| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs()
In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is
insufficient. It allows iteration to continue even if the remaining
src_size is too small to contain a complete smb2_ea_info structure.
Consequently, reads of ea_name_length and ea_value_length can occur
out-of-bounds.
Fix this by ensuring src_size >= sizeof(*src) before attempting to read
any structure fields. Additionally, reject any next_entry_offset that is
smaller than sizeof(*src) or that would advance the pointer beyond the
available buffer.
Note that for calls where the server returns a malformed EA list, the
error returned to userspace changes from -ENODATA (getxattr) or
-ERANGE (listxattr) to -EIO. This correctly signals a server protocol
error rather than misleadingly indicating "attribute not present" or
"output buffer too small". |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential OOB read in smb3_enum_snapshots()
If snapshot_array_size is smaller than GMT_TOKEN_SIZE,
smb3_enum_snapshots() sets ret_data_len to
sizeof(struct smb_snapshot_array) without verifying the actual length
of the server's reply.
Because SMB2_ioctl() places no lower bound on the server-supplied
OutputCount and allocates retbuf to exactly that length, a short reply
results in ret_data_len exceeding the size of retbuf. The subsequent
copy_to_user() then reads past the end of retbuf, leaking adjacent slab
memory to userspace. The subsequent clamp check is ineffective as it
only reduces ret_data_len.
Fix this by rejecting replies shorter than
sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set
to the 12-byte struct size rather than the 16-byte
MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes
is exactly what copy_to_user() attempts to read. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: RISC-V: store available counter mask as bitmap
The available-counter mask was a single unsigned long, but iteration
uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object.
Filling with an unsigned-long bit at index 32 and above is also wrong.
Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word
into CFG_MATCH when checking events, when allocating an index, and when
stopping all counters. Set the counter base to i times BITS_PER_LONG.
Share the CFG_MATCH ecall through a small helper so the 32-bit argument
split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits
above XLEN set, so the first word alone is not enough.
[pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
The FC BSG transport allocates job->request via memdup_user() using the
exact user-supplied request_len. For FC_BSG_HST_VENDOR,
fc_bsg_host_dispatch() only guarantees request_len covers msgcode and
vendor_id; it does not account for the vendor_cmd[] flexible array.
qla2xxx then reads the command selector vendor_cmd[0] and, in several
sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor
command area without verifying request_len. A caller holding
CAP_SYS_RAWIO can submit a short request whose vendor_id matches the
host, triggering out-of-bounds heap reads (KASAN-detectable, and able to
mis-select a command or panic).
Add a central guard in qla2x00_process_vendor_specific() so the selector
is always in bounds, restrict the early vendor_cmd[0] read in
qla24xx_bsg_request() to sufficiently long vendor messages, and add
request_len checks to the sub-handlers that read further:
qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(),
qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(),
qla2x00_update_optrom(), qlafx00_mgmt_cmd() and
qla28xx_validate_flash_image(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: phy: check length before parsing PHY status IE
Hardware might report PHY status IE with unexpected length, and parser
might access out of range. Check the length ahead. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: validate TX_CMD response layout
TX_CMD parsing uses frame_count to walk status entries and then
read the trailing SCD SSN. Make the minimum-length check follow
that exact runtime layout calculation before parsing the payload.
For new TX API, reject TX_CMD responses with frame_count != 1 and
warn/return in the aggregation handler to document that aggregated
accounting is expected via BA notifications. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: add a check on the tid coming from the firmware
ba_notif->tid is a firmware-controlled u8 that is used directly
as an array index into tid_data[] without any validation. Add a
bounds check against IWL_MAX_TID_COUNT before dereferencing the
array. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3
The changes introduced to handle single power domain platforms have
swapped the info pointer increment from num_pd_vregs to num_pds, which
would shift the info pointer past the end of the array for pronto-v3,
which does not list power domain regulators in vregs.
This showed up as a difference between GCC- and LLVM-compiled kernels
on SDM632 devices, where only with LLVM one would get the
"regulator request with no identifier" error, because the out-of-bounds
memory ended up being zeroed. Fix by skipping the increment when there
are more power domains than regulators. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Validate string descriptors
The string descriptor length includes a two-byte header while the UTF-16
payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code
units, not bytes. Passing the payload byte count can make it read beyond
the descriptor buffer.
