Export limit exceeded: 422028 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 11065 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 94786 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (94786 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74560 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: fix buffer leak in xsk_drop_skb() for AF_XDP multi-buffer Tx This patch is inspired by the check[1] from sashiko. It says when overflow happens, the address of cq to be published is invalid. Actually the severer thing is the whole process of publishing the address of cq in this particular case is not right: it should truely publish the address and advance the cached_prod in cq as long as it reads descriptors from txq. The following is the full analysis. xsk_drop_skb() is called in three places, which all discard a partially built multi-buffer skb: 1) xsk_build_skb() -EOVERFLOW error path: packet exceeds MAX_SKB_FRAGS 2) __xsk_generic_xmit() post-loop cleanup: an invalid descriptor in the TX ring prevents the partial packet from completing 3) xsk_release(): socket close while xs->skb holds an incomplete packet In all three cases, the TX descriptors for the already-processed frags have been consumed from the TX ring (xskq_cons_release), and CQ slots have been reserved. However, xsk_drop_skb() calls xsk_consume_skb() which cancels the CQ reservations via xsk_cq_cancel_locked(). Since the buffer addresses never appear in the completion queue, userspace permanently loses track of these buffers. Fix this by letting consume_skb() trigger the existing xsk_destruct_skb destructor, which already submits buffer addresses to the CQ via xsk_cq_submit_addr_locked(). Note that cancelling the descriptors back to the TX ring (via xskq_cons_cancel_n) is not a appropriate option because an oversized packet that always exceeds MAX_SKB_FRAGS would be retried indefinitely, which is an obviously deadlock bug in the TX path. Also move the desc->addr assignment in xsk_build_skb() above the overflow check so that the current descriptor's address is recorded before a potential -EOVERFLOW jump to free_err, consistent with the zerocopy path in xsk_build_skb_zerocopy(). [1]: https://lore.kernel.org/all/20260425041726.85FB3C2BCB2@smtp.kernel.org/ | ||||
| CVE-2026-74559 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: drain continuation descs after overflow in xsk_build_skb() Fix generic xmit path multi-buffer logic when packets are either too big (count of descriptors exceed MAX_SKB_FRAGS) or an invalid descriptor is included in fragmented packet. Introduce xdp_sock::drain_cont and act upon this flag - when it is set, keep on consuming descriptors from AF_XDP Tx ring and put them directly onto Cq. Previously these descriptors were silently lost and could never be reached again. | ||||
| CVE-2026-74558 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: reclaim invalid Tx descriptors in ZC batch path The zero-copy Tx batch parser stops when it encounters an invalid descriptor. If this happens after one or more continuation descriptors, the Tx consumer can be advanced past fragments that are neither submitted to the driver nor returned to userspace through the completion ring. A similar problem occurs when a packet exceeds xdp_zc_max_segs. The descriptors consumed up to the limit are released without completion, and the remaining continuation descriptors can subsequently be interpreted as the beginning of another packet. Parse Tx batches in packet units and distinguish descriptors belonging to complete valid packets from descriptors consumed while draining an invalid or oversized packet. Return the former to the driver and append the latter to the CQ address area so userspace can reclaim their UMEM frames. Treat a standalone invalid descriptor as a one-descriptor reclaim-only packet. Advancing the Tx-ring consumer releases the ring slot, but does not by itself return ownership of the referenced UMEM frame to userspace. Once draining starts, continue until the packet's end-of-packet descriptor is consumed. Preserve the drain state on the socket when EOP has not yet been supplied, so draining can continue during a later call. Leave incomplete but otherwise valid packets on the Tx ring. Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing. Walk their Tx sockets one packet at a time, preserving the existing per-socket fairness scheme, instead of using the legacy one-descriptor fallback. Keep that fallback for shared pools that do not use multi-buffer Tx. Since the drain state is maintained per socket and both the singular and shared paths can resume an interrupted drain, changing the socket list from singular to shared requires no special bind-time transition. CQ entries are positional, and drivers may complete only part of the Tx work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only entries cannot be published immediately when earlier driver-visible descriptors are still outstanding. Track the number of driver-visible CQ entries preceding the reclaim entries. Let xsk_tx_completed() publish partial hardware Tx completions, and publish the reclaim entries only after every earlier Tx descriptor has completed. Complete a reclaim-only batch immediately when there is no driver-visible work in front of it, and prevent another Tx batch from being appended while reclaim entries remain pending. Also cap batch processing by the size of the pool's temporary descriptor array, as Tx rings belonging to sockets sharing a UMEM may have different sizes. This ensures that every invalid Tx descriptor consumed by the ZC batch path is either submitted to the driver as part of a valid packet or returned to userspace without violating CQ completion ordering. | ||||
