| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: reset skb headers before unicast and multicast filtering
Socket filters can use SKF_NET_OFF and SKF_LL_OFF to read relative to
an skb's network and MAC headers. Netlink producers may reserve
headroom without resetting those headers, allowing a receiving socket's
filter to read data before the initialized message.
For example, IWPM HELLO replies are allocated with dev_alloc_skb(),
which reserves NET_SKB_PAD bytes. An unprivileged NETLINK_RDMA user can
attach a classic socket filter and disclose this headroom through the
length of the delivered reply. The resets in netlink_dump() do not help
because IWPM sends a separately allocated skb through netlink_unicast().
Reset both headers before running the receiver's filter in unicast and
broadcast delivery, as is already done for dump skbs. This also covers
other netlink producers that reserve headroom without changing their
allocation or message-building code. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix race in discovery auth updates
Separate configfs opens can concurrently update the discovery AuthMethod
parameter. Both callers may free the same value in
iscsi_update_param_value(), causing a double-free.
Protect the lookup and replacement with the discovery TPG access lock,
as used by the other TPG configfs parameter updates. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: Protect the recovery list during debugfs reads
Recovery participant records must remain alive while debug_state_print()
walks reco.node_data and formats their fields. The formatter holds
dlm->spinlock, but the recovery participant list is protected by
dlm_reco_state_lock. In particular, dlm_destroy_recovery_area() detaches
the list under dlm_reco_state_lock and frees the detached records after
releasing it. A concurrent debugfs open can therefore read freed memory.
Protect the participant traversal and field reads in debug_state_print()
with dlm_reco_state_lock, matching the existing list writers. This also
serializes the traversal against list_add_tail() during recovery-area
initialization. Make the existing lock available to the debug code
through dlmcommon.h; the lock remains internal to the OCFS2 DLM module.
Release dlm->spinlock after formatting the other domain state and before
acquiring dlm_reco_state_lock, so the debug reader does not nest the two
locks. Leave recovery list insertion, detachment and freeing unchanged.
KASAN report as below:
BUG: KASAN: slab-use-after-free in debug_state_open+0x1169/0x12d0
Read of size 4 at addr ffff88810662ef80 by task dlm-state-stres/896
CPU: 1 UID: 0 PID: 896 Comm: dlm-state-stres Not tainted 7.3.0-rc4-next-20260921-pmb-ocfs2-functional-v1+ #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x93/0xd0
print_report+0xce/0x630
? debug_state_open+0x1169/0x12d0
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x20e/0x420
? debug_state_open+0x1169/0x12d0
kasan_report+0xe0/0x110
? debug_state_open+0x1169/0x12d0
debug_state_open+0x1169/0x12d0
? __pfx_debug_state_open+0x10/0x10
full_proxy_open_regular+0x193/0x310
do_dentry_open+0x595/0x12d0
? __pfx_full_proxy_open_regular+0x10/0x10
vfs_open_consume+0xd1/0x400
? srso_alias_return_thunk+0x5/0xfbef5
path_openat+0x18d0/0x2020
? __pfx_path_openat+0x10/0x10
do_file_open+0x21e/0x470
? __pfx_do_file_open+0x10/0x10
? _raw_spin_unlock+0x23/0x40
? srso_alias_return_thunk+0x5/0xfbef5
? alloc_fd+0x3a6/0x6b0
do_sys_openat2+0xf4/0x1b0
? __pfx_do_sys_openat2+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __fput+0x5b5/0xa60
__x64_sys_openat+0x136/0x1e0
? __pfx___x64_sys_openat+0x10/0x10
do_syscall_64+0x114/0x620
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[Register dump omitted.]
</TASK>
Allocated by task 880:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kmalloc_cache_noprof+0x28d/0x610
dlm_remaster_locks+0x147/0x1d90
dlm_do_recovery+0xde1/0x1580
dlm_recovery_thread+0x109/0x300
kthread+0x351/0x460
ret_from_fork+0x659/0x940
ret_from_fork_asm+0x1a/0x30
Freed by task 880:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x308/0x580
dlm_destroy_recovery_area+0x285/0x460
dlm_remaster_locks+0x17c4/0x1d90
dlm_do_recovery+0xde1/0x1580
dlm_recovery_thread+0x109/0x300
kthread+0x351/0x460
ret_from_fork+0x659/0x940
ret_from_fork_asm+0x1a/0x30
The buggy address belongs to the object at ffff88810662ef80
which belongs to the cache kmalloc-32 of size 32
The buggy address is located 0 bytes inside of
freed 32-byte region [ffff88810662ef80, ffff88810662efa0)
[Page and memory-state dumps omitted.] |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: avoid hashing the network namespace pointer
The netlink rhashtable key includes a raw struct net pointer and a
user-controlled port ID. Both /proc/net/netlink and socket diagnostics
expose the table's bucket order. By binding and rebinding chosen
NETLINK_USERSOCK port IDs, an unprivileged reader can distinguish equal
buckets and recover the low bits of the Jenkins hash. Its 32-bit seed
and the limited set of kernel-image slides can then be searched offline
to recover the address of init_net.
