| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: wcd-mbhc-v2: fix resource leaks on component remove
The MBHC resources must be released on component probe failure and
removal so can not be tied to the lifetime of the component device.
This is specifically needed to allow probe deferrals of the sound card
which otherwise fails when reprobing the codec component:
snd-sc8280xp sound: ASoC: failed to instantiate card -517
genirq: Flags mismatch irq 299. 00002001 (mbhc sw intr) vs. 00002001 (mbhc sw intr)
wcd938x_codec audio-codec: Failed to request mbhc interrupts -16
wcd938x_codec audio-codec: mbhc initialization failed
wcd938x_codec audio-codec: ASoC: error at snd_soc_component_probe on audio-codec: -16
snd-sc8280xp sound: ASoC: failed to instantiate card -16 |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: report devlink_port_type_warn source device
devlink_port_type_warn is scheduled for port devlink and warning
when the port type is not set. But from this warning it is not easy
found out which device (driver) has no devlink port set.
[ 3709.975552] Type was not set for devlink port.
[ 3709.975579] WARNING: CPU: 1 PID: 13092 at net/devlink/leftover.c:6775 devlink_port_type_warn+0x11/0x20
[ 3709.993967] Modules linked in: openvswitch nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nfnetlink bluetooth rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs vhost_net vhost vhost_iotlb tap tun bridge stp llc qrtr intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm x86_pkg_temp_thermal mlx5_ib intel_powerclamp coretemp dell_wmi ledtrig_audio sparse_keymap ipmi_ssif kvm_intel ib_uverbs rfkill ib_core video kvm iTCO_wdt acpi_ipmi intel_vsec irqbypass ipmi_si iTCO_vendor_support dcdbas ipmi_devintf mei_me ipmi_msghandler rapl mei intel_cstate isst_if_mmio isst_if_mbox_pci dell_smbios intel_uncore isst_if_common i2c_i801 dell_wmi_descriptor wmi_bmof i2c_smbus intel_pch_thermal pcspkr acpi_power_meter xfs libcrc32c sd_mod sg nvme_tcp mgag200 i2c_algo_bit nvme_fabrics drm_shmem_helper drm_kms_helper nvme syscopyarea ahci sysfillrect sysimgblt nvme_core fb_sys_fops crct10dif_pclmul libahci mlx5_core sfc crc32_pclmul nvme_common drm
[ 3709.994030] crc32c_intel mtd t10_pi mlxfw libata tg3 mdio megaraid_sas psample ghash_clmulni_intel pci_hyperv_intf wmi dm_multipath sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse
[ 3710.108431] CPU: 1 PID: 13092 Comm: kworker/1:1 Kdump: loaded Not tainted 5.14.0-319.el9.x86_64 #1
[ 3710.108435] Hardware name: Dell Inc. PowerEdge R750/0PJ80M, BIOS 1.8.2 09/14/2022
[ 3710.108437] Workqueue: events devlink_port_type_warn
[ 3710.108440] RIP: 0010:devlink_port_type_warn+0x11/0x20
[ 3710.108443] Code: 84 76 fe ff ff 48 c7 03 20 0e 1a ad 31 c0 e9 96 fd ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 48 c7 c7 18 24 4e ad e8 ef 71 62 ff <0f> 0b c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f6 87
[ 3710.108445] RSP: 0018:ff3b6d2e8b3c7e90 EFLAGS: 00010282
[ 3710.108447] RAX: 0000000000000000 RBX: ff366d6580127080 RCX: 0000000000000027
[ 3710.108448] RDX: 0000000000000027 RSI: 00000000ffff86de RDI: ff366d753f41f8c8
[ 3710.108449] RBP: ff366d658ff5a0c0 R08: ff366d753f41f8c0 R09: ff3b6d2e8b3c7e18
[ 3710.108450] R10: 0000000000000001 R11: 0000000000000023 R12: ff366d753f430600
[ 3710.108451] R13: ff366d753f436900 R14: 0000000000000000 R15: ff366d753f436905
[ 3710.108452] FS: 0000000000000000(0000) GS:ff366d753f400000(0000) knlGS:0000000000000000
[ 3710.108453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3710.108454] CR2: 00007f1c57bc74e0 CR3: 000000111d26a001 CR4: 0000000000773ee0
[ 3710.108456] PKRU: 55555554
[ 3710.108457] Call Trace:
[ 3710.108458] <TASK>
[ 3710.108459] process_one_work+0x1e2/0x3b0
[ 3710.108466] ? rescuer_thread+0x390/0x390
[ 3710.108468] worker_thread+0x50/0x3a0
[ 3710.108471] ? rescuer_thread+0x390/0x390
[ 3710.108473] kthread+0xdd/0x100
[ 3710.108477] ? kthread_complete_and_exit+0x20/0x20
[ 3710.108479] ret_from_fork+0x1f/0x30
[ 3710.108485] </TASK>
[ 3710.108486] ---[ end trace 1b4b23cd0c65d6a0 ]---
After patch:
[ 402.473064] ice 0000:41:00.0: Type was not set for devlink port.
