| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.14.0, an attacker can craft a PDF with repeated malformed cross-reference streams that cause pypdf to spend long runtimes recovering broken cross-reference table entries. This issue is fixed in version 6.14.0. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.7.1, an attacker who uses this vulnerability can craft a PDF which leads to long runtimes and large memory consumption. This requires parsing the /ToUnicode entry of a font with unusually large values, for example during text extraction. This vulnerability is fixed in 6.7.1. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.7.3, an attacker who uses this vulnerability can craft a PDF which leads to the RAM being exhausted. This requires accessing the `xfa` property of a reader or writer and the corresponding stream being compressed using `/FlateDecode`. This has been fixed in pypdf 6.7.3. As a workaround, apply the patch manually. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.15.0, a crafted PDF can cause long runtimes and large memory consumption when pypdf/_font.py function Font._collect_cid_character_widths expands unusually large CID font /W width ranges or excessive width entries during text extraction. This issue is fixed in 6.15.0. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.7.1, an attacker who uses this vulnerability can craft a PDF which leads to long runtimes. This requires a malformed /FlateDecode stream, where the byte-by-byte decompression is used. This vulnerability is fixed in 6.7.1. |
| NetBox MCP Server is a simple read-only Model Context Protocol server for NetBox. Prior to version 1.2.1, when running with TRANSPORT=http, the MCP server has no authentication on the HTTP endpoint. Any client that can reach the port gets a valid MCP session and full access to all four NetBox tools - no token or credential needed. This issue has been patched in version 1.2.1. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/kmemleak: avoid soft lockup when scanning task stacks
Patch series "mm/kmemleak: avoid soft lockup when scanning task", v3.
kmemleak_scan() scans every task stack under one rcu_read_lock() with no
reschedule point, which can trip the soft lockup watchdog on hosts with
very many threads.
That prints the following message, depending on the workload+host
configuration:
watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537]
scan_block
kmemleak_scan
kmemleak_scan_thread
kthread
Patch 1 walks the tasks with find_ge_pid() so the scan reschedules between
tasks
Patches 2-3 let the scan loops stop early once a scan is interrupted.
This patch (of 3):
kmemleak_scan() walks every thread and scans its kernel stack under a
single rcu_read_lock() with no reschedule point. On a host with very many
threads -- amplified by KASAN/lockdep in debug builds -- this loop can hog
a CPU long enough to trip the soft lockup watchdog:
watchdog: BUG: soft lockup - CPU#35 stuck for 22s! [kmemleak:537]
scan_block
kmemleak_scan
kmemleak_scan_thread
kthread
A cond_resched() cannot be added directly: the loop runs inside an RCU
read-side critical section.
Walk the tasks one PID at a time with find_ge_pid(), taking the RCU read
lock only to look up and pin each task. The stack is then scanned with no
lock held, so cond_resched() runs between tasks and the scan stops early
on scan_should_stop(). This follows the next_tgid()/task_seq_get_next()
iteration pattern and keeps each RCU critical section short. |
| A type confusion issue was addressed with improved checks. This issue is fixed in Safari 27.2, iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, visionOS 27.2. Processing maliciously crafted web content may lead to memory corruption. |
| An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in iOS 27.2 and iPadOS 27.2. An app may be able to cause unexpected system termination or write kernel memory. |
| kin-openapi is a Go project for handling OpenAPI files. From 0.145.0 until 0.146.0, openapi3filter repeatedly calls regexp.MustCompile for the same parameter-name regular expression inside the per-query-key loop in urlValuesDecoder.DecodeObject used to decode a deepObject query parameter. An unauthenticated remote client can send an affected endpoint a request containing many unrelated query keys, causing ValidateRequest to perform work and allocations proportional to the attacker-controlled key count for every deepObject parameter. The expression itself is fixed and this is not regular expression denial of service; the resource consumption comes from loop-invariant recompilation. This issue is fixed in version 0.146.0. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch()
__htab_map_lookup_and_delete_batch() has no rescheduling point. The
batch count bounds how many entries are copied out, not how many
buckets are visited, so one BPF_MAP_LOOKUP_BATCH call can walk the
map end to end. The empty-bucket fast path is worse: it stays inside
a single rcu_read_lock() / bpf_disable_instrumentation() section for
any run of consecutive empty buckets.
That holds up on small maps, but it falls apart at scale. On a
144-CPU arm64 host running a CONFIG_PREEMPT_NONE kernel, periodic
BPF_MAP_LOOKUP_BATCH calls against an LRU hash map with 16,777,216
buckets held a CPU inside the batch op for 77+ seconds and triggered
the soft lockup watchdog.
Commit 75134f16e7dd ("bpf: Add schedule points in batch ops") fixed this
same problem in the generic batch ops, but not in this htab-native path,
which every htab-based hash map variant uses for its lookup[_and_delete]
batch ops.