Use the namespace's unique, non-address net_cookie in the comparison
key instead. It is assigned before the per-net initializers run and
remains unchanged for the namespace's lifetime. The lookup key and
object hash are still built by netlink_compare_arg_init(), keeping
lookup, insertion, removal and rehashing consistent while preserving
namespace separation. Neither public table walker needs to change.
Reading the socket's namespace cookie in netlink_compare() is safe
under RCU, including during namespace teardown. netlink_release()
removes the socket from the hash table and defers its final put with
call_rcu(). cleanup_net() runs the per-net exit methods and waits for
outstanding RCU callbacks with rcu_barrier() before freeing namespace
storage.
Unlike ns.ns_id, net_cookie is also available and initialized during
setup_net() in older stable kernels, making the change straightforward
to backport to v5.15 and later. |
| In the Linux kernel, the following vulnerability has been resolved:
calipso: keep BIG TCP payload_len in calipso_skbuff_setattr()
calipso_skbuff_setattr() adjusts payload_len by the length of the
option it inserts or resizes:
payload = ntohs(ip6_hdr->payload_len);
ip6_hdr->payload_len = htons(payload + len_delta);
GRO can build BIG TCP packets larger than IPV6_MAXPLEN, and stores
payload_len == 0 for them; ipv6_payload_len() then falls back to
skb->len. For such a packet forwarded to a destination mapped to
CALIPSO, the code above writes len_delta (or 65536 + len_delta when
shrinking) into payload_len, and ipv6_payload_len() no longer falls
back to skb->len. nf_tables, conntrack and sch_cake rely on it.
The same arithmetic also wraps when a packet grows past IPV6_MAXPLEN,
and a BIG TCP packet that shrinks below IPV6_MAXPLEN should get its
real length back.
Set payload_len from the skb length with ipv6_set_payload_len(), which
stores 0 above IPV6_MAXPLEN and the real length otherwise, as
ipv6_gro_complete() does. The network header was just reset to
skb->data, so skb->len - sizeof(*ip6_hdr) is the payload length.
Tested on one kernel (arm64, QEMU) with SELinux permissive, a minimal
mdp-generated policy (network_peer_controls=1), "netlabelctl calipso
add pass doi:16" and a NetLabel mapping of fd00:2::/64 to CALIPSO
DOI 16. calipso_skbuff_setattr() was called through
netlbl_skbuff_setattr() from a test-only debugfs hook (not part of
this patch) adding a level-only label; payload_len after the call:
case before fix after fix real length
1000, unlabeled 1016 1016 1016
70000 GSO, payload_len 0 16 0 70016
65530 GSO, grows past MAXPLEN 10 0 65546
65540 GSO with a 24 byte hop
header, shrinks below MAXPLEN 65528 65532 65532
1000 with a 24 byte hop header 992 992 992
(0 means ipv6_payload_len() returns the real length.) On the forward
path, with a client injecting unlabeled UDP through a router to a
server, the router adds the CALIPSO option and the server delivers all
datagrams (Udp6InDatagrams 5, Ip6InTruncatedPkts 0) with this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: fix memory leak in gpiod_set_array_value_complex() on error paths
A drive-by review by Sashiko reports that, after a failed call to
gpiochip_set_multiple(), gpiod_set_array_value() returns abruptly,
bypassing the freeing of possibly alloced bitmaps, potentially leaking
memory. It is an unlikely error path, but is possible.
Defer the return code check until after the bitmap_free() block. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Fix shift-out-of-bounds for aggregated ALH capture
When ch_count is smaller than blob->alh_cfg.device_count (e.g. a mono
capture stream, such as a SmartMic, aggregated across multiple SDW
links), step = ch_count / blob->alh_cfg.device_count truncates to 0.