Validate that the payload has an even byte count, pass a code-unit count to
the converter, and allocate sufficient UTF-8 output space.
The raw string buffer starts after the descriptor header but its size is
bLength. Copying bLength bytes from that pointer can read beyond the
response buffer.
Allocate a zeroed bLength-sized buffer and copy only the UTF-16
payload. This preserves the raw buffer size consumed by the RPMB device-ID
ABI while avoiding the overread. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event()
There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so
the parse infrastructure does not enforce a minimum length for the event
struct. Additionally, the num_vdevs field is taken directly from firmware
and used as a loop bound over the vdev_ids array without checking that it
fits within the TLV payload. Either condition can cause an out-of-bounds
read.
Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so
the parse infrastructure enforces a minimum length for the fixed-size event
struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload
length of a parsed TLV from the header preceding its data pointer. Use it
in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before
the loop.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user()
ksmbd_alloc_user() copies resp->hash_sz bytes out of the mountd IPC
login response with
user->passkey_sz = resp->hash_sz;
user->passkey = kmalloc(resp->hash_sz, KSMBD_DEFAULT_GFP);
if (user->passkey)
memcpy(user->passkey, resp->hash, resp->hash_sz);
resp->hash_sz is a __u16 supplied by the response, but resp->hash[] is
only KSMBD_REQ_MAX_HASH_SZ bytes. A malformed or malicious login
response can set hash_sz well beyond that (up to 65535), so the memcpy()
reads past the end of the response object. ipc_validate_msg() does not
bound hash_sz, so reject any response whose hash_sz exceeds the on-stack
hash[] buffer before allocating and copying.
[ 2030.238706] BUG: KASAN: slab-out-of-bounds in ksmbd_alloc_user+0x278/0x680
[ 2030.240549] Read of size 65535 at addr ffff888121bb6680 by task kworker/4:1/18611
[ 2030.242296]
[ 2030.242710] CPU: 4 UID: 0 PID: 18611 Comm: kworker/4:1 Not tainted 7.1.0-next-20260623-virtme #96 PREEMPT(lazy)
[ 2030.242732] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 2030.242743] Workqueue: ksmbd-io handle_ksmbd_work
[ 2030.242763] Call Trace:
[ 2030.242769] <TASK>
[ 2030.242776] dump_stack_lvl+0xa2/0xd0
[ 2030.242794] print_address_description+0x77/0x200
[ 2030.242815] ? ksmbd_alloc_user+0x278/0x680
[ 2030.242831] print_report+0x58/0x70
[ 2030.242848] kasan_report+0x117/0x150
[ 2030.242869] ? ksmbd_alloc_user+0x278/0x680
[ 2030.242888] kasan_check_range+0x3c7/0x3f0
[ 2030.242908] ? ksmbd_alloc_user+0x278/0x680
[ 2030.242925] __asan_memcpy+0x29/0x70
[ 2030.242942] ksmbd_alloc_user+0x278/0x680
[ 2030.242960] ksmbd_login_user+0xc3/0x120
[ 2030.242978] ntlm_authenticate+0x5e6/0x1b00
[ 2030.243017] ? __pfx_ntlm_authenticate+0x10/0x10
[ 2030.243035] ? ksmbd_session_lookup+0x188/0x1d0
[ 2030.243054] ? __pfx_ksmbd_session_lookup+0x10/0x10
[ 2030.243090] ? __sanitizer_cov_trace_switch+0x7b/0x140
[ 2030.243108] smb2_sess_setup+0x1e4a/0x27b0
[ 2030.243126] ? copy_from_kernel_nofault+0x199/0x300
[ 2030.243156] ? __pfx_smb2_sess_setup+0x10/0x10
[ 2030.243173] ? get_smb2_cmd_val+0xe3/0x1c0
[ 2030.243208] handle_ksmbd_work+0x954/0x1280
[ 2030.243230] ? __pfx_handle_ksmbd_work+0x10/0x10
[ 2030.243249] ? process_scheduled_works+0xa07/0x1490
[ 2030.243270] ? process_scheduled_works+0xa07/0x1490
[ 2030.243291] process_scheduled_works+0xa70/0x1490
[ 2030.243320] ? __pfx_process_scheduled_works+0x10/0x10
[ 2030.243340] ? do_raw_spin_lock+0x130/0x300
[ 2030.243358] ? lock_is_held_type+0x7b/0x110
[ 2030.243388] worker_thread+0x932/0xe20
[ 2030.243415] kthread+0x38a/0x470
[ 2030.243431] ? __pfx_worker_thread+0x10/0x10
[ 2030.243451] ? __pfx_kthread+0x10/0x10
[ 2030.243467] ret_from_fork+0x484/0x910
