| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: cmipci: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails.
snd_cmipci_spdif_controls() does not check the return value before
dereferencing kctl->id.device, which can lead to a NULL pointer
dereference.
Add NULL checks after snd_ctl_new1() calls and return -ENOMEM if any
fails. |
| NULL Pointer Dereference vulnerability in Apache NimBLE in LE Long Term Key Request event.
This requires disabled asserts (otherwise assert would trigger before NULL dereference) and bogus (or misbehaving) controller, thus severity is low.
This issue affects Apache NimBLE: through 1.9.0.
Users are recommended to upgrade to version 1.10.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd
When the remoteproc starts in parallel with the NGD driver being probed,
or the remoteproc is already up when the PDR lookup is being registered,
or in the theoretical event that we get an interrupt from the hardware,
these callbacks will operate on uninitialized data. This result in
issues to boot the affected boards.
One such example can be seen in the following fault, where
qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work.
[ 21.858578] ------------[ cut here ]------------
[ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116
...
[ 21.859251] Call trace:
[ 21.859255] __queue_work+0x5e0/0x790 (P)
[ 21.859265] queue_work_on+0x6c/0xf0
[ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl]
[ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl]
[ 21.859318] notifier_call_chain+0xa4/0x230
[ 21.859329] srcu_notifier_call_chain+0x64/0xb8
[ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common]
[ 21.859355] rproc_start+0x130/0x230
[ 21.859367] rproc_boot+0x3d4/0x518
...
Move the enablement of interrupts, and the registration of SSR and PDR
until after the NGD device has been registered.
This could be further refined by moving initialization to the control
driver probe and by removing the platform driver model from the picture. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Always pass in an error pointer to __sev_platform_shutdown_locked()
When
9770b428b1a2 ("crypto: ccp - Move dev_info/err messages for SEV/SNP init and shutdown")
moved the error messages dumping so that they don't need to be issued by
the callers, it missed the case where __sev_firmware_shutdown() calls
__sev_platform_shutdown_locked() with a NULL argument which leads to
a NULL ptr deref on the shutdown path, during suspend to disk:
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 983 Comm: hib.sh Not tainted 6.17.0-rc4+ #1 PREEMPT(voluntary)
Hardware name: Supermicro Super Server/H12SSL-i, BIOS 2.5 09/08/2022
RIP: 0010:__sev_platform_shutdown_locked.cold+0x0/0x21 [ccp]
That rIP is:
00000000000006fd <__sev_platform_shutdown_locked.cold>:
6fd: 8b 13 mov (%rbx),%edx
6ff: 48 8b 7d 00 mov 0x0(%rbp),%rdi
703: 89 c1 mov %eax,%ecx
Code: 74 05 31 ff 41 89 3f 49 8b 3e 89 ea 48 c7 c6 a0 8e 54 a0 41 bf 92 ff ff ff e8 e5 2e 09 e1 c6 05 2a d4 38 00 01 e9 26 af ff ff <8b> 13 48 8b 7d 00 89 c1 48 c7 c6 18 90 54 a0 89 44 24 04 e8 c1 2e
RSP: 0018:ffffc90005467d00 EFLAGS: 00010282
RAX: 00000000ffffff92 RBX: 0000000000000000 RCX: 0000000000000000
^^^^^^^^^^^^^^^^
and %rbx is nice and clean.
Call Trace:
<TASK>
__sev_firmware_shutdown.isra.0
sev_dev_destroy
psp_dev_destroy
sp_destroy
pci_device_shutdown
device_shutdown
kernel_power_off
hibernate.cold
state_store
kernfs_fop_write_iter
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
Pass in a pointer to the function-local error var in the caller.
With that addressed, suspending the ccp shows the error properly at
least:
ccp 0000:47:00.1: sev command 0x2 timed out, disabling PSP
ccp 0000:47:00.1: SEV: failed to SHUTDOWN error 0x0, rc -110
SEV-SNP: Leaking PFN range 0x146800-0x146a00
SEV-SNP: PFN 0x146800 unassigned, dumping non-zero entries in 2M PFN region: [0x146800 - 0x146a00]
...
