| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The linux 2.4 kernel before 2.4.19 assumes that the fninit instruction clears all registers, which could lead to an information leak on processors that do not clear all relevant SSE registers. |
| The tcp_find_option function of the netfilter subsystem in Linux kernel 2.6, when using iptables and TCP options rules, allows remote attackers to cause a denial of service (CPU consumption by infinite loop) via a large option length that produces a negative integer after a casting operation to the char type. |
| The Equalizer Load-balancer for serial network interfaces (eql.c) in Linux kernel 2.6.x up to 2.6.7 allows local users to cause a denial of service via a non-existent device name that triggers a null dereference. |
| Floating point information leak in the context switch code for Linux 2.4.x only checks the MFH bit but does not verify the FPH owner, which allows local users to read register values of other processes by setting the MFH bit. |
| Linux kernel 2.2.x allows local users to cause a denial of service (crash) by using the mmap() function with a PROT_READ parameter to access non-readable memory pages through the /proc/pid/mem interface. |
| Linux kernel 2.4.x and 2.6.x for x86 allows local users to cause a denial of service (system crash), possibly via an infinite loop that triggers a signal handler with a certain sequence of fsave and frstor instructions, as originally demonstrated using a "crash.c" program. |
| The e1000 driver for Linux kernel 2.4.26 and earlier does not properly initialize memory before using it, which allows local users to read portions of kernel memory. NOTE: this issue was originally incorrectly reported as a "buffer overflow" by some sources. |
| Multiple unknown vulnerabilities in Linux kernel 2.6 allow local users to gain privileges or access kernel memory, a different set of vulnerabilities than those identified in CVE-2004-0495, as found by the Sparse source code checking tool. |
| The Linux kernel 2.4.20 and earlier, and 2.5.x, when running on x86 systems, allows local users to cause a denial of service (hang) via the emulation mode, which does not properly clear TF and NT EFLAGs. |
| Multiple unknown vulnerabilities in Linux kernel 2.4 and 2.6 allow local users to gain privileges or access kernel memory, as found by the Sparse source code checking tool. |
| The Network Address Translation (NAT) capability for Netfilter ("iptables") 1.2.6a and earlier leaks translated IP addresses in ICMP error messages. |
| The encrypted loop device in Linux kernel 2.4.10 and earlier does not authenticate the entity that is encrypting data, which allows local users to modify encrypted data without knowing the key. |
| Unknown vulnerability in Linux before 2.4.26 for IA64 allows local users to cause a denial of service, with unknown impact. NOTE: due to a typo, this issue was accidentally assigned CVE-2004-0477. This is the proper candidate to use for the Linux local DoS. |
| Linux kernel 2.4.x and 2.6.x up to 2.6.16 allows local users to bypass IPC permissions and modify a readonly attachment of shared memory by using mprotect to give write permission to the attachment. NOTE: some original raw sources combined this issue with CVE-2006-1524, but they are different bugs. |
| Race condition in the do_add_counters function in netfilter for Linux kernel 2.6.16 allows local users with CAP_NET_ADMIN capabilities to read kernel memory by triggering the race condition in a way that produces a size value that is inconsistent with allocated memory, which leads to a buffer over-read in IPT_ENTRY_ITERATE. |
| Certain modifications to the Linux kernel 2.6.16 and earlier do not add the appropriate Linux Security Modules (LSM) file_permission hooks to the (1) readv and (2) writev functions, which might allow attackers to bypass intended access restrictions. |
| A heap-based buffer overflow was discovered in bluetoothd in BlueZ through 5.48. There isn't any check on whether there is enough space in the destination buffer. The function simply appends all data passed to it. The values of all attributes that are requested are appended to the output buffer. There are no size checks whatsoever, resulting in a simple heap overflow if one can craft a request where the response is large enough to overflow the preallocated buffer. This issue exists in service_attr_req gets called by process_request (in sdpd-request.c), which also allocates the response buffer. |
| An issue was discovered in bluetoothd in BlueZ through 5.48. The vulnerability lies in the handling of a SVC_ATTR_REQ by the SDP implementation. By crafting a malicious CSTATE, it is possible to trick the server into returning more bytes than the buffer actually holds, resulting in leaking arbitrary heap data. The root cause can be found in the function service_attr_req of sdpd-request.c. The server does not check whether the CSTATE data is the same in consecutive requests, and instead simply trusts that it is the same. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: update last_gc only when GC has been performed
Currently last_gc is being updated everytime a new connection is
tracked, that means that it is updated even if a GC wasn't performed.
With a sufficiently high packet rate, it is possible to always bypass
the GC, causing the list to grow infinitely.
Update the last_gc value only when a GC has been actually performed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cpsw: Execute ndo_set_rx_mode callback in a work queue
Commit 1767bb2d47b7 ("ipv6: mcast: Don't hold RTNL for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this
change triggered the following call trace on my BeagleBone Black board:
WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/481
RTNL: assertion failed at net/8021q/vlan_core.c (236)
Modules linked in:
CPU: 0 UID: 997 PID: 481 Comm: rpcbind Not tainted 6.19.0-rc7-next-20260130-yocto-standard+ #35 PREEMPT
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x28/0x2c
show_stack from dump_stack_lvl+0x30/0x38
dump_stack_lvl from __warn+0xb8/0x11c
__warn from warn_slowpath_fmt+0x130/0x194
warn_slowpath_fmt from vlan_for_each+0x120/0x124
vlan_for_each from cpsw_add_mc_addr+0x54/0x98
cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec
__hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88
__dev_mc_add from igmp6_group_added+0x84/0xec
igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0
__ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4
__ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168
do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8
ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c
do_sock_setsockopt from __sys_setsockopt+0x84/0xac
__sys_setsockopt from ret_fast_syscall+0x0/0x54
This trace occurs because vlan_for_each() is called within
cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held.
Since modifying vlan_for_each() to operate without the RTNL lock is not
straightforward, and because ndo_set_rx_mode() is invoked both with and
without the RTNL lock across different code paths, simply adding
rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution.
To resolve this issue, we opt to execute the actual processing within
a work queue, following the approach used by the icssg-prueth driver.
Please note: To reproduce this issue, I manually reverted the changes to
am335x-bone-common.dtsi from commit c477358e66a3 ("ARM: dts: am335x-bone:
switch to new cpsw switch drv") in order to revert to the legacy cpsw
driver. |