[ 2030.243485] ? __pfx_ret_from_fork+0x10/0x10
[ 2030.243501] ? __switch_to+0xc77/0x12c0
[ 2030.243523] ? __pfx_kthread+0x10/0x10
[ 2030.243540] ret_from_fork_asm+0x1a/0x30
[ 2030.243564] </TASK>
[ 2030.243570]
[ 2030.290164] Allocated by task 19279:
[ 2030.290911] kasan_save_track+0x3e/0x80
[ 2030.292179] __kasan_kmalloc+0x72/0x90
[ 2030.293217] __kvmalloc_node_noprof+0x3ff/0x6b0
[ 2030.294467] handle_generic_event+0x59b/0x750
[ 2030.295345] genl_family_rcv_msg_doit+0x238/0x340
[ 2030.296553] genl_rcv_msg+0x606/0x7b0
[ 2030.297129] netlink_rcv_skb+0x22b/0x4a0
[ 2030.298500] genl_rcv+0x2d/0x40
[ 2030.299273] netlink_unicast+0x7ba/0x930
[ 2030.300019] netlink_sendmsg+0x8c3/0xb00
[ 2030.301073] __sock_sendmsg+0xec/0x140
[ 2030.301579] __sys_sendto+0x357/0x470
[ 2030.302255] __x64_sys_sendto+0xe3/0x100
[ 2030.303425] do_syscall_64+0x135/0x460
[ 2030.304763] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2030.305594]
[ 2030.305819] The buggy address belongs to the object at ffff888121bb6640
[ 2030.305819] which belongs to the cache kmalloc-192 of size 192
[ 2030.309595] The buggy address
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size
smb_check_perm_dacl() validates that the DACL fits inside the NT
security descriptor, but then bounds its two ACE walks by the
remaining NTSD length (acl_size) rather than the DACL's declared
size (pdacl_size).
When pdacl->size is smaller than the trailing NTSD buffer, bytes
after the declared DACL boundary - still inside the stored security
descriptor - are parsed as ACEs during access checks. A crafted
DACL can place an access-granting ACE beyond pdacl->size, and the
current code accepts it during SMB2_CREATE access validation, while
parse_dacl() and smb_inherit_dacl() stop at pdacl_size.
Bound both ACE walks by pdacl_size to match the DACL boundary
semantics used elsewhere in the server.
Validation:
- semantic KUnit harness shows the post-boundary ACE is selected
before the fix and rejected (EACCES) after it
- linux master (7.2-rc6), x86_64 |
| In the Linux kernel, the following vulnerability has been resolved:
net: qlcnic: validate unified ROM sections before loading
The unified ROM parser reads directory, product, and data-descriptor fields
from the firmware file. Existing validation forms table and data ends with
unchecked additions and multiplications. Malformed values can wrap before
they are compared with the firmware size. The parser also dereferences
typed pointers at firmware-controlled offsets.
Valid descriptor extents alone are insufficient for the consumers. The
loader reads a fixed-size bootloader regardless of its declared size, the
version parser assumes a 17-byte tail, and a partial final firmware word is
read as a full u64. A truncated image can therefore make the driver read
beyond the firmware allocation during validation or loading.
Replace the pointer-returning parser with bounded range helpers. Validate
table entry sizes, descriptor indices, section ranges, the fixed
bootloader load length, and the version tail before exposing any section.
Read all file fields with unaligned little-endian accessors and assemble a
partial final word from only the bytes that remain. Apply the same range
checks to the legacy image before reading its fixed fields. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: bound num_export_targets array for mds info v2/v3
ceph_mdsmap_decode() in fs/ceph/mdsmap.c reads num_export_targets from
each per-mds info record and advances the decode cursor by
num_export_targets * sizeof(u32) without first checking that many bytes
remain. The only upper-bound check that catches a runaway cursor
(*p > info_end) is gated on info_v >= 4, because info_end is left NULL
for info_v 2 and 3. When the monitor sends an MDS map whose per-mds
info version is 2 or 3 with an oversized num_export_targets, the cursor
moves past the message front buffer and the later export-targets loop
calls the unchecked ceph_decode_32() on out-of-bounds memory.