[ 402.473064] ice 0000:41:00.1: Type was not set for devlink port. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix oops in xe_gem_fault when running core_hotunplug test.
I saw an oops in xe_gem_fault when running the xe-fast-feedback
testlist against the realtime kernel without debug options enabled.
The panic happens after core_hotunplug unbind-rebind finishes.
Presumably what happens is that a process mmaps, unlocks because
of the FAULT_FLAG_RETRY_NOWAIT logic, has no process memory left,
causing ttm_bo_vm_dummy_page() to return VM_FAULT_NOPAGE, since
there was nothing left to populate, and then oopses in
"mem_type_is_vram(tbo->resource->mem_type)" because tbo->resource
is NULL.
It's convoluted, but fits the data and explains the oops after
the test exits. |
| In the Linux kernel, the following vulnerability has been resolved:
dccp: fix data-race around dp->dccps_mss_cache
dccp_sendmsg() reads dp->dccps_mss_cache before locking the socket.
Same thing in do_dccp_getsockopt().
Add READ_ONCE()/WRITE_ONCE() annotations,
and change dccp_sendmsg() to check again dccps_mss_cache
after socket is locked. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: fix NULL-deref on snapshot tear down
In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.
Patchwork: https://patchwork.freedesktop.org/patch/525099/ |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ina2xx: avoid NULL pointer dereference on OF device match
The affected lines were resulting in a NULL pointer dereference on our
platform because the device tree contained the following list of
compatible strings:
power-sensor@40 {
compatible = "ti,ina232", "ti,ina231";
...
};
Since the driver doesn't declare a compatible string "ti,ina232", the OF
matching succeeds on "ti,ina231". But the I2C device ID info is
populated via the first compatible string, cf. modalias population in
of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy
I2C device ID table either, the struct i2c_device_id *id pointer in the
probe function is NULL.
Fix this by using the already populated type variable instead, which
points to the proper driver data. Since the name is also wanted, add a
generic one to the ina2xx_config table. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix NULL ptr deref by checking new_crtc_state
intel_atomic_get_new_crtc_state can return NULL, unless crtc state wasn't
obtained previously with intel_atomic_get_crtc_state, so we must check it
for NULLness here, just as in many other places, where we can't guarantee
that intel_atomic_get_crtc_state was called.
We are currently getting NULL ptr deref because of that, so this fix was
confirmed to help.
(cherry picked from commit 1d5b09f8daf859247a1ea65b0d732a24d88980d8) |
| Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: use kvmalloc_array/kvfree instead of kmalloc_array/kfree
The call stack shown below is a scenario in the Linux 4.19 kernel.
Allocating memory failed where exfat fs use kmalloc_array due to
system memory fragmentation, while the u-disk was inserted without
recognition.
Devices such as u-disk using the exfat file system are pluggable and
may be insert into the system at any time.
