| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary code due to a time-of-check to time-of-use (TOCTOU) race condition. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to gain root privileges due to a time-of-check to time-of-use (TOCTOU) race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Serialize the scheduler timeout handlers
V3D exposes several independent hardware queues (BIN, RENDER, TFU and
CSD) but has only a single, global reset. A timeout on any one queue
therefore has to stop, reset and restart the schedulers of every other
queue as well. That makes concurrent timeout handlers unsafe.
`reset_lock` was never able to make them safe, as a driver-side lock can
only cover the driver's &drm_sched_backend_ops.timedout_job callback.
The scheduler handles the timed out job and its pending list around that
callback, outside of the driver's control, so a global reset triggered
by one queue can still interfere with another queue that is in the
middle of handling a timeout of its own.
Consequently, if a reset happens in the CSD queue while a CL-intensive
application is running, the global reset stops and restarts the CL
queue's scheduler while that queue is handling a timeout of its own. As
drm_sched_stop() and drm_sched_start() subtract and add the credits of
every job sitting on the pending list of the scheduler they are called
on, and as the CL queue's handler concurrently takes its job off that
same list and puts it back, the stop and the start no longer see the
same set of jobs. The CL queue is left with more credits in flight than
its limit:
[ 327.302739] ------------[ cut here ]------------
[ 327.302744] WARNING: CPU: 2 PID: 43 at drivers/gpu/drm/scheduler/sched_main.c:102 drm_sched_run_job_work+0x238/0x4d0 [gpu_sched]
[ 327.302884] CPU: 2 UID: 0 PID: 43 Comm: kworker/u16:1 Not tainted 6.18.39-v8-16k+ #3 PREEMPT
[ 327.302889] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 327.302893] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched]
[ 327.302984] Call trace:
[ 327.302987] drm_sched_run_job_work+0x238/0x4d0 [gpu_sched] (P)
[ 327.302997] process_scheduled_works+0x180/0x3d0
[ 327.303010] worker_thread+0x268/0x3e8
[ 327.303016] kthread+0x140/0x250
[ 327.303022] ret_from_fork+0x10/0x20
[ 327.303031] ---[ end trace 0000000000000000 ]---
From that point on, the credit count of the CL queue is broken, causing
a complete GPU hang and UI freeze.
The DRM scheduler already provides a mechanism to serialize the timeout
handlers of different schedulers: an ordered workqueue passed as
drm_sched_init()'s @timeout_wq parameter. By default, each scheduler
queues its timeout work on the system workqueue, which runs the handlers
concurrently. Give all of the queues a shared ordered workqueue instead,
as recommended by the DRM scheduler documentation for hardware that has
distinct queues but resets globally. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Prevent XDomain delayed work use-after-free on disconnect
tb_xdp_handle_request() runs on system_wq and queues
xd->state_work via queue_delayed_work() in three request handlers:
PROPERTIES_CHANGED_REQUEST, UUID_REQUEST (via start_handshake),
and LINK_STATE_CHANGE_REQUEST. Similarly, update_xdomain() queues
xd->properties_changed_work when local properties change.
Concurrently, tb_xdomain_remove() calls stop_handshake() which does
cancel_delayed_work_sync() on both delayed works. Later,
tb_xdomain_unregister() calls device_unregister() which eventually
frees the xdomain. Since commit 559c1e1e0134 ("thunderbolt: Run
tb_xdp_handle_request() in system workqueue") moved the request
handler off tb->wq, the handler and the remove path are no longer
serialized. If queue_delayed_work() executes after
cancel_delayed_work_sync() but before the xdomain is freed, the
delayed work fires on a freed object.
Add xd->removing that tb_xdomain_remove() sets under xd->lock
before calling stop_handshake(). Each external queue site holds
the same lock and checks removing before calling
queue_delayed_work(). This provides the mutual exclusion needed:
either the queue site acquires the lock first and queues work that
the subsequent cancel will see, or the remove path acquires the
lock first and the queue site observes removing == true and skips
the queue. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: skip nlink update in cacheless mode to fix WARN_ON
v9fs_dec_count() unconditionally calls drop_nlink() on regular files,
even when the inode's nlink is already zero. In cacheless mode the
client refetches inode metadata from the server (the source of truth)
on every operation, so by the time v9fs_remove() returns, the locally
cached nlink may already reflect the post-unlink value:
1. Client initiates unlink, server processes it and sets nlink to 0
2. Client refetches inode metadata (nlink=0) before unlink returns
3. Client's v9fs_remove() completes successfully
4. Client calls v9fs_dec_count() which calls drop_nlink() on nlink=0
This race is easily triggered under heavy unlink workloads, such as
stress-ng's unlink stressor, producing the following warning:
WARNING: fs/inode.c:417 at drop_nlink+0x4c/0xc8
Call trace:
drop_nlink+0x4c/0xc8
v9fs_remove+0x1e0/0x250 [9p]
v9fs_vfs_unlink+0x20/0x38 [9p]
vfs_unlink+0x13c/0x258
...