A kernel client processes CEPH_MSG_MDS_MAP from its monitor session
(net/ceph/mon_client.c dispatches it; fs/ceph/super.c routes it to
ceph_mdsc_handle_mdsmap(), which sets end to the front buffer bound and
calls ceph_mdsmap_decode()). A malicious or compromised monitor, or an
on-path attacker on an unsigned/unencrypted messenger session, can
therefore drive an out-of-bounds read in the client kernel; on x86_64
with KASAN it is reported as a slab-out-of-bounds read in
ceph_mdsmap_decode(). The decoded values land in the internal
info->export_targets[] array, so the consequence is a kernel
out-of-bounds read, not an information leak to the attacker.
Impact: a malicious or compromised Ceph monitor sending an MDS map with
a per-mds info version of 2 or 3 and an oversized num_export_targets
field triggers an out-of-bounds read in the CephFS client kernel.
Add a ceph_decode_need() for the export-targets array before advancing
the cursor, so the bound is enforced for every info_v >= 2, not only
info_v >= 4. This mirrors the count-then-need idiom already used for
m_data_pg_pools later in the same function.
Compute the export-targets byte count with size_mul() and reuse that
checked length when advancing the cursor, so the attacker-controlled
num_export_targets multiplication fails closed on overflow rather than
relying on the later kcalloc() guard. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2()
coalesce_t2() computes data pointers directly from server-supplied
DataOffset fields with no validation against buffer bounds:
data_area_of_tgt = (char *)&pSMBt->hdr.Protocol +
get_unaligned_le16(&pSMBt->t2_rsp.DataOffset);
data_area_of_src = (char *)&pSMBs->hdr.Protocol +
get_unaligned_le16(&pSMBs->t2_rsp.DataOffset);
data_area_of_tgt += total_in_tgt;
...
memcpy(data_area_of_tgt, data_area_of_src, total_in_src);
A small DataOffset can push a pointer below the actual byte area,
overwriting header fields; a large one can push it past the buffer
end, causing out-of-bounds heap reads (source) or writes (target).
The BCC overflow guard does not prevent this: BCC reflects how much
data is present, while DataOffset controls where in the buffer it
starts.
The "validate target area" comment present since the function was
first written in 2005 was a placeholder that was never implemented.
Add lower- and upper-bound checks for both data pointers before the
memcpy, and before any target header fields are modified. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject a tree connect response whose byte count is too small
CIFSTCon() bounds its strnlen() over the byte area with the server's
ByteCount minus two, which for ByteCount 0 or 1 goes negative as an int
and converts to a huge size_t. The later subtraction wraps the __u16
bytes_left, and that is what bounds cifs_strndup_from_utf16(): a bound of
up to 65535 against a ~16 KB cifs_req_poolp object runs off the end of the
slab object, and the bytes reach userspace through tcon->nativeFileSystem
in /proc/fs/cifs/DebugData.
Reject a byte area too small for what the parser consumes. Two bytes is
the least it can consume, and no conformant response carries fewer. The
new trace point is the 129th smb_eio_trace entry, which __mode(byte)
cannot represent, so the attribute goes with it. |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: validate array block headers on read
array_block_check() validates blocknr and csum and nothing else, while
node_check(), next to it, has bounded the structural fields since both
were written. dm_array_cursor_next() takes its loop bound from the
on-disk nr_entries and element_at() is unguarded pointer arithmetic, so
a count larger than the block holds keeps the cursor in one block while
the index grows past it and the read walks off the dm-bufio buffer --
dm_cache_load_mappings() drives it once per cache block at activation.
Check the header against itself: reject a zero value_size, require
max_entries to equal calc_max_entries() for that value_size and block
size, and require nr_entries to fit. Equality rather than an upper bound,
since a count below the real capacity trips BUG_ON() in fill_ablock() and
trim_ablock(). Metadata dm-array writes satisfies all three. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Reject short RFC 4121 MIC tokens in gss_krb5_verify_mic_v2
gss_krb5_verify_mic_v2() reads the token ID at ptr[0..1], the flags
byte at ptr[2], and padding at ptr[3..7], then passes
ptr + GSS_KRB5_TOK_HDR_LEN and cksum_len to gss_krb5_mic_build_sg().