| CVE-2026-74542 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio_queue ENOMEM in writeback by adding a mempool Fix the handling of folio_queue allocation failure in writeback by adding a mempool and passing in gfp_t flags to the rolling buffer functions that allocate memory, using the mempool if gfp != GFP_KERNEL. This is then extended upwards and the gfp to be used for a request is stored in the netfs_io_request struct and is then used for both requests and subrequests, eliminating the sleeping loops there. The failure caused: folio != NULL WARNING: fs/netfs/write_issue.c:603 at netfs_writepages+0x883/0xa10 fs/netfs/write_issue.c:603, CPU#3: syz.0.17/5919 | ||||
| CVE-2026-74385 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: check return value of nvmet_tcp_set_queue_sock The return value of nvmet_tcp_set_queue_sock() is currently ignored in nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket not being in TCP_ESTABLISHED state), the socket callbacks will not be properly set, leading to queue and socket leakage. Fix this by capturing the return value and calling nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup. | ||||
| CVE-2026-74373 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix bio accounting for split md cloned bios Use md_cloned_bio() to control bio accounting instead of relying on r1bio_existed in raid1 or the io_accounting flag in raid10. The previous logic does not reliably reflect whether a bio is an md cloned bio. When a failed bio is split and resubmitted via bio_submit_split_bioset() on the error path, this can lead to either double accounting for md cloned bios, or missing accounting for bios returned from bio_submit_split_bioset() Fix this by using md_cloned_bio() to detect md cloned bios and skip accounting accordingly. | ||||
| CVE-2026-74368 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix memory leak in ath12k_wifi7_dp_rx_h_verify_tkip_mic() In ath12k_wifi7_dp_rx_h_verify_tkip_mic(), the call to ath12k_dp_rx_check_nwifi_hdr_len_valid() may return false when the NWIFI header length is invalid, causing the function to abort early with -EINVAL. When this happens, the error propagates to ath12k_wifi7_dp_rx_h_defrag(), which clears first_frag by setting it to NULL. As a result, the corresponding MSDU is no longer referenced by the defragmentation path and is never freed. This leads to a memory leak for the affected MSDU on this error path. Proper cleanup is required to ensure the MSDU is released when header validation fails during TKIP MIC verification. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-72493 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.9 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: serialize netif_running() check in enqueue_to_backlog() Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup(). The root cause is a race condition where packets can escape the backlog flushing during device unregistration (e.g., during netns exit). Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration") introduced a lockless netif_running() check in enqueue_to_backlog() to prevent queuing packets to an unregistering device. However, this creates a TOCTOU race window. A lockless transmitter (like veth_xmit) can pass the check before dev_close() clears IFF_UP. If the transmitter is then delayed, flush_all_backlogs() can run and finish before the transmitter grabs the backlog lock and queues the packet. The packet then escapes the flush and triggers UAF later when processed. Fix this by moving the netif_running() check inside the backlog lock. This serializes the check with the flush work (which also grabs the lock). We then either queue the packet before the flush runs (so it gets flushed), or check netif_running() after the flush/close completes (so it gets dropped). | ||||
| CVE-2026-72352 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: bpf: Fix hid_bpf_get_data() range check hid_bpf_get_data() returns a pointer into the HID-BPF context data when the caller-provided offset and size fit inside ctx->allocated_size. The current check adds rdwr_buf_size and offset before comparing the result against ctx->allocated_size. Since both values are unsigned, a very large size can wrap the sum below ctx->allocated_size and make the helper return a pointer even though the requested range is not contained in the backing buffer. Use check_add_overflow() to reject wrapped range ends before comparing the requested range end against ctx->allocated_size. | ||||
| CVE-2026-72324 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mvebu: free generic chips on unbind irq_alloc_domain_generic_chips() allocates generic chip data that must be freed via irq_domain_remove_generic_chips(). The devres action mvebu_gpio_remove_irq_domain() only called irq_domain_remove(), which only frees the generic chips if IRQ_DOMAIN_FLAG_DESTROY_GC is set. Call irq_domain_remove_generic_chips() explicitly before irq_domain_remove() instead. | ||||
