Export limit exceeded: 36450 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36450 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23383 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing struct bpf_plt contains a u64 target field. Currently, the BPF JIT allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT buffer. Because the base address of the JIT buffer can be 4-byte aligned (e.g., ending in 0x4 or 0xc), the relative padding logic in build_plt() fails to ensure that target lands on an 8-byte boundary. This leads to two issues: 1. UBSAN reports misaligned-access warnings when dereferencing the structure. 2. More critically, target is updated concurrently via WRITE_ONCE() in bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64, 64-bit loads/stores are only guaranteed to be single-copy atomic if they are 64-bit aligned. A misaligned target risks a torn read, causing the JIT to jump to a corrupted address. Fix this by increasing the allocation alignment requirement to 8 bytes (sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of the JIT buffer to an 8-byte boundary, allowing the relative padding math in build_plt() to correctly align the target field. | ||||
| CVE-2026-23377 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz The only user of frag_size field in XDP RxQ info is bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead of DMA write size. Different assumptions in ice driver configuration lead to negative tailroom. This allows to trigger kernel panic, when using XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to 6912 and the requested offset to a huge value, e.g. XSK_UMEM__MAX_FRAME_SIZE * 100. Due to other quirks of the ZC configuration in ice, panic is not observed in ZC mode, but tailroom growing still fails when it should not. Use fill queue buffer truesize instead of DMA write size in XDP RxQ info. Fix ZC mode too by using the new helper. | ||||
| CVE-2026-23374 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blktrace: fix __this_cpu_read/write in preemptible context tracing_record_cmdline() internally uses __this_cpu_read() and __this_cpu_write() on the per-CPU variable trace_cmdline_save, and trace_save_cmdline() explicitly asserts preemption is disabled via lockdep_assert_preemption_disabled(). These operations are only safe when preemption is off, as they were designed to be called from the scheduler context (probe_wakeup_sched_switch() / probe_wakeup()). __blk_add_trace() was calling tracing_record_cmdline(current) early in the blk_tracer path, before ring buffer reservation, from process context where preemption is fully enabled. This triggers the following using blktests/blktrace/002: blktrace/002 (blktrace ftrace corruption with sysfs trace) [failed] runtime 0.367s ... 0.437s something found in dmesg: [ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33 [ 81.239580] null_blk: disk nullb1 created [ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516 [ 81.362842] caller is tracing_record_cmdline+0x10/0x40 [ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full) [ 81.362877] Tainted: [N]=TEST [ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 81.362881] Call Trace: [ 81.362884] <TASK> [ 81.362886] dump_stack_lvl+0x8d/0xb0 ... (See '/mnt/sda/blktests/results/nodev/blktrace/002.dmesg' for the entire message) [ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33 [ 81.239580] null_blk: disk nullb1 created [ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516 [ 81.362842] caller is tracing_record_cmdline+0x10/0x40 [ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full) [ 81.362877] Tainted: [N]=TEST [ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 81.362881] Call Trace: [ 81.362884] <TASK> [ 81.362886] dump_stack_lvl+0x8d/0xb0 [ 81.362895] check_preemption_disabled+0xce/0xe0 [ 81.362902] tracing_record_cmdline+0x10/0x40 [ 81.362923] __blk_add_trace+0x307/0x5d0 [ 81.362934] ? lock_acquire+0xe0/0x300 [ 81.362940] ? iov_iter_extract_pages+0x101/0xa30 [ 81.362959] blk_add_trace_bio+0x106/0x1e0 [ 81.362968] submit_bio_noacct_nocheck+0x24b/0x3a0 [ 81.362979] ? lockdep_init_map_type+0x58/0x260 [ 81.362988] submit_bio_wait+0x56/0x90 [ 81.363009] __blkdev_direct_IO_simple+0x16c/0x250 [ 81.363026] ? __pfx_submit_bio_wait_endio+0x10/0x10 [ 81.363038] ? rcu_read_lock_any_held+0x73/0xa0 [ 81.363051] blkdev_read_iter+0xc1/0x140 [ 81.363059] vfs_read+0x20b/0x330 [ 81.363083] ksys_read+0x67/0xe0 [ 81.363090] do_syscall_64+0xbf/0xf00 [ 81.363102] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 81.363106] RIP: 0033:0x7f281906029d [ 81.363111] Code: 31 c0 e9 c6 fe ff ff 50 48 8d 3d 66 63 0a 00 e8 59 ff 01 00 66 0f 1f 84 00 00 00 00 00 80 3d 41 33 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec [ 81.363113] RSP: 002b:00007ffca127dd48 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 81.363120] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281906029d [ 81.363122] RDX: 0000000000001000 RSI: 0000559f8bfae000 RDI: 0000000000000000 [ 81.363123] RBP: 0000000000001000 R08: 0000002863a10a81 R09: 00007f281915f000 [ 81.363124] R10: 00007f2818f77b60 R11: 0000000000000246 R12: 0000559f8bfae000 [ 81.363126] R13: 0000000000000000 R14: 0000000000000000 R15: 000000000000000a [ 81.363142] </TASK> The same BUG fires from blk_add_trace_plug(), blk_add_trace_unplug(), and blk_add_trace_rq() paths as well. The purpose of tracin ---truncated--- | ||||
| CVE-2026-23371 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting Running stress-ng --schedpolicy 0 on an RT kernel on a big machine might lead to the following WARNINGs (edited). sched: DL de-boosted task PID 22725: REPLENISH flag missing WARNING: CPU: 93 PID: 0 at kernel/sched/deadline.c:239 dequeue_task_dl+0x15c/0x1f8 ... (running_bw underflow) Call trace: dequeue_task_dl+0x15c/0x1f8 (P) dequeue_task+0x80/0x168 deactivate_task+0x24/0x50 push_dl_task+0x264/0x2e0 dl_task_timer+0x1b0/0x228 __hrtimer_run_queues+0x188/0x378 hrtimer_interrupt+0xfc/0x260 ... The problem is that when a SCHED_DEADLINE task (lock holder) is changed to a lower priority class via sched_setscheduler(), it may fail to properly inherit the parameters of potential DEADLINE donors if it didn't already inherit them in the past (shorter deadline than donor's at that time). This might lead to bandwidth accounting corruption, as enqueue_task_dl() won't recognize the lock holder as boosted. The scenario occurs when: 1. A DEADLINE task (donor) blocks on a PI mutex held by another DEADLINE task (holder), but the holder doesn't inherit parameters (e.g., it already has a shorter deadline) 2. sched_setscheduler() changes the holder from DEADLINE to a lower class while still holding the mutex 3. The holder should now inherit DEADLINE parameters from the donor and be enqueued with ENQUEUE_REPLENISH, but this doesn't happen Fix the issue by introducing __setscheduler_dl_pi(), which detects when a DEADLINE (proper or boosted) task gets setscheduled to a lower priority class. In case, the function makes the task inherit DEADLINE parameters of the donoer (pi_se) and sets ENQUEUE_REPLENISH flag to ensure proper bandwidth accounting during the next enqueue operation. | ||||
| CVE-2026-23278 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: always walk all pending catchall elements During transaction processing we might have more than one catchall element: 1 live catchall element and 1 pending element that is coming as part of the new batch. If the map holding the catchall elements is also going away, its required to toggle all catchall elements and not just the first viable candidate. Otherwise, we get: WARNING: ./include/net/netfilter/nf_tables.h:1281 at nft_data_release+0xb7/0xe0 [nf_tables], CPU#2: nft/1404 RIP: 0010:nft_data_release+0xb7/0xe0 [nf_tables] [..] __nft_set_elem_destroy+0x106/0x380 [nf_tables] nf_tables_abort_release+0x348/0x8d0 [nf_tables] nf_tables_abort+0xcf2/0x3ac0 [nf_tables] nfnetlink_rcv_batch+0x9c9/0x20e0 [..] | ||||
| CVE-2026-23272 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: unconditionally bump set->nelems before insertion In case that the set is full, a new element gets published then removed without waiting for the RCU grace period, while RCU reader can be walking over it already. To address this issue, add the element transaction even if set is full, but toggle the set_full flag to report -ENFILE so the abort path safely unwinds the set to its previous state. As for element updates, decrement set->nelems to restore it. A simpler fix is to call synchronize_rcu() in the error path. However, with a large batch adding elements to already maxed-out set, this could cause noticeable slowdown of such batches. | ||||