The subsequent GENMASK(step - 1, 0) then underflows step - 1 (u32) to
UINT_MAX, causing GENMASK()'s internal shift to use an out-of-bounds
exponent:
UBSAN: shift-out-of-bounds in sound/soc/sof/ipc4-topology.c:2363:13
shift exponent 18446744069414584384 is too large for 64-bit type 'long unsigned int'
Treat ch_count < device_count the same way as the existing "channels
equal to output reference channels" case: apply the same ch_mask to
every aggregated device instead of trying to split channels that
can't be evenly divided. |
| In the Linux kernel, the following vulnerability has been resolved:
watch_queue: Fix note pool publication race in watch_queue_set_size()
There is a race between watch_queue_set_size() and post_one_notification().
watch_queue_set_size() publishes wqueue->notes, notes_bitmap, nr_pages and
nr_notes with plain stores, and post_one_notification() reads them with
plain loads under a different lock, so nothing orders the four stores
against the poster's loads: depending on the build, notes can be stored
last (gcc 14 on x86-64 does this). Since keyctl_watch_key() lets a watch
attach to a queue before it is sized, post_one_notification() can already
be running on another CPU at that moment: it reads nr_notes > 0, passes
its bounds check, and then reads notes while it is still NULL,
dereferencing notes[0].
An unprivileged user triggers this reliably by watching one of its own
keys through a notification pipe and racing ioctl(IOC_WATCH_QUEUE_SET_SIZE)
on that pipe against keyctl(KEYCTL_SETPERM) on the key from another CPU,
triggering:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:post_one_notification.isra.0+0xa2/0x1e0
Call Trace:
__post_watch_notification+0x148/0x180
keyctl_setperm_key+0x119/0x130
do_syscall_64+0x108/0x4c0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: Fatal exception in interrupt
Fix this by publishing nr_notes last with smp_store_release(), and by
reading it once with smp_load_acquire() in post_one_notification() before
the bitmap and the page array are touched. A poster that observes a
non-zero nr_notes then also observes the pool behind it; one that observes
zero drops the notification as before. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kvm: Don't consume async #PF flags on a kernel #PF in NMI context
An async #PF "page not present" event arrives through the #PF vector,
and its reason sits in the per-CPU apf_reason.flags until
__kvm_handle_async_pf() reads and clears it. If an NMI arrives after
the event is injected and before the #PF handler reads the flags, and
the NMI handler itself takes a #PF, that fault reads and clears the
flags belonging to the #PF it interrupted. It then finds interrupts
disabled in the NMI context it interrupted, and panics:
Kernel panic - not syncing: Host injected async #PF in interrupt
disabled region
Call Trace:
<NMI>
panic+0x52/0x60
__kvm_handle_async_pf+0xb0/0xb0
exc_page_fault+0x71/0xb0
asm_exc_page_fault+0x27/0x30
RIP: 0010:__get_user_nocheck_8+0x6/0x20
perf_callchain_user+0x147/0x1a0
get_perf_callchain+0x12d/0x1c0
...
perf_event_nmi_handler+0x26/0x50
exc_nmi+0xe8/0x110
RIP: 0010:asm_exc_page_fault+0x0/0x30
</NMI>
The last RIP line shows the NMI landing on the first instruction of
the #PF entry. perf with user call chains takes such a fault: the
sampling NMI walks the user stack with __get_user(), which faults when
a saved frame pointer is not a valid user address or the walk runs off
the top of the stack. The same window exists when KVM, running as an
L1 hypervisor with DELIVERY_AS_PF_VMEXIT, reads the flags itself after
a #PF VM-exit.
The NMI entry code saves and restores CR2 for this nesting, but not the
async #PF reason. Andy Lutomirski described the race, with perf as the
example, when async #PF delivery was reworked in 2020 [1]. Saving and
clearing the flags across the NMI, next to CR2, was discussed there but
not merged.
Since that rework, Linux has stopped setting KVM_ASYNC_PF_SEND_ALWAYS,
so the host delivers "page not present" only for user mode faults and
a kernel-mode fault in NMI context (including kernel-mode #MC and #DB)
cannot be an async page fault. In that case, return without touching
the flags so that the interrupted handler finds them intact.
Tested on v7.3-rc5 in a 4-vCPU, 2 GiB guest restored from a snapshot
whose memory is served on demand through userfaultfd, so that reading
it back takes async #PFs, while every thread samples hardware cycles
with user call chains and points its frame pointer at an unmapped page.
