Export limit exceeded: 18157 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26198 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 421049 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (421049 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64270 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - reject an oversized device packet size mms114_interrupt() reads a packet of touch data from the device into a fixed-size on-stack buffer struct mms114_touch touch[MMS114_MAX_TOUCH]; which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes, i.e. 80 bytes. The length of the I2C read into it is taken verbatim from the device: packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE); if (packet_size <= 0) goto out; ... error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size, (u8 *)touch); packet_size is a single device register byte (0x0F) and the only check is the lower bound packet_size <= 0; it is never bounded against the size of touch[]. A malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can report a packet_size of up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of touch[] on the IRQ-thread stack: a stack out-of-bounds write that can overwrite the stack canary, saved registers and the return address. A well-formed device never reports more than the buffer holds, so reject an oversized packet and drop the report, consistent with the handler's other error paths, rather than reading past the buffer. | ||||
| CVE-2026-64256 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't wrap around quota ids in dqiterate LOLLM noticed that q_id is an unsigned 32-bit variable. If it happens to be set to XFS_DQ_ID_MAX due to a filesystem that actually has a dquot for ID_MAX, then this addition will truncate to zero and the iteration starts over. Fix this by casting to u64. | ||||
| CVE-2026-64253 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kernel/fork: clear PF_BLOCK_TS in copy_process() PF_BLOCK_TS is only set in blk_time_get_ns() when current->plug is non-NULL, and blk_finish_plug() clears it via __blk_flush_plug() before NULLing the plug pointer. copy_process() breaks the invariant by inheriting PF_BLOCK_TS from the parent while resetting the child's plug to NULL. Clear PF_BLOCK_TS alongside that assignment so callers can rely on "PF_BLOCK_TS set implies current->plug != NULL" and dereference current->plug unguarded. | ||||
| CVE-2026-64245 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: modedb: fix a possible UAF in fb_find_mode() If mode_option is NULL, it is assigned from mode_option_buf: if (!mode_option) { fb_get_options(NULL, &mode_option_buf); mode_option = mode_option_buf; } Later, name is assigned from mode_option: const char *name = mode_option; However, mode_option_buf is freed before name is no longer used: kfree(mode_option_buf); while name is still accessed by: if ((name_matches(db[i], name, namelen) || Since name aliases mode_option_buf, this may result in a use-after-free. Fix this by extending the lifetime of mode_option_buf until the end of the function by using scope-based resource management for cleanup. | ||||
| CVE-2026-64244 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drivers/base/memory: set mem->altmap after successful device registration If __add_memory_block() fails at xa_store() (under memory pressure for example), device_unregister() is called, which eventually triggers memory_block_release() with mem->altmap still set, causing a WARN_ON(mem->altmap). This was triggered by modifying virtio-mem driver. Fix this by delaying the assignment of mem->altmap until after __add_memory_block() has succeeded. | ||||
| CVE-2026-64239 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: delete tried region in regions_rmdirs() DAMON sysfs maintains the DAMOS tried region directory objects via a linked list. When the user requests refresh of the directories, DAMON sysfs removes all the region directories first, and then generate updated regions directory on the empty space. The removal function (damon_sysfs_scheme_regions_rm_dirs()) only puts the kobj objects. Deletion of the container region object from the linked list is done inside the kobj release callback function. If somehow the callback invocation is delayed, the list will contain regions list that gonna be freed. If the updated region directories creation is started in this situation, the list can be corrupted and use-after-free can happen. Because the kobj objects are managed by only DAMON sysfs, the issue cannot happen in normal situation. But, such delays can be made on kernels that built with CONFIG_DEBUG_KOBJECT_RELEASE. On the kernel, the issue can indeed be reproduced like below. # damo start --damos_action stat # cd /sys/kernel/mm/damon/admin/kdamonds/0/ # for i in {1..10}; do echo update_schemes_tried_regions > state; done # dmesg | grep underflow [ 89.296152] refcount_t: underflow; use-after-free. Fix the issue by removing the region object from the list when decrementing the reference count. Also update damos_sysfs_populate_region_dir() to add the region object to the list only after the kobject_init_and_add() is success, so that fail of kobject_init_and_add() is not leaving the deallocated object on the list. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-64237 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: elan_i2c - validate firmware size before use Ensure that the firmware file is large enough to contain the expected number of pages and the signature (which resides at the end of the firmware blob) before accessing them to prevent potential out-of-bounds reads. | ||||