| CVE-2026-23247 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: secure_seq: add back ports to TS offset This reverts 28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets") tcp_tw_recycle went away in 2017. Zhouyan Deng reported off-path TCP source port leakage via SYN cookie side-channel that can be fixed in multiple ways. One of them is to bring back TCP ports in TS offset randomization. As a bonus, we perform a single siphash() computation to provide both an ISN and a TS offset. | ||||
| CVE-2026-23214 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: reject new transactions if the fs is fully read-only [BUG] There is a bug report where a heavily fuzzed fs is mounted with all rescue mount options, which leads to the following warnings during unmount: BTRFS: Transaction aborted (error -22) Modules linked in: CPU: 0 UID: 0 PID: 9758 Comm: repro.out Not tainted 6.19.0-rc5-00002-gb71e635feefc #7 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:find_free_extent_update_loop fs/btrfs/extent-tree.c:4208 [inline] RIP: 0010:find_free_extent+0x52f0/0x5d20 fs/btrfs/extent-tree.c:4611 Call Trace: <TASK> btrfs_reserve_extent+0x2cd/0x790 fs/btrfs/extent-tree.c:4705 btrfs_alloc_tree_block+0x1e1/0x10e0 fs/btrfs/extent-tree.c:5157 btrfs_force_cow_block+0x578/0x2410 fs/btrfs/ctree.c:517 btrfs_cow_block+0x3c4/0xa80 fs/btrfs/ctree.c:708 btrfs_search_slot+0xcad/0x2b50 fs/btrfs/ctree.c:2130 btrfs_truncate_inode_items+0x45d/0x2350 fs/btrfs/inode-item.c:499 btrfs_evict_inode+0x923/0xe70 fs/btrfs/inode.c:5628 evict+0x5f4/0xae0 fs/inode.c:837 __dentry_kill+0x209/0x660 fs/dcache.c:670 finish_dput+0xc9/0x480 fs/dcache.c:879 shrink_dcache_for_umount+0xa0/0x170 fs/dcache.c:1661 generic_shutdown_super+0x67/0x2c0 fs/super.c:621 kill_anon_super+0x3b/0x70 fs/super.c:1289 btrfs_kill_super+0x41/0x50 fs/btrfs/super.c:2127 deactivate_locked_super+0xbc/0x130 fs/super.c:474 cleanup_mnt+0x425/0x4c0 fs/namespace.c:1318 task_work_run+0x1d4/0x260 kernel/task_work.c:233 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x694/0x22f0 kernel/exit.c:971 do_group_exit+0x21c/0x2d0 kernel/exit.c:1112 __do_sys_exit_group kernel/exit.c:1123 [inline] __se_sys_exit_group kernel/exit.c:1121 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1121 x64_sys_call+0x2210/0x2210 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe8/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x44f639 Code: Unable to access opcode bytes at 0x44f60f. RSP: 002b:00007ffc15c4e088 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00000000004c32f0 RCX: 000000000044f639 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffffffffffc0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004c32f0 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 </TASK> Since rescue mount options will mark the full fs read-only, there should be no new transaction triggered. But during unmount we will evict all inodes, which can trigger a new transaction, and triggers warnings on a heavily corrupted fs. [CAUSE] Btrfs allows new transaction even on a read-only fs, this is to allow log replay happen even on read-only mounts, just like what ext4/xfs do. However with rescue mount options, the fs is fully read-only and cannot be remounted read-write, thus in that case we should also reject any new transactions. [FIX] If we find the fs has rescue mount options, we should treat the fs as error, so that no new transaction can be started. | ||||
| CVE-2026-23213 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Disable MMIO access during SMU Mode 1 reset During Mode 1 reset, the ASIC undergoes a reset cycle and becomes temporarily inaccessible via PCIe. Any attempt to access MMIO registers during this window (e.g., from interrupt handlers or other driver threads) can result in uncompleted PCIe transactions, leading to NMI panics or system hangs. To prevent this, set the `no_hw_access` flag to true immediately after triggering the reset. This signals other driver components to skip register accesses while the device is offline. A memory barrier `smp_mb()` is added to ensure the flag update is globally visible to all cores before the driver enters the sleep/wait state. (cherry picked from commit 7edb503fe4b6d67f47d8bb0dfafb8e699bb0f8a4) | ||||