In cacheless mode the server is authoritative and the inode is on its
way out, so locally adjusting nlink buys nothing. Skip v9fs_dec_count()
entirely when neither CACHE_META nor CACHE_LOOSE is set, which both
avoids the warning and removes a class of nlink races (two concurrent
unlinkers observing nlink > 0 and both calling drop_nlink()) that an
nlink == 0 guard alone would only narrow rather than close. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mt7621: avoid corruption of shared interrupt trigger state
The bank-shared fields like 'rising' and 'falling' are modified using
non-atomic read-modify-write operations. Since every gpio chip instance
represents an entire bank of 32 pins, if 'mediatek_gpio_irq_type()' is
called concurrently for different IRQs on the same bank a possible overwrite
of each other's configuration is possible. Thus, protect this state with
'gpio_generic_lock_irqsave' lock in the same way it is handled in irp_chip
'mediatek_gpio_irq_mask()' and 'mediatek_gpio_irq_unmask()' callbacks. |
| In the Linux kernel, the following vulnerability has been resolved:
mei: bus: access mei_device under device_lock on cleanup
Fix couple of problems in mei_cl_bus_dev_release():
mei_cl_flush_queues() is running without lock.
bus->file_list access after mei_dev_bus_put(bus) can become a
use-after-free if this was the last reference to bus.
Protect queues cleanup and WARN traversal by device lock there
to avoid the concurrent access problems.
Move WARN traversal before mei_dev_bus_put(bus).
This file uses bus variable name for mei_device, adjust
code of mei_cl_bus_dev_release() to use bus variable too. |
| In the Linux kernel, the following vulnerability has been resolved:
samples/damon/mtier: error out for zero quota goal target values
Patch series "mm/damon: avoid division by zero from damos_quota_score()".
DAMON_SAMPLE_MTIER and DAMON_LRU_SORT allow the user to trigger division
by zero in damos_quota_score(). Avoid it by adding parameters validation
checks.
This patch (of 2):
damos_quota_score() can trigger division by zero if the target_value is
zero. DAMON_SAMPLE_MTIER lets users set the target_value via
node0_mem_{used,free}_bp parameters. It doesn't guard zero value case,
though. As a result, users can trigger division by zero. Fix the issue
by returning an error when the user tries to start DAMON with zero
node0_mem_{used,free}_bp parameter values.
DAMON_SAMPLE_MTIER is just a sample module, but the consequence is quite
bad. Also the zero node0_mem_free_bp parameter might look like a
reasonable setup to some users. Hence, the issue might really happen in
the real world.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_sample_mtier/parameters
# echo 4096 > node0_start_addr
# echo 8192 > node0_end_addr
# echo 8192 > node1_start_addr
# echo 81920 > node1_end_addr
# echo 0 > node0_mem_free_bp
# echo Y > enabled
# dmesg -w
[...]
[18792.235916] Oops: divide error: 0000 [#1] SMP NOPTI
[...]
[18792.242787] RIP: 0010:damos_quota_score+0x6f/0x480
[...]
This issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/lru_sort: error out for >10000 active_mem_bp
damos_quota_score() can trigger division by zero if the target value is
zero. DAMON_LRU_SORT lets users set the target value for the hot memory
scheme via active_mem_bp parameter. It avoids setting it as the target
value if the parameter value is zero. However, it also sets the cold
memory scheme with a target value that is calculated as '10000 -
active_mem_bp + 2'. Hence, if a user sets active_mem_bp 10002, the cold
memory scheme's quota goal target value can be zero. As a result,
division by zero can be triggered. Fix by returning an error when the
user tries to start DAMON with >10000 active_mem_bp parameter value.
It makes no sense to set active_mem_bp with 10002. It also requires
module parameters write permission to reproduce the issue. That said, the
consequence is quite bad.
One reliable way to reproduce the issue is like below:
# cd /sys/module/damon_lru_sort/parameters
# echo 1000 > wmarks_high
# echo 995 > wmarks_mid
# echo 0 > wmarks_low
# echo 10002 > active_mem_bp
# echo Y > enabled
# dmesg -w
[...]
[ 597.421247] Oops: divide error: 0000 [#1] SMP NOPTI
[ 597.428848] RIP: 0010:damos_quota_score+0x6f/0x480
This issue was discovered [1] by Sashiko. |
| A race condition was addressed with improved handling of symbolic links. This issue is fixed in iOS 18.7.5 and iPadOS 18.7.5, iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.3, visionOS 26.3. A shortcut may be able to bypass sandbox restrictions. |
| A race condition was addressed with improved state handling. This issue is fixed in iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.3, tvOS 26.3, visionOS 26.3, watchOS 26.3. An app may be able to gain root privileges. |
| A race condition was addressed with improved state handling. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.4. An app may be able to elevate privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: avoid moving extents to occupied clusters
For non-auto OCFS2_IOC_MOVE_EXT operations, userspace supplies a physical
me_goal. ocfs2_move_extent() initializes new_phys_cpos from that goal and
expects ocfs2_probe_alloc_group() to replace it with a free run in the
target block group.
