| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix sched scan IE sizing
Scheduled scan built the probe request before iwl_mvm_scan_fits(),
so oversized IEs could be copied into the fixed preq buffer before
length validation. Move iwl_mvm_build_scan_probe() after the fits
check.
Also advertise max_sched_scan_ie_len using iwl_mvm_max_scan_ie_len()
so userspace limits account for driver-inserted DS/TPC bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: reject short monitor TX frames
In monitor mode, lbs_hard_start_xmit() casts skb->data to a
radiotap TX header, skips that header, and then copies the 802.11
destination address from offset 4 in the remaining frame. The
generic length check only rejects zero-length and oversized skbs, so
a short monitor frame can be read past the end of the skb data.
Require enough bytes for the radiotap TX header and the destination
address field before using the monitor-mode header layout. |
| Specially crafted CBOR input passed to QCborValue::fromCbor() in Qt Core can cause an out-of-bounds read, which may crash the application and could expose information. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: kprobes: Allow reentering kprobes while single-stepping
A kprobe can be hit while another kprobe is in KPROBE_HIT_SS state. This
can happen when tracing or perf code runs from the debug exception path
while the first kprobe is preparing or executing its out-of-line
single-step instruction.
Currently arm64 treats a kprobe hit in KPROBE_HIT_SS as unrecoverable,
the same as a hit in KPROBE_REENTER. This is too strict. A hit in
KPROBE_HIT_SS is still a one-level reentry and can be handled by saving
the current kprobe state and setting up single-step for the new probe,
just like reentry from KPROBE_HIT_ACTIVE or KPROBE_HIT_SSDONE.
The truly unrecoverable case is hitting another kprobe while already in
KPROBE_REENTER, because the reentry save area has already been consumed.
Move KPROBE_HIT_SS to the recoverable reentry cases and leave
KPROBE_REENTER as the unrecoverable nested reentry case.
This change also requires saving saved_irqflag in struct prev_kprobe.
When a nested kprobe calls kprobes_save_local_irqflag(), it overwrites
kcb->saved_irqflag with the currently masked DAIF value, losing the
outer kprobe's original DAIF state. Without this fix, when the outer
kprobe's single-step finishes, kprobes_restore_local_irqflag() applies
the wrong DAIF mask and leaves interrupts permanently disabled.
Extend struct prev_kprobe with a saved_irqflag field and save/restore it
alongside kp and status. This ensures the outer kprobe's original
interrupt state is preserved across reentry.
This mirrors the x86 fix in commit 6a5022a56ac3
("kprobes/x86: Allow to handle reentered kprobe on single-stepping"). |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Validate BASE_ERROR_EVENT payload size
BASE_ERROR_EVENT carries a variable number of message reports,
with the count encoded in error_status. The notification parser used
that count without checking whether the received payload contained all
reported entries.
