| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The PayHere Payment Gateway WordPress plugin from 2.4.0 through 2.4.5 does not verify the authenticity of payment notifications when the merchant secret is unset, which is the default state, allowing unauthenticated attackers to forge a payment confirmation and mark any order as paid without payment. |
| A weakness has been identified in mathurvishal CloudClassroom-PHP-Project. This issue affects some unknown processing of the component Global Session Handler. Executing a manipulation can lead to session expiration. The attack may be launched remotely. A high complexity level is associated with this attack. The exploitability is assessed as difficult. The exploit has been made available to the public and could be used for attacks. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The vendor was contacted early about this disclosure but did not respond in any way. |
| Insufficient session expiration in Apache Wicket.
org.apache.wicket.protocol.ws.WebSocketSettings#newWebSocketRequest() wraps the WebSocket upgrade request in an org.apache.wicket.protocol.ws.api.ServletRequestCopy, which is kept for the life of the connection and used to build the request for every frame that arrives on it. Copying the request is deliberate and is documented as such, because the container recycles the upgrade request once the handshake is over. The container session is copied along with it, into an org.apache.wicket.protocol.ws.api.HttpSessionCopy holding the session attributes as they stood when the connection was opened. That second copy is not necessary, because a session, unlike a request, is not discarded at the end of a request. Every frame afterwards resolves its Wicket session through ISessionStore#lookup(), which reads it out of the copy, so the connection is detached from the live container session for as long as it stays open.
Ending the session through the container therefore does not end the connection. After an idle timeout, an HttpSession#invalidate() call made from a filter or from a security framework, a container-managed logout, or a session replacement, the connection goes on resolving the org.apache.wicket.Session instance that existed when it was opened, together with that session's attributes and, for applications built on wicket-auth-roles, the signed-in state held on that same instance, so an authorization decision taken inside a WebSocket callback is taken against an identity that has already been revoked. The copy is also what the connection writes through: a Session#invalidateNow() issued from inside a WebSocket callback invalidates the copy and leaves the container session valid, and session attributes set over the connection are written to the copy rather than to the session.
An application is affected where it uses Wicket's native WebSocket support on pages or shared resources that require an authenticated session, and where sessions are ended by the container rather than by Wicket. Session#invalidateNow(), and AuthenticatedWebSession#invalidate() and #signOut() which call it, remain effective for a WebSocketBehavior on a page: they clear the page manager, and the connection can then no longer resolve the page it was opened for. A WebSocketResource is not limited in that way, because a frame naming a resource is served against a throwaway page and never consults the page manager, so such a connection outlives Wicket's own sign-out as well. Some containers close WebSocket connections themselves when the HTTP session they were opened under is destroyed, in which case the connection ends regardless; that is a property of the container rather than of Wicket. Applications that do not use the native WebSocket support are not affected.
This issue affects Apache Wicket: from 8.0.0 through 8.19.0, from 9.0.0 through 9.24.0, from 10.0.0 through 10.11.0. Older, unsupported releases from 6.0.0 onwards are also affected. Users are recommended to upgrade to version 8.20.0, 9.25.0 or 10.12.0, which fix the issue. |
| Coop is an open source review and moderation tool from ROOST. Prior to 1.0.2, `resetPasswordForToken` updates the password row without invalidating database-backed sessions. An attacker who has acquired a password and established a session retains access even after the legitimate user resets the password, leaving the compromised account under attacker control until the session expires at its `30-day` maximum age. This issue is fixed in version 1.0.2. |
| pgAdmin 4 did not invalidate a user's existing sessions when their password changed, either through the user's own change password dialog or through an administrator resetting it in User Management. A session established before the change, for example on another device or by someone who had obtained the old password or a session cookie, therefore stayed logged in after the change, which is the step a user or administrator takes precisely to cut such access off. It remained usable until it expired.
The fix rotates the user's session identifier (fs_uniquifier) whenever the password is changed, so every other session of that user is logged out. The session that made the change is logged in again and keeps its database connections. Saved server passwords, including those for shared servers, are re-encrypted under the new key; any that cannot be decrypted are cleared and the user is told. If re-encryption fails, the sessions are still revoked and the saved passwords are cleared rather than the change failing.
