may have been added by nft_netdev_hook_alloc() already when creating the hook. | ||||
| CVE-2026-43455 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mctp: route: hold key->lock in mctp_flow_prepare_output() mctp_flow_prepare_output() checks key->dev and may call mctp_dev_set_key(), but it does not hold key->lock while doing so. mctp_dev_set_key() and mctp_dev_release_key() are annotated with __must_hold(&key->lock), so key->dev access is intended to be serialized by key->lock. The mctp_sendmsg() transmit path reaches mctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output() without holding key->lock, so the check-and-set sequence is racy. Example interleaving: CPU0 CPU1 ---- ---- mctp_flow_prepare_output(key, devA) if (!key->dev) // sees NULL mctp_flow_prepare_output( key, devB) if (!key->dev) // still NULL mctp_dev_set_key(devB, key) mctp_dev_hold(devB) key->dev = devB mctp_dev_set_key(devA, key) mctp_dev_hold(devA) key->dev = devA // overwrites devB Now both devA and devB references were acquired, but only the final key->dev value is tracked for release. One reference can be lost, causing a resource leak as mctp_dev_release_key() would only decrease the reference on one dev. Fix by taking key->lock around the key->dev check and mctp_dev_set_key() call. | ||||
| CVE-2026-8766 | 2 Kilo, Kilo-org | 3 Kilo Code, Kilo Code Cli, Kilocode | 2026-05-20 | 4.3 Medium |
| A flaw has been found in Kilo-Org kilocode up to 7.0.47. This issue affects the function Load of the file packages/opencode/src/config/config.ts of the component Environment Variable Handler. Executing a manipulation of the argument KILO_CONFIG_CONTENT can lead to information disclosure. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-31406 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix work re-schedule after cancel in xfrm_nat_keepalive_net_fini() After cancel_delayed_work_sync() is called from xfrm_nat_keepalive_net_fini(), xfrm_state_fini() flushes remaining states via __xfrm_state_delete(), which calls xfrm_nat_keepalive_state_updated() to re-schedule nat_keepalive_work. The following is a simple race scenario: cpu0 cpu1 cleanup_net() [Round 1] ops_undo_list() xfrm_net_exit() xfrm_nat_keepalive_net_fini() cancel_delayed_work_sync(nat_keepalive_work); xfrm_state_fini() xfrm_state_flush() xfrm_state_delete(x) __xfrm_state_delete(x) xfrm_nat_keepalive_state_updated(x) schedule_delayed_work(nat_keepalive_work); rcu_barrier(); net_complete_free(); net_passive_dec(net); llist_add(&net->defer_free_list, &defer_free_list); cleanup_net() [Round 2] rcu_barrier(); net_complete_free() kmem_cache_free(net_cachep, net); nat_keepalive_work() // on freed net To prevent this, cancel_delayed_work_sync() is replaced with disable_delayed_work_sync(). | ||||
| CVE-2026-43481 | 1 Linux | 1 Linux Kernel | 2026-05-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net-shapers: don't free reply skb after genlmsg_reply() genlmsg_reply() hands the reply skb to netlink, and netlink_unicast() consumes it on all return paths, whether the skb is queued successfully or freed on an error path. net_shaper_nl_get_doit() and net_shaper_nl_cap_get_doit() currently jump to free_msg after genlmsg_reply() fails and call nlmsg_free(msg), which can hit the same skb twice. Return the genlmsg_reply() error directly and keep free_msg only for pre-reply failures. | ||||
| CVE-2023-4993 | 1 Utarit | 2 Solipay Mobile, Solipay Mobile App | 2026-05-20 | 7.5 High |
| Incorrect Use of Privileged APIs vulnerability in Utarit Information Technologies SoliPay Mobile App allows Collect Data as Provided by Users. This issue affects SoliPay Mobile App: before 5.0.8. | ||||
| CVE-2023-26314 | 2 Debian, Mono-project | 2 Debian Linux, Mono | 2026-05-20 | 8.8 High |
| The mono package before 6.8.0.105+dfsg-3.3 for Debian allows arbitrary code execution because the application/x-ms-dos-executable MIME type is associated with an un-sandboxed Mono CLR interpreter. | ||||
| CVE-2026-4342 | 1 Kubernetes | 2 Ingress-nginx, Nginx Ingress Controller | 2026-05-19 | 8.8 High |
| A security issue was discovered in ingress-nginx where a combination of Ingress annotations can be used to inject configuration into nginx. This can lead to arbitrary code execution in the context of the ingress-nginx controller, and disclosure of Secrets accessible to the controller. (Note that in the default installation, the controller can access all Secrets cluster-wide.) | ||||
| CVE-2026-31439 | 1 Linux | 1 Linux Kernel | 2026-05-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx: xdma: Fix regmap init error handling devm_regmap_init_mmio returns an ERR_PTR() upon error, not NULL. Fix the error check and also fix the error message. Use the error code from ERR_PTR() instead of the wrong value in ret. | ||||
| CVE-2026-43092 | 1 Linux | 1 Linux Kernel | 2026-05-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: validate MTU against usable frame size on bind AF_XDP bind currently accepts zero-copy pool configurations without verifying that the device MTU fits into the usable frame space provided by the UMEM chunk. This becomes a problem since we started to respect tailroom which is subtracted from chunk_size (among with headroom). 2k chunk size might not provide enough space for standard 1500 MTU, so let us catch such settings at bind time. Furthermore, validate whether underlying HW will be able to satisfy configured MTU wrt XSK's frame size multiplied by supported Rx buffer chain length (that is exposed via net_device::xdp_zc_max_segs). | ||||