| CVE-2026-64227 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: driver: Check ACPI_COMPANION() against NULL during probe Since every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), platform drivers that rely on the existence of a device's ACPI companion object should verify its presence. Accordingly, add requisite ACPI_COMPANION() or ACPI_HANDLE() checks against NULL to 13 platform drivers handling core ACPI devices. Also change the value returned by the ACPI thermal zone driver when the device's ACPI companion is not present to -ENODEV for consistency with the other drivers. | ||||
| CVE-2026-64225 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: CGX: add bounds check to cgx_speed_mbps index cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values 0-15. If it returns a value >= 13, this causes an out-of-bounds array access. Add a bounds check and default to speed 0 if the index is out of range. | ||||
| CVE-2026-64224 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: fix double free in rvu_rep_rsrc_init() rvu_rep_rsrc_init() allocates queue memory before calling otx2_init_hw_resources(). When hardware resource setup fails, otx2_init_hw_resources() already unwinds the partially initialized SQ, CQ, and aura state before returning an error. The representor error path then calls otx2_free_hw_resources() again and can free the same resources a second time. Fix this by splitting the cleanup labels so that a failure from otx2_init_hw_resources() only releases queue memory. Keep the otx2_free_hw_resources() call for failures that happen after hardware resource initialization completed successfully. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2 representor hardware. | ||||
| CVE-2026-64220 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: device property: set fwnode->secondary to NULL in fwnode_init() If a firmware node is allocated on the stack (for instance: temporary software node whose life-time we control) or on the heap - but using a non-zeroing allocation function - and initialized using fwnode_init(), its secondary pointer will contain uninitalized memory which likely will be neither NULL nor IS_ERR() and so may end up being dereferenced (for example: in dev_to_swnode()). Set fwnode->secondary to NULL on initialization. | ||||
| CVE-2026-64213 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Add lock protection to lm90_alert Sashiko reports: lm90_alert() executes in the smbus alert context and calls lm90_update_confreg() to disable the hardware alert line, without acquiring hwmon_lock. Concurrently, sysfs write operations (such as lm90_write_convrate) hold the hwmon_lock, temporarily modify data->config, and then restore it. If an alert interrupt occurs concurrently with a sysfs write, the sysfs path will overwrite the alert handler's modifications to data->config and the hardware register. This unintentionally re-enables the hardware alert line while the alarm is still active, causing an interrupt storm. Add the missing lock to lm90_alert() to solve the problem. | ||||
| CVE-2026-64212 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it In iwl_mld_remove_link, the link->fw_id is saved at the beginning of the function so we have it after we freed the link. But the link pointer can be NULL, and is not checked when the fw_id is stored. Fix it by simply freeing the link at the end of the function. fFixes: 0e66a39f4f0e ("wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()") | ||||
| CVE-2026-64205 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: i801: fix hardware state machine corruption in error path A severe livelock and subsequent Hung Task panic were observed in the i2c-i801 driver during concurrent Fuzzing. The crash is caused by an unconditional hardware register cleanup in the error handling path of i801_access(). When i801_check_pre() fails (e.g., returning -EBUSY because the SMBus controller is actively used by BIOS/ACPI), the kernel does not actually acquire the hardware ownership. However, the code jumps to the 'out' label and executes: iowrite8(SMBHSTSTS_INUSE_STS | STATUS_FLAGS, SMBHSTSTS(priv)); This forcefully clears the INUSE_STS lock and resets the hardware status flags without owning the controller. Doing so interrupts ongoing BIOS/ACPI transactions and totally corrupts the SMBus hardware state machine. Consequently, all subsequent i801_access() calls fail at the pre-check stage, triggering an endless stream of "SMBus is busy, can't use it!" error logs. Over a slow serial console, this printk flood monopolizes the CPU (Console Livelock), starving other processes trying to acquire the mmap_lock down_read semaphore, ultimately triggering the hung task watchdog. Fix this by moving the 'out' label below the hardware register cleanup. If i801_check_pre() fails, we safely bypass the iowrite8() and only release the software locks (pm_runtime and mutex), strictly adhering to the rule of not releasing resources that were never acquired. | ||||
| CVE-2026-64192 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized When CONFIG_BPF_LSM=y is set, BPF inode storage maps (BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However, if the BPF LSM is not explicitly enabled at boot time (e.g. omitted from the "lsm=" boot parameter), lsm_prepare() is never executed for the BPF LSM. Consequently, the BPF inode security blob offset (bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at its default compiled size of 8 bytes instead of being updated to a valid offset past the reserved struct rcu_head (typically 16 bytes or more). When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE map, bpf_inode() evaluates inode->i_security + 8. This erroneously aliases the struct rcu_head.func callback pointer at the beginning of the inode->i_security blob. During subsequent map element cleanup or inode destruction, writing NULL to owner_storage clears the queued RCU callback pointer. When rcu_do_batch() later executes the queued callback, it attempts an instruction fetch at address 0x0, triggering an immediate kernel panic. Fix this by introducing a global bpf_lsm_initialized boolean flag marked with __ro_after_init. Set this flag to true inside bpf_lsm_init() when the LSM framework successfully registers the BPF LSM. Gate map allocation in inode_storage_map_alloc() on this flag, returning -EOPNOTSUPP if the BPF LSM is in turn uninitialized. This fail-fast approach prevents userspace from allocating inode storage maps when the supporting BPF LSM infrastructure is absent, avoiding zombie map states. | ||||