| CVE-2026-68436 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: use kvzalloc to allocate struct dc struct dc has grown large over time (most of it the two inlined dc_scratch_space copies) and now sits close to the page allocator's 4 MiB contiguous allocation limit. Its actual size is not fixed by the source alone, it also depends on the compiler and the .config, so it can easily cross 4 MiB, e.g. with a newer GCC or a config change. dc_create() allocates it with kzalloc(). Once struct dc exceeds 4 MiB the request is rounded up to order 11 (8 MiB), which is above MAX_PAGE_ORDER, so the page allocator warns and returns NULL. dc_create() then fails, DM init fails and amdgpu probe aborts with -EINVAL: WARNING: mm/page_alloc.c:5197 at __alloc_frozen_pages_noprof+0x2f9/0x380 dc_create+0x38/0x660 [amdgpu] amdgpu_dm_init+0x2d9/0x510 [amdgpu] dm_hw_init+0x1b/0x90 [amdgpu] amdgpu_device_init.cold+0x150d/0x1e13 [amdgpu] amdgpu_driver_load_kms+0x19/0x80 [amdgpu] amdgpu_pci_probe+0x1e2/0x4c0 [amdgpu] dc_create() then returns NULL and DM init fails, which aborts the whole GPU init and makes amdgpu probe fail with -EINVAL ("hw_init of IP block <dm> failed -22"), leaving the display unusable. The subsequent amdgpu_irq_put() warnings during teardown are just fallout of unwinding a half-initialized device. struct dc is a software-only bookkeeping structure that is never handed to hardware DMA and is only ever kept as an opaque pointer, so it does not require physically contiguous memory. Allocate it with kvzalloc() (and free it with kvfree()) so that the allocator can fall back to vmalloc() when a contiguous allocation of that size is not available, which also avoids the MAX_PAGE_ORDER warning entirely. v2: - Rebase to amd-staging-drm-next. (cherry picked from commit 991e0516a8072f2292681c6ae98a924ab0e32575) | ||||
| CVE-2026-68412 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan() If the test against IEEE80211_MAX_SSID_LEN fails, then 'creq' leaks. Use the existing error handling path to fix it. | ||||
| CVE-2026-68211 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: stm32-dcmipp: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. dcmipp_bytecap_start_streaming() returned -EINVAL when the source subdevice could not be resolved from the media graph, before pm_runtime_resume_and_get() and media_pipeline_start() had been called. The remaining error paths already converge on the err_buffer_done label, which calls dcmipp_bytecap_all_buffers_done(..., VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate err_pm_put / err_media_pipeline_stop labels are skipped, which is correct because nothing they would undo has happened yet. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-64377 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom-cpufreq-hw: Fix possible double free qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to one element of this array in policy->driver_data. qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data. This is not valid because the memory is devm-managed. For the first domain, this can free the devm-managed allocation while the devres entry is still active, leading to a possible double free when the platform device is later detached. For other domains, the pointer may refer to an element inside the array rather than the allocation base. Remove the kfree(data) call and let devres release qcom_cpufreq.data. This issue was found by a static analysis tool I am developing. | ||||
| CVE-2026-64241 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: rockchip: teardown bugs and resource leaks Address several teardown issues and resource leaks in the driver's remove path and error handling: 1. Debounce clock reference leak: The debounce clock (bank->db_clk) is obtained using of_clk_get() which increments the clock's reference count, but clk_put() is never called. Register a devm action to cleanly release it on unbind. Note that of_clk_get(..., 1) remains necessary over devm_clk_get() because the DT binding does not define clock-names, precluding name-based lookup. 2. Unregistered chained IRQ handler: The chained IRQ handler is not disconnected in remove(). If a stray interrupt fires after the driver is removed, the kernel attempts to execute a stale handler, leading to a panic. Fix this by clearing the handler in remove(). 3. IRQ domain leak: The linear IRQ domain and its generic chips are allocated manually during probe but never removed. Remove the IRQ domain during driver teardown to free the associated generic chips and mappings. [Bartosz: don't emit an error message on devres allocation failure] | ||||
| CVE-2026-63999 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: rss: fix indir_table and hkey leak on get_rxfh failure rss_prepare_get() allocates the indirection table and hash key buffer via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them. If get_rxfh() fails, the function returns an error without freeing the allocation. | ||||
| CVE-2026-46228 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: ch341: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the controller and driver data lifetime so that they are released on driver unbind. Note that this also makes sure that the SPI controller is placed correctly under the USB interface in the device tree. | ||||
| CVE-2026-46171 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: kvm: fix vector context allocation leak When the second kzalloc (host_context.vector.datap) fails in kvm_riscv_vcpu_alloc_vector_context, the first allocation (guest_context.vector.datap) is leaked. Free it before returning. | ||||
| CVE-2026-46044 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi:ssif: Clean up kthread on errors If an error occurs after the ssif kthread is created, but before the main IPMI code starts the ssif interface, the ssif kthread will not be stopped. So make sure the kthread is stopped on an error condition if it is running. | ||||
| CVE-2026-43485 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/gsp: drop WARN_ON in ACPI probes These WARN_ONs seem to trigger a lot, and we don't seem to have a plan to fix them, so just drop them, as they are most likely harmless. | ||||