Without this patch the guest panicked as above in 3 of 3 runs. With it,
the guest survived 3 of 3 runs of 60 seconds, and the host counted
148,441 to 153,334 kvm_async_pf_not_present events in the first 20
seconds of each. On 6.18.50 the results were the same: the guest
panicked without the patch and survived with it. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Reset MMU back to the root MMU if loading L2 state fails for !VM-Entry
Reset the vCPU's MMU pointer back to the root MMU if loading L2 state fails
in the "not from VM-Entry" case, i.e. when emulating RSM or handling
KVM_SET_NESTED_STATE. Failure to unwind the MMU pointer results in KVM
trying to run L1 with a nested MMU, and is especially problematic if the
vCPU manages to free its nested state before the VM crashes. Constructing
the root for a nested EPT MMU goes through vmcs12, which is dynamically
allocated/freed when nVMX is enabled/disabled. And so if the nested state
is freed with the MMU still pointing at the nested MMU, KVM will hit a NULL
pointer deref when attempting to get L1=>L2 EPTP.
BUG: kernel NULL pointer dereference, address: 0000000000000078
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 114a2d067 P4D 111743067 PUD 11141f067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 20 UID: 1000 PID: 1272 Comm: nested_tdp_faul Not tainted 7.3.0-rc4-8c89f11d1a99b-sink-vm #1914 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
Call Trace:
<TASK>
kvm_mmu_load+0xcd/0x870 [kvm]
kvm_arch_vcpu_ioctl_run+0x18f5/0x1f80 [kvm]
kvm_vcpu_ioctl+0x2c7/0x970 [kvm]
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x9c/0x4d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47491b
</TASK>
Modules linked in: kvm_intel kvm irqbypass
CR2: 0000000000000078
---[ end trace 0000000000000000 ]---
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
[sean: write changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
fsnotify: prevent mark additions during connector teardown
fsnotify_destroy_marks() keeps a reference to its current mark while it
drops conn->lock to destroy the mark. This stabilizes the forward-walk
cursor, but does not prevent a new mark from being inserted before it.
For example, an inotify watch re-added after IN_IGNORED sorts before the
old, detached mark for the same group. The walk can miss the replacement
and then detach the entire connector from the object.
The replacement is still on its group's marks_list and, for inotify, in
the watch IDR. The group mutex no longer protects the connector's object
from disappearing. An unprivileged fdinfo read racing the final detach
can consequently call igrab(NULL):
BUG: KASAN: null-ptr-deref in igrab+0x24/0x100
Write of size 4 at addr 0000000000000148
Call Trace:
igrab+0x24/0x100
inotify_show_fdinfo+0x1dc/0x5e0
seq_show+0x397/0x690
Set a DESTROYING flag under conn->lock before starting the walk, and
reject new marks on that connector with -ENOENT. The existing add-mark
error paths undo the temporary group-list entry and the backend's watch
allocation. Do not wait for teardown while holding the group mutex,
which the destroyer needs. Once the old connector is detached, an add
can install a fresh connector as before.
This closes the insertion race for all object types using the common
connector teardown, without changing the mark reference or SRCU lifetime
rules. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: free the sbi after a grace period
ext4_get_link() follows a symlink that keeps its target in a data block
in rcu pathwalk mode with ext4_getblk(EXT4_GET_BLOCKS_CACHED_NOWAIT).
That reads s_mount_state in the ASSERT() of ext4_getblk() and again in
ext4_es_lookup_extent(), and the lookup bumps the extent status hit or
miss counter, all through sb->s_fs_info.
ext4_put_super() destroys those counters, clears sb->s_fs_info and frees
the sbi without waiting for a grace period. A pathwalk that is still in
ext4_get_link() when the last reference to the mount goes away then
dereferences a NULL s_fs_info, the freed sbi or the destroyed percpu
counters.
With a pathwalk held up in ext4_get_link() while the last reference
goes away:
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
RIP: 0010:ext4_getblk+0xf0/0x640
Call Trace:
<TASK>
ext4_get_link+0x26c/0x410
pick_link+0xf96/0x1780
step_into_slowpath+0x9b8/0x1250
path_lookupat+0x484/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
vfs_fstatat+0x4d/0x90
__do_sys_newfstatat+0xa0/0x100
do_syscall_64+0x10e/0x5e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
So far that has been hard to hit. umount(2) waits for a grace period in
namespace_unlock() before it drops the mount, so only a mount whose last
reference goes away elsewhere, like the close of a file or a chdir out of
a lazily unmounted directory, can race a walker.