| CVE-2026-64190 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: team: fix NULL pointer dereference in team_xmit during mode change __team_change_mode() clears team->ops with memset() before restoring safe dummy handlers via team_adjust_ops(). A concurrent team_xmit() running under RCU on another CPU can read team->ops.transmit during this window and call a NULL function pointer, crashing the kernel. The race requires a mode change (CAP_NET_ADMIN) concurrent with transmit on the team device. BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: 0010 [#1] SMP KASAN NOPTI RIP: 0010:0x0 Call Trace: team_xmit (drivers/net/team/team_core.c:1853) dev_hard_start_xmit (net/core/dev.c:3904) __dev_queue_xmit (net/core/dev.c:4871) packet_sendmsg (net/packet/af_packet.c:3109) __sys_sendto (net/socket.c:2265) The original code assumed that no ports means no traffic, so mode changes could freely memset()/memcpy() the ops. AF_PACKET with forced carrier breaks that assumption. Prevent the race instead of making it safe: replace memset()/memcpy() with per-field updates that never touch transmit or receive. Those two handlers are managed solely by team_adjust_ops(), which already installs dummies when tx_en_port_count == 0 (always true during mode change since no ports are present). WRITE_ONCE/READ_ONCE prevent store/load tearing on the handler pointers. synchronize_net() before exit_op() drains in-flight readers that may still reference old mode state from before port removal switched the handlers to dummies. | ||||
| CVE-2026-64187 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fail recovery on a committed log item with no regions If the first op of a transaction is a bare transaction header (len == sizeof(struct xfs_trans_header)), xlog_recover_add_to_trans() adds an item but no region, leaving it on r_itemq with ri_cnt == 0 and ri_buf == NULL. The header can be split across op records, so later ops may still add regions; the item is only invalid if the transaction commits with none. The runtime commit path never emits such a transaction, so this only happens on a crafted log. It came from an AI-assisted code audit of the recovery parser. xlog_recover_reorder_trans() calls ITEM_TYPE() on the item, which reads *(unsigned short *)item->ri_buf[0].iov_base and faults on the NULL ri_buf. Reject it there, before the commit handlers that also read ri_buf[0]. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:xlog_recover_reorder_trans (fs/xfs/xfs_log_recover.c:1836) xlog_recover_commit_trans (fs/xfs/xfs_log_recover.c:2043) xlog_recover_process_data (fs/xfs/xfs_log_recover.c:2501) xlog_do_recovery_pass (fs/xfs/xfs_log_recover.c:3244) xlog_recover (fs/xfs/xfs_log_recover.c:3493) xfs_log_mount (fs/xfs/xfs_log.c:618) xfs_mountfs (fs/xfs/xfs_mount.c:1034) xfs_fs_fill_super (fs/xfs/xfs_super.c:1938) vfs_get_tree (fs/super.c:1695) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367) | ||||
| CVE-2026-64186 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs In iommu_mmio_write() and iommu_capability_write(), the variables dbg_mmio_offset and dbg_cap_offset are declared as int. However, they are populated using kstrtou32_from_user(). If a user provides a sufficiently large value, it can become a negative integer. Prior to this patch, the AMD IOMMU debugfs implementation was already protected by different mechanisms. 1. #define OFS_IN_SZ 8 ensures the user string <= 8 bytes, so e.g. 0xffffffff isn't a valid input. if (cnt > OFS_IN_SZ) return -EINVAL; 2. Implicit type promotion in iommu_mmio_write(), dbg_mmio_offset is int and iommu->mmio_phys_end is u64 if (dbg_mmio_offset > iommu->mmio_phys_end - sizeof(u64)) return -EINVAL; 3. The show handlers would currently catch the negative number and refuse to perform the read. Replace kstrtou32_from_user() with kstrtos32_from_user() to parse the input, and check for negative values to explicitly prevent out-of-bounds memory accesses directly in iommu_mmio_write() and iommu_capability_write(). | ||||
| CVE-2026-64185 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sysfs: don't remove existing directory on update failure When sysfs_update_group() is called for a named group and create_files() fails (e.g. -ENOMEM), internal_create_group() calls kernfs_remove(kn) on the group directory. In the update path, kn was obtained via kernfs_find_and_get() and refers to a directory that already existed before this call. Removing it silently destroys a sysfs group that the caller did not create. Only remove the directory if we created it ourselves. On update failure the directory remains as it is left empty by remove_files() inside create_files(), but can be repopulated by a retry. | ||||
| CVE-2026-64184 | 1 Linux | 1 Linux Kernel | 2026-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: call missing mem_cgroup_iter_break() damon_sysfs_memcg_path_to_id() breaks mem_cgroup_iter() loop without calling mem_cgroup_iter_break(). This leaks the cgroup reference. Fix the issue by calling mem_cgroup_iter_break() before the break. The issue was discovered [1] by Sashiko. | ||||