None of these accesses check read_token->len first.
The minimum safe token size is GSS_KRB5_TOK_HDR_LEN (16) plus
ctx->krb5e->cksum_len (12-24, depending on the enctype). All callers
accept shorter tokens from the wire:
- gss_unwrap_resp_integ() enforces only an upper bound
(offset + len <= rcv_buf->len) before allocating
mic.data = kmalloc(len) and passing it to gss_verify_mic().
A malicious NFS server can therefore supply a short checksum
opaque, producing a small slab allocation that the Kerberos MIC
verifier reads past.
- gss_validate() enforces only len <= RPC_MAX_AUTH_SIZE (400)
before passing the wire-supplied length to
gss_validate_seqno_mic(), which constructs a mic xdr_netobj
and calls gss_verify_mic().
- svcauth_gss_verify_header() enforces only
checksum.len >= XDR_UNIT (4 bytes) before dispatching to
gss_verify_mic().
- svcauth_gss_unwrap_integ() checks only that the checksum fits
in gsd->gsd_scratch.
Add a length guard at the top of gss_krb5_verify_mic_v2(), before any
ptr[] access or scatterlist construction. Well-formed MIC tokens from
gss_krb5_get_mic_v2() already have exactly GSS_KRB5_TOK_HDR_LEN +
cksum_len bytes, so valid traffic is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Validate Read chunk positions before reconstruction
The RPC/RDMA Read chunk position field is supplied by the remote
client and stored verbatim in the parsed chunk list.
xdr_count_read_segments() checks only 4-byte alignment; it never
compares the position against the received inline body length.
In the single-chunk path, svc_rdma_read_complete_one() splits the
head and tail kvecs at ch_position. A position past the inline
body underflows the tail length, exposing adjacent slab memory to
the upper XDR decoder.
In the multi-chunk path, svc_rdma_read_multiple_chunks() computes
gap lengths between chunks as unsigned subtractions from
ch_position. Overlapping Read chunks cause these subtractions to
underflow. A final position past the inline body likewise
underflows the trailing gap length. svc_rdma_copy_inline_range()
then copies past the receive buffer into request pages that are
returned to the client through the Reply channel.
Bound inline-range copies in svc_rdma_copy_inline_range() against
the decoded inline RPC body saved in rc_saved_arg. Reject a
single Read chunk positioned beyond that body, and reject
multi-chunk lists where accumulated read bytes exceed the next
chunk's position. Apply the same position and overlap checks in
the call-chunk interleaving path. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate directory-index entry counts when reading metadata
ocfs2_validate_dx_leaf() and ocfs2_validate_dx_root() check the ECC and
signature of an indexed-directory block before it reaches higher-level
callers, but neither validator bounds the ocfs2_dx_entry_list counts
against the capacity of the block that holds them.
ocfs2_dx_dir_search() then walks
for (i = 0; i < le16_to_cpu(entry_list->de_num_used); i++)
dx_entry = &entry_list->de_entries[i];
over de_num_used entries with no bounds check. entry_list is either
dx_leaf->dl_list (from ocfs2_read_dx_leaf) or, for an inline root,
dx_root->dr_entries. A crafted on-disk image can set de_num_used (and
de_count, which is the __counted_by_le() bound of de_entries) to 0xffff
and make the walk read far past the end of the 4KB metadata block, giving
a slab out-of-bounds read reachable from any path lookup, stat() or open()
on an indexed directory once the image is mounted.
Commit 775c17386a6f ("ocfs2: validate dx_root extent list fields during
block read") already bounds dr_list for the non-inline dx_root, but left
the inline dr_entries path and the dx_leaf dl_list unchecked. Add the
same read-time validation for both entry lists: de_count must equal the
capacity of the block (ocfs2_dx_entries_per_leaf()/per_root()) and
de_num_used must not exceed de_count, rejecting corrupted metadata with
-EFSCORRUPTED before ocfs2_dx_dir_search() can walk an out-of-range entry
array.
de_count is always written as exactly the block capacity when a leaf or
inline root is formatted, so the equality check does not reject any valid
image.
Found by 0sec automated security-research tooling (https://0sec.ai). |