| CVE-2026-23138 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Add recursion protection in kernel stack trace recording A bug was reported about an infinite recursion caused by tracing the rcu events with the kernel stack trace trigger enabled. The stack trace code called back into RCU which then called the stack trace again. Expand the ftrace recursion protection to add a set of bits to protect events from recursion. Each bit represents the context that the event is in (normal, softirq, interrupt and NMI). Have the stack trace code use the interrupt context to protect against recursion. Note, the bug showed an issue in both the RCU code as well as the tracing stacktrace code. This only handles the tracing stack trace side of the bug. The RCU fix will be handled separately. | ||||
| CVE-2025-71289 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: handle attr_set_size() errors when truncating files If attr_set_size() fails while truncating down, the error is silently ignored and the inode may be left in an inconsistent state. | ||||
| CVE-2025-71227 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't WARN for connections on invalid channels It's not clear (to me) how exactly syzbot managed to hit this, but it seems conceivable that e.g. regulatory changed and has disabled a channel between scanning (channel is checked to be usable by cfg80211_get_ies_channel_number) and connecting on the channel later. With one scenario that isn't covered elsewhere described above, the warning isn't good, replace it with a (more informative) error message. | ||||
| CVE-2025-71152 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: properly keep track of conduit reference Problem description ------------------- DSA has a mumbo-jumbo of reference handling of the conduit net device and its kobject which, sadly, is just wrong and doesn't make sense. There are two distinct problems. 1. The OF path, which uses of_find_net_device_by_node(), never releases the elevated refcount on the conduit's kobject. Nominally, the OF and non-OF paths should result in objects having identical reference counts taken, and it is already suspicious that dsa_dev_to_net_device() has a put_device() call which is missing in dsa_port_parse_of(), but we can actually even verify that an issue exists. With CONFIG_DEBUG_KOBJECT_RELEASE=y, if we run this command "before" and "after" applying this patch: (unbind the conduit driver for net device eno2) echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind we see these lines in the output diff which appear only with the patch applied: kobject: 'eno2' (ffff002009a3a6b8): kobject_release, parent 0000000000000000 (delayed 1000) kobject: '109' (ffff0020099d59a0): kobject_release, parent 0000000000000000 (delayed 1000) 2. After we find the conduit interface one way (OF) or another (non-OF), it can get unregistered at any time, and DSA remains with a long-lived, but in this case stale, cpu_dp->conduit pointer. Holding the net device's underlying kobject isn't actually of much help, it just prevents it from being freed (but we never need that kobject directly). What helps us to prevent the net device from being unregistered is the parallel netdev reference mechanism (dev_hold() and dev_put()). Actually we actually use that netdev tracker mechanism implicitly on user ports since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), via netdev_upper_dev_link(). But time still passes at DSA switch probe time between the initial of_find_net_device_by_node() code and the user port creation time, time during which the conduit could unregister itself and DSA wouldn't know about it. So we have to run of_find_net_device_by_node() under rtnl_lock() to prevent that from happening, and release the lock only with the netdev tracker having acquired the reference. Do we need to keep the reference until dsa_unregister_switch() / dsa_switch_shutdown()? 1: Maybe yes. A switch device will still be registered even if all user ports failed to probe, see commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal"), and the cpu_dp->conduit pointers remain valid. I haven't audited all call paths to see whether they will actually use the conduit in lack of any user port, but if they do, it seems safer to not rely on user ports for that reference. 2. Definitely yes. We support changing the conduit which a user port is associated to, and we can get into a situation where we've moved all user ports away from a conduit, thus no longer hold any reference to it via the net device tracker. But we shouldn't let it go nonetheless - see the next change in relation to dsa_tree_find_first_conduit() and LAG conduits which disappear. We have to be prepared to return to the physical conduit, so the CPU port must explicitly keep another reference to it. This is also to say: the user ports and their CPU ports may not always keep a reference to the same conduit net device, and both are needed. As for the conduit's kobject for the /sys/class/net/ entry, we don't care about it, we can release it as soon as we hold the net device object itself. History and blame attribution ----------------------------- The code has been refactored so many times, it is very difficult to follow and properly attribute a blame, but I'll try to make a short history which I hope to be correct. We have two distinct probing paths: - one for OF, introduced in 2016 i ---truncated--- | ||||