ccp 0000:47:00.1: SEV-SNP firmware shutdown failed, rc -16, error 0x0
ACPI: PM: Preparing to enter system sleep state S5
kvm: exiting hardware virtualization
reboot: Power down
Btw, this driver is crying to be cleaned up to pass in a proper I/O
struct which can be used to store information between the different
functions, otherwise stuff like that will happen in the future again. |
| A NULL pointer dereference in the MMS Write Named Variable List handler, which may allow a network adjacent attacker to crash the server by sending a WriteRequest with an empty listOfData field. |
| Null pointer dereference when composing from a specially crafted draft message in Mutt >1.5.2 <2.2.12 |
| Null pointer dereference when viewing a specially crafted email in Mutt >1.5.2 <2.2.12 |
| Capstone is a disassembly framework. Versions prior to 6.0.0-Alpha8 and 5.0.8 have a NULL pointer dereference in `modRMRequired()` and `decode()` when disassembling 3DNow! opcodes (`0F 0F`) in builds compiled with `-DCAPSTONE_X86_REDUCE`, allowing a remote attacker to crash any application using the reduced X86 Capstone library by supplying a crafted input containing the 4-byte sequence `0F 0F <modrm> <imm8>`. Versions 6.0.0-Alpha8 and 5.0.8 patch the issue. |
| A vulnerability exists in the Health & Safety (HS) application of NASA's Core Flight System (cFS). The flaw allows the application to crash via segmentation fault when processing a routine Housekeeping Telemetry request, leading to denial of service. |
| A MongoDB server initiating an outbound TLS connection may terminate abnormally when processing a malformed OCSP response from a remote peer during the TLS handshake. OCSP stapling validation is enabled by default for outgoing TLS connections. Affected scenarios require the remote peer to hold a certificate issued by the cluster's trusted certificate authority, or for the connection to traverse an untrusted network path. |
| A user with read-only privileges is able to craft an aggregation pipeline using the $linearFill window function operator with a specific sortBy expression type to cause the mongod process to terminate abnormally, resulting in denial of service. The issue stems from insufficient validation of sort specifications during execution. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: 2D). Supported versions that are affected are Oracle Java SE: 8u491, 8u491-perf, 11.0.31, 17.0.19, 21.0.11, 25.0.3, 26.0.1; Oracle GraalVM for JDK: 17.0.19 and 21.0.11; Oracle GraalVM Enterprise Edition: 21.3.18. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 3.7 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| The MCTP-over-I2C+GPIO target binding in Zephyr (subsys/pmci/mctp/mctp_i2c_gpio_target.c) processes pseudo-register writes from an I2C bus master byte-by-byte in mctp_i2c_gpio_target_write_received() without validating the order or the receive buffer. In the affected versions the MCTP_I2C_GPIO_RX_MSG_ADDR (data) handler dereferences and writes through b->rx_pkt without checking that the receive buffer was allocated: a controller that selects the data register and writes a byte without first sending the length register (which is what allocates the buffer) causes a write of an attacker-chosen byte through a NULL/unallocated mctp_pktbuf pointer (i.e. into a small attacker-advanceable offset above address 0), producing memory corruption or a hard fault.
The same handler also performs a write-then-check bounds test, allowing a one-byte heap overflow at data[255] when more than 255 data bytes are sent.
Because the I2C target callback is invoked with raw bytes supplied by whatever device is the bus master and the binding performs no authentication, a malicious or malfunctioning controller on the bus can trigger these without any prior protocol state, leading to memory corruption and/or denial of service on the target device.
The vulnerable code was introduced when the I2C+GPIO target binding was added and shipped in Zephyr v4.3.0 and v4.4.0. The fix defers allocation to the first data byte with a NULL check, treats a missing length as a zero-sized packet rejected by libmctp, and moves the bounds check before the store. |
| Invalid pointer in the DOM: Bindings (WebIDL) component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix NULL pointer bug in svm_range_set_attr
The process_info could be NULL if user doesn't call kfd_ioctl_acquire_vm
before calling kfd_ioctl_svm.
(cherry picked from commit 83a26c812e0529eb040d31a76f73e33e637243d4) |
| In nanomq versions 0.24.11 and earlier, a NULL pointer dereference in `properties_parse()` allows an authenticated attacker to crash the NanoMQ broker by sending a POST request to `/api/v4/mqtt/publish` with `user_properties` as a JSON array instead of a JSON object. The crash occurs because `strlen()` is called on a NULL `item->string` pointer when iterating over array elements. An authenticated attacker can exploit this to crash the NanoMQ broker process. This is patched in version 0.24.14. |
| In nanomq versions 0.24.11 and earlier, a NULL pointer dereference in `nni_mqttv5_msg_decode_connect()` allows a malicious MQTT broker to crash any connecting NanoMQ MQTTv5 client (including bridge mode) with a single packet, causing remote denial of service via SIGSEGV. In `nni_mqttv5_msg_decode_connect()` (`mqtt_codec.c:1863`), the code iterates over CONNECT properties using variable `prop` when it should use `will_prop`. When a CONNECT packet has no connect-level properties (`prop == NULL`) but has will properties (`will_prop != NULL`), dereferencing `prop->next` causes SIGSEGV at address `0x38` (NULL + `offsetof(property, next)`).