Complete that fix here. Leave the critical section after 64 consecutive
empty buckets, call cond_resched_tasks_rcu_qs(), and resume at the saved
bucket cursor. No locks are held at that point, and resuming from the
cursor is already the function's behavior for non-empty buckets. Add the
same call to the per-bucket loop after copy_to_user(), where every lock
has been dropped. cond_resched_rcu() is not enough here: sleeping with
bpf_prog_active elevated makes tracing programs on that CPU silently
skip their invocations.
Plain cond_resched() is not enough either. It is a no-op under PREEMPT
and PREEMPT_LAZY, the only models arm64 and x86 have offered since
commit 7dadeaa6e851 ("sched: Further restrict the preemption modes").
It is also never a Tasks RCU quiescent state, in any model: the
reschedule counts as a preemption. The walking task stays a holdout and
stalls every synchronize_rcu_tasks() caller, ftrace and BPF trampoline
teardown included, until the syscall returns [1].
cond_resched_tasks_rcu_qs() is the usual tool for that [2]. It reports
the quiescent state at each yield and still reschedules as
cond_resched() does on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels. |
| A flaw was found in libtirpc. A remote attacker can exploit this vulnerability by sending specially crafted PMAPPROC_DUMP replies to a client application that uses the pmap_getmaps() function against an attacker-controlled host. This unbounded decoding can lead to excessive memory and CPU allocation, causing the client process to experience a Denial of Service (DoS) due to resource exhaustion. |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: bound cleanup_offline_cgwb() rescans by rotating scanned inodes
cleanup_offline_cgwb() prepares at most WB_MAX_INODES_PER_ISW inodes
per call and is called again until the dying wb is drained, but every
call walks wb->b_attached and then wb->b_dirty_time from the same end.
Inodes already prepared (they stay on the list with I_WB_SWITCH set
until the switch worker runs) and inodes that cannot be switched
(I_FREEING, I_WILL_FREE, !SB_ACTIVE, DAX, already on the target wb)
stay where they are, so each pass rescans a growing run of them under
wb->list_lock and a full drain is quadratic in the number of inodes on
the list. With ~17M inodes attached to one dying cgwb we saw this end
in soft lockups, with CPUs reported stuck for 21-48s.
Walk both lists from the oldest end and move every scanned inode to
the newest end, so the next pass starts where the previous one stopped
and the drain becomes linear. b_attached is unordered, so nobody sees
the reorder there. b_dirty_time is ordered by dirtied_when, but the
oldest unscanned inode stays at the end move_expired_inodes() picks
from, sync takes the whole list regardless of order, and prepared
inodes leave the list as soon as the switch work runs and get a new
dirtied_time_when on the new wb anyway, so the only inodes left out of
order are the ones that can never switch (DAX), and only on the dying
wb. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: drop stray 'static' from fast-RX rx_result
ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but
its per-invocation rx_result is declared static. Concurrent callers then
share one instance and can overwrite each other's result between
ieee80211_rx_mesh_data() and the switch on res.
That can make a packet that was queued or consumed by
ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make
a packet that should continue return as queued.
Make res an automatic variable so each invocation keeps its own result. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item
commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work
run loop") fixed the obvious case where io_worker_handle_work() took one
exit-bit snapshot before draining pending work, but the fix stops one
level too early.
io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work
run loop, yet it still snapshots that bit once before processing a whole
dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT
after the first linked item has started, the remaining linked items can
still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue
running after exit has begun.
Move the check further inside, so it covers linked items too. Note: this
is a syzbot special as it loves setting up tons of slow linked work on
weird devices like msr that take forever to read, and immediately close
the ring. Exit then takes a long time. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
The error handling in nilfs_empty_dir() when a directory folio/page read
fails is incorrect, as in the old ext2 implementation, and if the
folio/page cannot be read or nilfs_check_folio() fails, it will falsely
determine the directory as empty and corrupt the file system.
In addition, since nilfs_empty_dir() does not immediately return on a
failed folio/page read, but continues to loop, this can cause a long loop
with I/O if i_size of the directory's inode is also corrupted, causing the
log writer thread to wait and hang, as reported by syzbot.
Fix these issues by making nilfs_empty_dir() immediately return a false
value (0) if it fails to get a directory folio/page. |
| A flaw was found in Keycloak. An unauthenticated attacker can exploit this vulnerability by sending a specially crafted POST request with an excessively long scope parameter to the OpenID Connect (OIDC) token endpoint. This leads to high resource consumption and prolonged processing times, ultimately resulting in a Denial of Service (DoS) for the Keycloak server. |
| Uncontrolled Resource Consumption vulnerability in Samsung Open Source rlottie allows Excessive Allocation. |
| A denial of service via unsigned underflow in libXpm's write path in libXpm before 3.5.19 could be used by local attackers to cause unbounded CPU usage and memory exhaustion. |
| In NLnetLabs Unbound up to and including 1.26.0, a degradation of service vulnerability is present in the TCP/DoT reading procedure where there is no limit on consecutive reads. A malicious actor that can stream and sustain a rate of distinct uncached names over the TCP/DoT connection, monopolizes a single worker's entire event loop for as long as its writes stay ahead of the drain. |