| CVE-2025-71089 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu: disable SVA when CONFIG_X86 is set Patch series "Fix stale IOTLB entries for kernel address space", v7. This proposes a fix for a security vulnerability related to IOMMU Shared Virtual Addressing (SVA). In an SVA context, an IOMMU can cache kernel page table entries. When a kernel page table page is freed and reallocated for another purpose, the IOMMU might still hold stale, incorrect entries. This can be exploited to cause a use-after-free or write-after-free condition, potentially leading to privilege escalation or data corruption. This solution introduces a deferred freeing mechanism for kernel page table pages, which provides a safe window to notify the IOMMU to invalidate its caches before the page is reused. This patch (of 8): In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardware shares and walks the CPU's page tables. The x86 architecture maps the kernel's virtual address space into the upper portion of every process's page table. Consequently, in an SVA context, the IOMMU hardware can walk and cache kernel page table entries. The Linux kernel currently lacks a notification mechanism for kernel page table changes, specifically when page table pages are freed and reused. The IOMMU driver is only notified of changes to user virtual address mappings. This can cause the IOMMU's internal caches to retain stale entries for kernel VA. Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise when kernel page table pages are freed and later reallocated. The IOMMU could misinterpret the new data as valid page table entries. The IOMMU might then walk into attacker-controlled memory, leading to arbitrary physical memory DMA access or privilege escalation. This is also a Write-After-Free issue, as the IOMMU will potentially continue to write Accessed and Dirty bits to the freed memory while attempting to walk the stale page tables. Currently, SVA contexts are unprivileged and cannot access kernel mappings. However, the IOMMU will still walk kernel-only page tables all the way down to the leaf entries, where it realizes the mapping is for the kernel and errors out. This means the IOMMU still caches these intermediate page table entries, making the described vulnerability a real concern. Disable SVA on x86 architecture until the IOMMU can receive notification to flush the paging cache before freeing the CPU kernel page table pages. | ||||
| CVE-2025-71068 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: bound check rq_pages index in inline path svc_rdma_copy_inline_range indexed rqstp->rq_pages[rc_curpage] without verifying rc_curpage stays within the allocated page array. Add guards before the first use and after advancing to a new page. | ||||
| CVE-2025-40325 | 1 Linux | 2 Kernel, Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: wait barrier before returning discard request with REQ_NOWAIT raid10_handle_discard should wait barrier before returning a discard bio which has REQ_NOWAIT. And there is no need to print warning calltrace if a discard bio has REQ_NOWAIT flag. Quality engineer usually checks dmesg and reports error if dmesg has warning/error calltrace. | ||||
| CVE-2025-39933 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: let recv_done verify data_offset, data_length and remaining_data_length This is inspired by the related server fixes. | ||||