However, long-term running systems cannot guarantee the continuity of
physical memory. Therefore, it's necessary to address this issue.
Binder:2632_6: page allocation failure: order:4,
mode:0x6040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null)
Call trace:
[242178.097582] dump_backtrace+0x0/0x4
[242178.097589] dump_stack+0xf4/0x134
[242178.097598] warn_alloc+0xd8/0x144
[242178.097603] __alloc_pages_nodemask+0x1364/0x1384
[242178.097608] kmalloc_order+0x2c/0x510
[242178.097612] kmalloc_order_trace+0x40/0x16c
[242178.097618] __kmalloc+0x360/0x408
[242178.097624] load_alloc_bitmap+0x160/0x284
[242178.097628] exfat_fill_super+0xa3c/0xe7c
[242178.097635] mount_bdev+0x2e8/0x3a0
[242178.097638] exfat_fs_mount+0x40/0x50
[242178.097643] mount_fs+0x138/0x2e8
[242178.097649] vfs_kern_mount+0x90/0x270
[242178.097655] do_mount+0x798/0x173c
[242178.097659] ksys_mount+0x114/0x1ac
[242178.097665] __arm64_sys_mount+0x24/0x34
[242178.097671] el0_svc_common+0xb8/0x1b8
[242178.097676] el0_svc_handler+0x74/0x90
[242178.097681] el0_svc+0x8/0x340
By analyzing the exfat code,we found that continuous physical memory
is not required here,so kvmalloc_array is used can solve this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work"
This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f.
This patch introduces a possible null-ptr-def problem. Revert it. And the
fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth:
btsdio: fix use after free bug in btsdio_remove due to race condition"). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup()
Fix the below kernel panic due to null pointer access:
[ 18.504431] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048
[ 18.513464] Mem abort info:
[ 18.516346] ESR = 0x0000000096000005
[ 18.520204] EC = 0x25: DABT (current EL), IL = 32 bits
[ 18.525706] SET = 0, FnV = 0
[ 18.528878] EA = 0, S1PTW = 0
[ 18.532117] FSC = 0x05: level 1 translation fault
[ 18.537138] Data abort info:
[ 18.540110] ISV = 0, ISS = 0x00000005
[ 18.544060] CM = 0, WnR = 0
[ 18.547109] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000112826000
[ 18.553738] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 18.562690] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
**Snip**
[ 18.696758] Call trace:
[ 18.699278] adreno_gpu_cleanup+0x30/0x88
[ 18.703396] a6xx_destroy+0xc0/0x130
[ 18.707066] a6xx_gpu_init+0x308/0x424
[ 18.710921] adreno_bind+0x178/0x288
[ 18.714590] component_bind_all+0xe0/0x214
[ 18.718797] msm_drm_bind+0x1d4/0x614
[ 18.722566] try_to_bring_up_aggregate_device+0x16c/0x1b8
[ 18.728105] __component_add+0xa0/0x158
[ 18.732048] component_add+0x20/0x2c
[ 18.735719] adreno_probe+0x40/0xc0
[ 18.739300] platform_probe+0xb4/0xd4
[ 18.743068] really_probe+0xfc/0x284
[ 18.746738] __driver_probe_device+0xc0/0xec
[ 18.751129] driver_probe_device+0x48/0x110
[ 18.755421] __device_attach_driver+0xa8/0xd0
[ 18.759900] bus_for_each_drv+0x90/0xdc
[ 18.763843] __device_attach+0xfc/0x174
[ 18.767786] device_initial_probe+0x20/0x2c
[ 18.772090] bus_probe_device+0x40/0xa0
[ 18.776032] deferred_probe_work_func+0x94/0xd0
[ 18.780686] process_one_work+0x190/0x3d0
[ 18.784805] worker_thread+0x280/0x3d4
[ 18.788659] kthread+0x104/0x1c0
[ 18.791981] ret_from_fork+0x10/0x20
[ 18.795654] Code: f9400408 aa0003f3 aa1f03f4 91142015 (f9402516)
[ 18.801913] ---[ end trace 0000000000000000 ]---
[ 18.809039] Kernel panic - not syncing: Oops: Fatal exception
Patchwork: https://patchwork.freedesktop.org/patch/515605/ |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: missing copy_finish in fuse-over-io-uring argument copies
Fix a possible reference count leak of payload pages during
fuse argument copies.