This issue affects pgAdmin 4: before 9.19. |
| The system fails to invalidate existing access tokens associated with sub-organization users during sensitive account management operations such as password reset, role change, or sub-organization disablement. This oversight allows previously issued tokens to remain active even after the user's access context has been modified or revoked through administrative actions.
The identified issue could lead to unauthorized access by a malicious actor, but only when all of the following conditions are met: previously issued access tokens remain active, and these tokens have been exposed to malicious actors. |
| Supabase Realtime provides Broadcast, Presence, and Postgres Changes via WebSockets. Prior to version 2.103.1, the REST broadcast endpoints accept an expired JWT when the exp claim is encoded as a JSON string instead of a JSON number. The same route rejects an expired integer exp token signed with the same tenant secret. The accepted request returns 202 and emits the broadcast to subscribers. This could allow an unauthenticated attacker can broadcast realtime messages to subscribers. The attack can be performed via the Internet/only from within the supabase project. The impact of broadcasting messages to subscribers is application specific. This issue has been patched in version 2.103.1. |
| ArcadeDB before 26.10.2 contains an improper authorization vulnerability that allows revoked users to retain access through already-open Postgres, Bolt, MongoDB, or Redis wire-protocol connections. Attackers holding an existing connection can keep reading and writing data after deletion, grant removal, or password rotation, because executors keep a stale ServerSecurityUser. |
| GraphQL Tools provides utilities for building, stitching, and mocking GraphQL schemas. Prior to version 1.1.36 of the GraphQL Tools legacy WebSocket executor package, buildWSLegacyExecutor in packages/executors/legacy-ws/src/index.ts retains request.extensions.connectionParams in the closure-scoped executorConnectionParams object after cleanupWebsocket closes a connection. When one executor is reused across different authorization contexts, a later request that omits a sensitive key can send an earlier caller's Authorization or tenant value in its connection_init payload, causing the downstream server to authenticate the later caller as the earlier user. Applications that create a new executor for every request are not affected. This issue is fixed in version 1.1.36 of the GraphQL Tools legacy WebSocket executor package. |
| OpenBao before 2.6.4 and 2.7.x before 2.7.1 does not check Secret ID expiration at use in the AppRole auth method, leaving expired Secret IDs valid until the periodic tidy removes them. An attacker holding an expired, untidied Secret ID can log in and gain access beyond its TTL. |
| When the `allowed_scopes` configuration is enabled, the OAuth2 token introspection mechanism does not immediately invalidate a token in the cache after a revocation request. This results in a scenario where an access token that was introspected immediately before a revocation request may be returned again to the client after revocation, until the relevant cache entry is cleared.
The security consequence is that a revoked access token may be re-issued to the client during the cache lifetime. While the re-issued token is not treated as valid for API authorization, affected users may be unable to obtain a new valid access token until the cache is cleared, which can disrupt authentication flows. |
| In deployments of WSO2 Identity Server configured with a case-insensitive user store and a case-sensitive database for identity data, mismatches in username case handling can occur. This inconsistency results in OAuth token revocation operations failing to correctly identify usernames containing mixed-case characters during certain lifecycle events, preventing tokens from being invalidated.
A malicious actor can exploit this vulnerability by possessing a valid access or refresh token associated with a mixed-case username. In affected configurations, these tokens may not be revoked when expected. The actor can then leverage these unrevoked tokens, before their expiry, to continue performing actions that should have been restricted, effectively bypassing intended access controls. |
| @fastify/session is a session plugin for Fastify. In all releases before 11.1.6, with the default rolling session behavior, a request that restored a session before a logout could save its own copy after another request had completed the session destroy call, recreating the destroyed session identifier with its authenticated data. An attacker who already holds a victim's valid signed session cookie and keeps a request in flight across the logout can replay that cookie to restore the session after it was meant to be revoked, without any cookie theft or signature forgery. The issue is fixed in @fastify/session 11.1.6, which adds a per session generation marker and a conditional store write so a session restored before a logout or regeneration cannot recreate or overwrite the current entry, and users should upgrade to 11.1.6 or later. There is no workaround, and custom session stores must implement the new conditional write. |
| MikroTik RouterOS through 7.24.5 contains a session token replay vulnerability in the WebFig interface that allows attackers to bypass authentication by replaying captured session tokens across new ECDH sessions. The makeSessionKey function in libucrypto.so generates tokens using fixed salts without incorporating channel-specific or session-specific input, and the user service validates tokens against the login store without verifying channel context, enabling stolen tokens to grant persistent administrative access until the token store is explicitly cleared. This vulnerability extends the impact of CVE-2025-61481, which identified the underlying transport-layer exposure without a corresponding fix. |
| REDAXO before 5.21.5 contains an insufficient session expiration vulnerability that allows attackers to retain account access by keeping the current session and stay-logged-in key valid after a password change. Attackers who obtained a user's session id or stay-logged-in cookie can keep backend access after the password change, via the cookie for up to three months. |
| The twofactor_gauthenticator plugin for Roundcube is vulnerable to session persistence after failed 2FA verification. Due to the lack of server-side session destruction, an attacker can ignore the logout redirect and keep the session alive. This may allow an attacker who obtains user's password to e.g. brute force the second-factor code.