Reject truncated payloads before copying the report array. |
| Libyal libesedb through 20260704 contains a heap out-of-bounds read vulnerability in libesedb_record_get_multi_value() that allows attackers to read past buffers via unbounded multi-value offset tables. Attackers can supply a crafted ESE/EDB database processed by esedbexport to crash the application or expose up to about 32 KiB of adjacent heap memory. |
| A buffer overflow was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sequoia 15.8.2, macOS Sonoma 14.8.8, macOS Tahoe 26.6. A remote attacker may be able to cause unexpected system termination or corrupt kernel memory. |
| An issue in SKYWORTH DIGITAL CO., LTD SK-WR6640X Wi-Fi 6 Dual-Band Fiber Router (AX1800M) V1.0.3 allows a remote attacker to obtain sensitive information via the hidden_factory_switch.gch |
| libfwsi through 20260522 contains a heap out-of-bounds read vulnerability in libfwsi_mtp_volume_values_read_data() that allows attackers to read past buffer bounds via crafted MTP volume shell items. Attackers can embed a 10 to 53 byte shell item with item data size of 44 or more in a .lnk file, jump list or shell bag to crash consuming processes. |
| libfwsi through 20260522 contains a heap out-of-bounds read vulnerability in libfwsi_mtp_file_entry_values_read_data() that allows attackers to read past buffer bounds via crafted MTP file entry shell items. Attackers can embed a 10 to 73 byte shell item with item data size of 44 or more in .lnk files, jump lists or shell bags to crash libfwsi consumers. |
| Libyal libpff through 20260926 contains an integer underflow in libpff_record_entry_get_multi_value() that allows attackers to trigger heap out-of-bounds reads via non-monotonic multi-value offsets. Attackers can craft PST, OST or PAB files with decreasing PT_MV_STRING8, PT_MV_UNICODE or PT_MV_BINARY offsets to crash libpff, pypff or pffexport and expose adjacent heap memory. |
| Tink-go (tink-crypto/tink-go) through 2.8.0 contains an input-validation vulnerability where keyset.NewHandleWithNoSecrets() and ReadWithNoSecrets() skip the structural Validate() step before constructing a keyset.Handle, allowing malformed public or no-secret keysets that violate Tink's keyset invariants to be accepted. Attackers can supply a malformed keyset, such as one with an enabled public key lacking a valid primary key or a DESTROYED key with no KeyData, causing inconsistent downstream validation where functions like jwt.JWKSetFromPublicKeysetHandle() process the invalid handle and produce a JWK set, potentially misleading applications that rely on successful handle construction as proof of keyset integrity. |
| SODOLA SL902-SWTGW124AS firmware before 200.2.12 contains a buffer overflow vulnerability that allows unauthenticated remote attackers to cause a denial of service by sending an oversized boundary value in the Content-Type header of a crafted POST request. Attackers can exploit the embedded HTTP server's multipart/form-data boundary parser to cause the device to become fully unresponsive — dropping all management access and traffic forwarding during its self-recovery cycle. |
| AimOne Video Converter 2.04 Build 103 contains a buffer overflow vulnerability in its registration form that causes application crashes. Attackers can generate a 7000-byte payload to trigger the denial of service and potentially exploit the software's registration mechanism. |
| NetworkSleuth 3.0.0.0 contains a denial of service vulnerability that allows attackers to crash the application by supplying an oversized registration key. Attackers can generate a 1000-character buffer payload and paste it into the registration key field to trigger an application crash. |
| NetShareWatcher 1.5.8.0 contains a structured exception handler buffer overflow vulnerability that allows local attackers to execute arbitrary code by supplying malicious input. Attackers can craft a payload with overwritten SEH and NSEH pointers through the Restrictions custom filter field to trigger code execution when the Find function is invoked. |
| A vulnerability has been identified in Capital Embedded AR Classic 431-422 (All versions), Capital Embedded AR Classic R20-11 (All versions < V2303), Desigo PXC00-E.D (All versions >= V2.3), Desigo PXC00-U (All versions >= V2.3), Desigo PXC001-E.D (All versions >= V2.3), Desigo PXC100-E.D (All versions >= V2.3), Desigo PXC12-E.D (All versions >= V2.3), Desigo PXC128-U (All versions >= V2.3), Desigo PXC200-E.D (All versions >= V2.3), Desigo PXC22-E.D (All versions >= V2.3), Desigo PXC22.1-E.D (All versions >= V2.3), Desigo PXC36.1-E.D (All versions >= V2.3), Desigo PXC50-E.D (All versions >= V2.3), Desigo PXC64-U (All versions >= V2.3), Desigo PXM20-E (All versions >= V2.3). The affected product does not properly validate input bounds before accessing packet data. This could allow an unauthenticated remote attacker to trigger memory reads outside the intended packet boundaries. |
| Adobe Framemaker is affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| A security vulnerability in HPE NonStop TMF Auditread2 can cause Denial of Service. |
| A vulnerability in HPE NonStop Kernel Level Thread Model Lib can cause stack buffer overflow which can allow arbitrary code execution. |