| CVE-2025-39932 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: let smbd_destroy() call disable_work_sync(&info->post_send_credits_work) In smbd_destroy() we may destroy the memory so we better wait until post_send_credits_work is no longer pending and will never be started again. I actually just hit the case using rxe: WARNING: CPU: 0 PID: 138 at drivers/infiniband/sw/rxe/rxe_verbs.c:1032 rxe_post_recv+0x1ee/0x480 [rdma_rxe] ... [ 5305.686979] [ T138] smbd_post_recv+0x445/0xc10 [cifs] [ 5305.687135] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687149] [ T138] ? __kasan_check_write+0x14/0x30 [ 5305.687185] [ T138] ? __pfx_smbd_post_recv+0x10/0x10 [cifs] [ 5305.687329] [ T138] ? __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 5305.687356] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687368] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687378] [ T138] ? _raw_spin_unlock_irqrestore+0x11/0x60 [ 5305.687389] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687399] [ T138] ? get_receive_buffer+0x168/0x210 [cifs] [ 5305.687555] [ T138] smbd_post_send_credits+0x382/0x4b0 [cifs] [ 5305.687701] [ T138] ? __pfx_smbd_post_send_credits+0x10/0x10 [cifs] [ 5305.687855] [ T138] ? __pfx___schedule+0x10/0x10 [ 5305.687865] [ T138] ? __pfx__raw_spin_lock_irq+0x10/0x10 [ 5305.687875] [ T138] ? queue_delayed_work_on+0x8e/0xa0 [ 5305.687889] [ T138] process_one_work+0x629/0xf80 [ 5305.687908] [ T138] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5305.687917] [ T138] ? __kasan_check_write+0x14/0x30 [ 5305.687933] [ T138] worker_thread+0x87f/0x1570 ... It means rxe_post_recv was called after rdma_destroy_qp(). This happened because put_receive_buffer() was triggered by ib_drain_qp() and called: queue_work(info->workqueue, &info->post_send_credits_work); | ||||
| CVE-2025-39886 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init() Currently, calling bpf_map_kmalloc_node() from __bpf_async_init() can cause various locking issues; see the following stack trace (edited for style) as one example: ... [10.011566] do_raw_spin_lock.cold [10.011570] try_to_wake_up (5) double-acquiring the same [10.011575] kick_pool rq_lock, causing a hardlockup [10.011579] __queue_work [10.011582] queue_work_on [10.011585] kernfs_notify [10.011589] cgroup_file_notify [10.011593] try_charge_memcg (4) memcg accounting raises an [10.011597] obj_cgroup_charge_pages MEMCG_MAX event [10.011599] obj_cgroup_charge_account [10.011600] __memcg_slab_post_alloc_hook [10.011603] __kmalloc_node_noprof ... [10.011611] bpf_map_kmalloc_node [10.011612] __bpf_async_init [10.011615] bpf_timer_init (3) BPF calls bpf_timer_init() [10.011617] bpf_prog_xxxxxxxxxxxxxxxx_fcg_runnable [10.011619] bpf__sched_ext_ops_runnable [10.011620] enqueue_task_scx (2) BPF runs with rq_lock held [10.011622] enqueue_task [10.011626] ttwu_do_activate [10.011629] sched_ttwu_pending (1) grabs rq_lock ... The above was reproduced on bpf-next (b338cf849ec8) by modifying ./tools/sched_ext/scx_flatcg.bpf.c to call bpf_timer_init() during ops.runnable(), and hacking the memcg accounting code a bit to make a bpf_timer_init() call more likely to raise an MEMCG_MAX event. We have also run into other similar variants (both internally and on bpf-next), including double-acquiring cgroup_file_kn_lock, the same worker_pool::lock, etc. As suggested by Shakeel, fix this by using __GFP_HIGH instead of GFP_ATOMIC in __bpf_async_init(), so that e.g. if try_charge_memcg() raises an MEMCG_MAX event, we call __memcg_memory_event() with @allow_spinning=false and avoid calling cgroup_file_notify() there. Depends on mm patch "memcg: skip cgroup_file_notify if spinning is not allowed": https://lore.kernel.org/bpf/20250905201606.66198-1-shakeel.butt@linux.dev/ v0 approach s/bpf_map_kmalloc_node/bpf_mem_alloc/ https://lore.kernel.org/bpf/20250905061919.439648-1-yepeilin@google.com/ v1 approach: https://lore.kernel.org/bpf/20250905234547.862249-1-yepeilin@google.com/ | ||||
| CVE-2025-39829 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: trace/fgraph: Fix the warning caused by missing unregister notifier This warning was triggered during testing on v6.16: notifier callback ftrace_suspend_notifier_call already registered WARNING: CPU: 2 PID: 86 at kernel/notifier.c:23 notifier_chain_register+0x44/0xb0 ... Call Trace: <TASK> blocking_notifier_chain_register+0x34/0x60 register_ftrace_graph+0x330/0x410 ftrace_profile_write+0x1e9/0x340 vfs_write+0xf8/0x420 ? filp_flush+0x8a/0xa0 ? filp_close+0x1f/0x30 ? do_dup2+0xaf/0x160 ksys_write+0x65/0xe0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f When writing to the function_profile_enabled interface, the notifier was not unregistered after start_graph_tracing failed, causing a warning the next time function_profile_enabled was written. Fixed by adding unregister_pm_notifier in the exception path. | ||||