This issue was fixed in commit 4640889. |
| SmarterMail before build 9777 contains a privilege escalation vulnerability where JWT access and refresh tokens embed a role claim at issuance that is not revalidated against the account's current role when redeemed through POST /api/v1/auth/refresh-token. Attackers who capture a refresh token issued before an administrator demotion, or a demoted user whose session was not actively polling at the time of demotion, can replay the stale token to obtain a new access token retaining the higher-privilege role (such as DomainAdmin or SysAdmin) until natural token expiry. |
| Insufficient Session Expiration vulnerability in Apache Camel Keycloak component.
This issue affects Apache Camel: from 4.16.0 before 4.18.5, from 4.19.0 before 4.22.2.
When token introspection is enabled on the camel-keycloak KeycloakSecurityPolicy (useTokenIntrospection=true), the security processor validates the access token of a request by sending it to Keycloak's OAuth 2.0 token introspection endpoint, and accepts the token while the response reports it as active. The introspection endpoint reports a token as inactive once its exp (expiration) time has passed, so on this path the active flag is what enforces token expiry. Introspection results are cached by default (introspectionCacheEnabled=true, introspectionCacheTtl=60 seconds), and both cache implementations shipped with the component, ConcurrentMapTokenCache and CaffeineTokenCache, expired an entry a fixed time after it was inserted, without bounding that lifetime by the exp claim that the cached response already carried. KeycloakSecurityProcessor in turn checked only the active flag of the result, on every path that uses introspection, and never compared exp with the current time. A response cached shortly before the token expired was therefore served to later requests carrying the same token for up to the configured time-to-live after the token's expiry, and those requests were admitted with the roles and permissions the expired token had carried, although RFC 7662, which defines token introspection, states that a response containing exp must not be cached beyond that time. The access token is supplied by the caller with each request, typically as a bearer token in the Authorization header, so a caller holding a token that was valid moments earlier could keep using it after it expired, for as long as the cached entry lived. The window is bounded by introspectionCacheTtl, which is 60 seconds by default and 300 to 600 seconds where the documentation's recommendation for internal services was followed, and it opens only for a token that the same Camel process introspected and cached while the token was still active. The issue grants nothing beyond what the token already carried: it allows no token forgery and no privilege escalation, and token introspection is not enabled by default, which is why the severity is assessed medium. The local JWT verification path, used when introspection is disabled, is not affected by this issue.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.16.x, 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, set introspectionCacheEnabled=false on the KeycloakSecurityPolicy, so that every request is checked against the introspection endpoint, which reports an expired token as inactive, at the cost of one introspection call per request. Lowering introspectionCacheTtl only narrows the window and does not close it. |
| OpenBao before 2.6.4 and 2.7.x before 2.7.1 does not verify, when renewing a token issued by the Kubernetes Auth method, that the service account token originally used to authenticate is still valid. An authenticated attacker can keep renewing such tokens to persist access after the Kubernetes service account has been deleted. |
| Django REST framework is a toolkit for building Web APIs. From 3.12.0 until 3.18.2, TokenProxy.delete() in rest_framework/authtoken/models.py uses the proxy's user-id pk while the concrete Token token-string primary key identifies rows, so Django issues a deletion query that matches no row and reports zero deletions without raising an error. Applications, administrative integrations, or operational scripts that revoke credentials through a TokenProxy instance can therefore believe revocation succeeded while the token remains live and continues authenticating. DRF's own TokenAdmin.delete_model workaround is not affected, but other callers can leave access available indefinitely because DRF tokens do not expire automatically. This issue is fixed in version 3.18.2. |