This affects both `nanomq_cli` and **NanoMQ bridge mode** (Core component), as both use the same `mqtt_client.c` receive path. This can lead to remote DoS if a malicious MQTT broker can crash the client process with a single 35-byte packet and persistent DoS if auto-reconnect causes infinite crash loop. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: nx - fix nx_crypto_ctx_exit argument
nx_crypto_ctx_shash_exit calls nx_crypto_ctx_exit with crypto_shash_ctx(...)
but crypto_shash_ctx gives a nx_crypto_ctx *, not a crypto_tfm *.
Fix the type in nx_crypto_ctx_exit and drop the bogus crypto_tfm_ctx
call.
This fixes the following oops:
BUG: Unable to handle kernel data access at 0xc0403effffffffc8
Faulting instruction address: 0xc000000000396cb4
Oops: Kernel access of bad area, sig: 11 [#15]
Call Trace:
nx_crypto_ctx_shash_exit+0x24/0x60
crypto_shash_exit_tfm+0x28/0x40
crypto_destroy_tfm+0x98/0x140
crypto_exit_ahash_using_shash+0x20/0x40
crypto_destroy_tfm+0x98/0x140
hash_release+0x1c/0x30
alg_sock_destruct+0x38/0x60
__sk_destruct+0x48/0x2b0
af_alg_release+0x58/0xb0
__sock_release+0x68/0x150
sock_close+0x20/0x40
__fput+0x110/0x3a0
sys_close+0x48/0xa0
system_call_exception+0x140/0x2d0
system_call_common+0xf4/0x258
.. which came from hardlink(1) opportunistically using AF_ALG.
The same problem exists with nx_crypto_ctx_skcipher_exit getting a context
it wasn't expecting, but apparently nobody hit that for years. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr
nfs4_decode_mp_ds_addr() decodes the r_netid and r_addr opaques of a
netaddr4 from a GETDEVICEINFO multipath-DS body, then immediately
calls strrchr(buf, '.') to locate the port separator. Both decodes
use xdr_stream_decode_string_dup(), and the current code checks only
"nlen < 0" / "rlen < 0" before dereferencing the returned string.
When the on-wire opaque has length zero, xdr_stream_decode_opaque_inline()
returns 0 and xdr_stream_decode_string_dup() falls through to its
"*str = NULL; return ret" tail, leaving buf NULL with a return value
of 0. The "< 0" check does not catch this, and the next line is
strrchr(NULL, '.'), a kernel NULL pointer dereference reachable from
any pNFS-flexfile client mounted against a malicious or compromised
metadata server.
Reject the zero-length cases explicitly so the decoder fails with
-EBADMSG (treated as a malformed GETDEVICEINFO body) instead of
panicking the client. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reject non-VALID session in compound request branch
smb2_check_user_session() takes a shortcut for any operation that is not
the first in a COMPOUND request: it reuses work->sess (the session bound by
the first operation) and validates only the SessionId, then returns
"valid". It never re-checks work->sess->state == SMB2_SESSION_VALID, and a
SessionId of 0xFFFFFFFFFFFFFFFF (ULLONG_MAX, the MS-SMB2 related-operation
value) skips even the id comparison. The standalone path
(ksmbd_session_lookup_all() plus the SESSION_SETUP state machine) does
enforce the VALID state; the compound branch bypasses all of it.
A SESSION_SETUP carrying only an NTLM Type-1 (NtLmNegotiate) blob publishes
a fresh SMB2_SESSION_IN_PROGRESS session whose sess->user is still NULL
(->user is assigned later, by ntlm_authenticate()). Used as operation 1 of
a COMPOUND with operation 2 = TREE_CONNECT (related, SessionId=ULLONG_MAX,
\\host\IPC$), the tree-connect then runs on that IN_PROGRESS session and
reaches ksmbd_ipc_tree_connect_request(), which dereferences
user_name(sess->user) with sess->user == NULL (transport_ipc.c:687/701/704)
-> remote NULL-pointer dereference and a kernel Oops that wedges the ksmbd
worker for all clients.
Reject any non-first compound operation that lands on a session which is
not SMB2_SESSION_VALID, mirroring the validity the standalone lookup path
enforces. SESSION_SETUP itself legitimately runs on an IN_PROGRESS session,
but it is never carried as a non-first compound operation, so multi-leg
authentication is unaffected by this check. |