The probe currently leaves *phys_cpos unchanged if the scan reaches the
end of the group without finding a free run. An occupied goal at the last
bit can therefore survive the probe and be passed to
__ocfs2_move_extent(), which copies file data into a cluster still owned
by another inode before the bitmap is updated.
When the probe does find a free run, it also subtracts move_len from the
ending bit. The start of an N-bit run ending at i is i - N + 1, so the
current calculation can report the bit immediately before the free run.
Clear *phys_cpos before scanning and use the correct free-run start.
Callers already treat a zero result as -ENOSPC, so failed probes no longer
continue with an occupied caller-controlled goal. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/virt/sev: Revert "Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN"
Revert
99cf1fb58e68 ("x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN").
Section 8.8 of the SNP spec says:
Before invoking SNP_INIT_EX with INIT_RMP set to 1, software must ensure
that no CPUs contain dirty cache lines for the memory containing the RMP.
Cachelines can be moved from cache to cache in a dirty state. The
wbinvd_on_all_cpus() before SNP_INIT_EX flushes the caches for each CPU, but
if the IPIs for WBINVD race with this dirty cacheline movement, it is possible
that they may not get flushed, violating the firmware requirement.
Doing wbinvd_on_all_cpus() before setting SNPEn is safer since the RMP
table is not yet in use.
[ Heroically bisected by Srikanth. ]
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Move kvm_io_bus_get_dev() locking responsibilities to callers
kvm_io_bus_get_dev() returns a device that is only matched by the
address, and nothing else. This can cause a lifetime issue if
the matched device is not the expected type, as by the time
the caller can introspect the object, it might be gone (the srcu
lock having been dropped).
Given that there is only a single user of this helper, the simplest
option is to move the locking responsibility to the caller, which
can keep the srcu lock held for as long as it wants.
Note that this aligns with other kvm_io_bus*() helpers, which
already require the srcu lock to be held by the callers. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix unlikely race in try_get_locked_pte()
Fix an unlikely race in try_get_locked_pte(), which could have happened
if puds or pmds get unmapped between the p?dp_get() and p?d_offset()
functions. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/fb-helper: Only consider active CRTCs for vblank sync
Only synchronize fbdev output to the vblank of an active CRTC. Go over
the list of CRTCs and pick the first that matches. Fixes warnings as
the one shown below
[ 77.201354] WARNING: drivers/gpu/drm/drm_vblank.c:1320 at drm_crtc_wait_one_vblank+0x194/0x1cc [drm], CPU#1: kworker/1:7/1867
[ 77.201354] omapdrm omapdrm.0: [drm] vblank wait timed out on crtc 0
This currently happens if the fbdev output is not on CRTC 0.
Atomic and non-atomic drivers require distinct code paths. As for other
fbdev operations, implement both and select the correct one at runtime.
Not finding an active CRTC is not a bug. Do not wait in this case, but
flush the display update as before.
v4:
- avoid possible deadlocks with locking context (Sashiko)
v3:
- drop excessive state validation (Jani)
- acquire plane and CRTC mutices (Sashiko)
v2:
- move look-up code into separate helper
- support drivers with legacy modesetting
v1:
- see https://lore.kernel.org/dri-devel/1c9e0e24-9c4a-4259-8700-cf9e5fd60ca3@suse.de/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: clear CRTC color blob pointers after dropping refs
intel_crtc_put_color_blobs() drops the CRTC color blob references, but
leaves the corresponding pointers unchanged.
This can matter in intel_crtc_prepare_cleared_state(), which frees the
old CRTC hw state before calling intel_dp_tunnel_atomic_clear_stream_bw().
The latter can fail while looking up the DP tunnel group state, for
example with -EDEADLK.
If that happens, the function returns without completing the cleared
state preparation. The failed atomic state will then be cleared by the
atomic core and intel_crtc_free_hw_state() can be called again for the
same state, dropping the same blob references again.
Clear the blob pointers after dropping the references so repeated cleanup
of the same CRTC hw state is safe.
(cherry picked from commit d5005addb5f68e8a0edce249506757bdc9e3d8c8) |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: Validate NIX maximum LFs correctly
NIX maximum number of LFs can be set via devlink command
but that can be done before assigning any LFs to a PF/VF.
The condition used to check whether any LFs are assigned is
incorrect. This patch fixes that condition. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix list_del corruption in kfd_criu_resume_svm
The cleanup tail of kfd_criu_resume_svm() walks
svms->criu_svm_metadata_list and kfree()s each struct criu_svm_metadata
without removing it from the list. The list head is left pointing at
freed kmalloc-96 objects.
A second AMDKFD_IOC_CRIU_OP from the same process re-enters: list_empty()
reads the dangling ->next (use-after-free), the loop walks freed entries,
and each is kfree()'d again (double-free). This is reachable by an
unprivileged render-group user via /dev/kfd with no capabilities required.
Add list_del() before the kfree() so the list is properly emptied. The
list_for_each_entry_safe() iterator already caches the next pointer, so
unlinking during the walk is safe.
(cherry picked from commit 6322d278a298e2c1430b9d2697743d3a04b788b1) |