[Joanne: simplified error cleanup] |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix race between wbt_enable_default and IO submission
When wbt_enable_default() is moved out of queue freezing in elevator_change(),
it can cause the wbt inflight counter to become negative (-1), leading to hung
tasks in the writeback path. Tasks get stuck in wbt_wait() because the counter
is in an inconsistent state.
The issue occurs because wbt_enable_default() could race with IO submission,
allowing the counter to be decremented before proper initialization. This manifests
as:
rq_wait[0]:
inflight: -1
has_waiters: True
rwb_enabled() checks the state, which can be updated exactly between wbt_wait()
(rq_qos_throttle()) and wbt_track()(rq_qos_track()), then the inflight counter
will become negative.
And results in hung task warnings like:
task:kworker/u24:39 state:D stack:0 pid:14767
Call Trace:
rq_qos_wait+0xb4/0x150
wbt_wait+0xa9/0x100
__rq_qos_throttle+0x24/0x40
blk_mq_submit_bio+0x672/0x7b0
...
Fix this by:
1. Splitting wbt_enable_default() into:
- __wbt_enable_default(): Returns true if wbt_init() should be called
- wbt_enable_default(): Wrapper for existing callers (no init)
- wbt_init_enable_default(): New function that checks and inits WBT
2. Using wbt_init_enable_default() in blk_register_queue() to ensure
proper initialization during queue registration
3. Move wbt_init() out of wbt_enable_default() which is only for enabling
disabled wbt from bfq and iocost, and wbt_init() isn't needed. Then the
original lock warning can be avoided.
4. Removing the ELEVATOR_FLAG_ENABLE_WBT_ON_EXIT flag and its handling
code since it's no longer needed
This ensures WBT is properly initialized before any IO can be submitted,
preventing the counter from going negative. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: invalidate dentry cache on failed whiteout creation
F2FS can mount filesystems with corrupted directory depth values that
get runtime-clamped to MAX_DIR_HASH_DEPTH. When RENAME_WHITEOUT
operations are performed on such directories, f2fs_rename performs
directory modifications (updating target entry and deleting source
entry) before attempting to add the whiteout entry via f2fs_add_link.
If f2fs_add_link fails due to the corrupted directory structure, the
function returns an error to VFS, but the partial directory
modifications have already been committed to disk. VFS assumes the
entire rename operation failed and does not update the dentry cache,
leaving stale mappings.
In the error path, VFS does not call d_move() to update the dentry
cache. This results in new_dentry still pointing to the old inode
(new_inode) which has already had its i_nlink decremented to zero.
The stale cache causes subsequent operations to incorrectly reference
the freed inode.
This causes subsequent operations to use cached dentry information that
no longer matches the on-disk state. When a second rename targets the
same entry, VFS attempts to decrement i_nlink on the stale inode, which
may already have i_nlink=0, triggering a WARNING in drop_nlink().
Example sequence:
1. First rename (RENAME_WHITEOUT): file2 → file1
- f2fs updates file1 entry on disk (points to inode 8)
- f2fs deletes file2 entry on disk
- f2fs_add_link(whiteout) fails (corrupted directory)
- Returns error to VFS
- VFS does not call d_move() due to error
- VFS cache still has: file1 → inode 7 (stale!)
- inode 7 has i_nlink=0 (already decremented)
2. Second rename: file3 → file1
- VFS uses stale cache: file1 → inode 7
- Tries to drop_nlink on inode 7 (i_nlink already 0)
- WARNING in drop_nlink()
Fix this by explicitly invalidating old_dentry and new_dentry when
f2fs_add_link fails during whiteout creation. This forces VFS to
refresh from disk on subsequent operations, ensuring cache consistency
even when the rename partially succeeds.
Reproducer:
1. Mount F2FS image with corrupted i_current_depth
2. renameat2(file2, file1, RENAME_WHITEOUT)
3. renameat2(file3, file1, 0)
4. System triggers WARNING in drop_nlink() |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: set dummy blocksize to read boot_block when mounting
When mounting, sb->s_blocksize is used to read the boot_block without
being defined or validated. Set a dummy blocksize before attempting to
read the boot_block.
The issue can be triggered with the following syz reproducer:
mkdirat(0xffffffffffffff9c, &(0x7f0000000080)='./file1\x00', 0x0)
r4 = openat$nullb(0xffffffffffffff9c, &(0x7f0000000040), 0x121403, 0x0)
ioctl$FS_IOC_SETFLAGS(r4, 0x40081271, &(0x7f0000000980)=0x4000)
mount(&(0x7f0000000140)=@nullb, &(0x7f0000000040)='./cgroup\x00',
&(0x7f0000000000)='ntfs3\x00', 0x2208004, 0x0)
syz_clone(0x88200200, 0x0, 0x0, 0x0, 0x0, 0x0)
Here, the ioctl sets the bdev block size to 16384. During mount,
get_tree_bdev_flags() calls sb_set_blocksize(sb, block_size(bdev)),
but since block_size(bdev) > PAGE_SIZE, sb_set_blocksize() leaves
sb->s_blocksize at zero.
Later, ntfs_init_from_boot() attempts to read the boot_block while
sb->s_blocksize is still zero, which triggers the bug.
[almaz.alexandrovich@paragon-software.com: changed comment style, added
return value handling] |
| Improper check for unusual or exceptional conditions in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Improper initialization in the Linux kernel-mode driver for some Intel(R) I350 Series Ethernet before version 5.19.2 may allow an authenticated user to potentially enable Information disclosure via data exposure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend
sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini,
driver unconditionally disables ecc_irq which is only enabled on
those asics enabling sdma ecc. This will introduce a warning in
suspend cycle on those chips with sdma ip v4.0, while without
sdma ecc. So this patch correct this.
[ 7283.166354] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu]
[ 7283.167001] RSP: 0018:ffff9a5fc3967d08 EFLAGS: 00010246
[ 7283.167019] RAX: ffff98d88afd3770 RBX: 0000000000000001 RCX: 0000000000000000
[ 7283.167023] RDX: 0000000000000000 RSI: ffff98d89da30390 RDI: ffff98d89da20000
[ 7283.167025] RBP: ffff98d89da20000 R08: 0000000000036838 R09: 0000000000000006
[ 7283.167028] R10: ffffd5764243c008 R11: 0000000000000000 R12: ffff98d89da30390
[ 7283.167030] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105
[ 7283.167032] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000
[ 7283.167036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7283.167039] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0
[ 7283.167041] Call Trace:
[ 7283.167046] <TASK>
[ 7283.167048] sdma_v4_0_hw_fini+0x38/0xa0 [amdgpu]
[ 7283.167704] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu]
[ 7283.168296] amdgpu_device_suspend+0x103/0x180 [amdgpu]
[ 7283.168875] amdgpu_pmops_freeze+0x21/0x60 [amdgpu]
[ 7283.169464] pci_pm_freeze+0x54/0xc0 |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix null pointer panic in tracepoint in __replace_atomic_write_block
We got a kernel panic if old_addr is NULL.
https://bugzilla.kernel.org/show_bug.cgi?id=217266
BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
<TASK>
f2fs_commit_atomic_write+0x619/0x990 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43]
__f2fs_ioctl+0xd8e/0x4080 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43]
? vfs_write+0x2ae/0x3f0
? vfs_write+0x2ae/0x3f0
__x64_sys_ioctl+0x91/0xd0
do_syscall_64+0x5c/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f69095fe53f |