Keep sb->s_fs_info and free the sbi together with the extent status
counters after a grace period. Split the counters out of
ext4_es_unregister_shrinker() for that. The shrinker still gets wasted
in ext4_put_super(), the counters go with the sbi. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: free the sbi after a grace period
If the "nocase" mount option ntfs3 uses custom hash and dentry compare
functions. Both access ntfs3 superblock private information in rcu
pathwalk. ntfs_put_super() and ntfs3_kill_sb() drop the info without any
rcu delay. A lookup that's still inside the filesystem when the last
reference to the mount is dropped causes a UAF. With a pathwalk held up
in ntfs_d_hash() while the last reference to the mount goes away:
BUG: KASAN: slab-use-after-free in ntfs_nls_to_utf16+0x752/0x940
Read of size 8 at addr ff1100010453c850 by task walker/99
Call Trace:
<TASK>
ntfs_nls_to_utf16+0x752/0x940
ntfs_d_hash+0x22b/0x500
link_path_walk+0x11ad/0x1d30
path_lookupat+0x63/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
[...]
Allocated by task 95:
__kmalloc_cache_noprof+0x249/0x560
ntfs_init_fs_context+0x2db/0x5a0
alloc_fs_context+0x52e/0xc70
[...]
Freed by task 98:
kfree+0x1db/0x5b0
deactivate_locked_super+0x9c/0xf0
cleanup_mnt+0x9f/0x130
task_work_run+0x131/0x250
The bug is currently masked by the grace period in namespace_unlock()
for umount(2). Keep the necessary information until the filesystem
private info is freed and free it with an rcu delay.
ntfs3_free_sbi() now runs from an rcu callback and drops the upcase
table via ntfs_put_shared(). So switch s_shared_lock over to
spin_lock_bh(). Otherwise the callback can deadlock against a task
holding the lock on the same cpu. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Fix mm reuse handling for FUT_OFF_MMSHARED
A FUT_OFF_MMSHARED futex is a shared futex that refers to an MM.
It is possible for a process to wait on a shared futex with a different MM
because a FUT_OFF_INODE waiter can be requeued onto a FUT_OFF_MMSHARED
futex by another process.
This can cause FUT_OFF_MMSHARED waiters on a freed MM to consume
wakeups intended for a newly allocated MM at the same address.
Fix it by keying FUT_OFF_MMSHARED using a unique 64-bit per-MM ID.
Leave private futexes as before to avoid influencing the performance of the
hotpath.
(Multi-threaded processes typically implicitly use FUT_OFF_MMSHARED by
setting clear_child_tid such that it points into anonymous memory, which
causes mm_release() in a multi-threaded mm to perform FUTEX_WAKE.) |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix use-after-free in __tcf_action_put()
__tcf_action_put() decrements the reference count before decrementing the
binding count. Another thread can free the action between these operations,
causing the binding-count update to access freed memory. KASAN reports it
as:
BUG: KASAN: slab-use-after-free in __tcf_action_put+0x327/0x340
Write of size 4 at addr ff11000000d46420 by task tc-put-pause/64
Hold the action IDR mutex across both counter updates and IDR removal,
keeping cleanup outside the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: don't drop the runtime PM reference twice in amdgpu_gpr
amdgpu_debugfs_gpr_read() drops its runtime PM reference right after
reading the wave registers. When copying them to userspace fails, it
jumps to the err label, which drops the reference a second time. A read
into a bad buffer on Navi31 either steals a reference somebody else
holds (power/runtime_usage goes from 1 to 0) or underflows the count:
amdgpu 0000:03:00.0: Runtime PM usage count underflow!
The registers are already in the kernel buffer at that point, so finish
the hardware access first and copy the buffer with a single
copy_to_user() instead of the put_user() loop with its own error path.
(cherry picked from commit 31035bbd74f7c3e10c163db875b8e67f8b50ee6a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/exec: don't immediately add prelocked obj to array of locked objs
When a contention is detected the drm_exec object grabs a reference to
the contended object, unlocks all other objects and pre-locks the
contended one before anything else.
The problem is that it is possible that this pre-locked object was about
to be destroyed and drm_exec is now holding the last reference to it.
So we never actually see this pre-locked object again to be explicitly
locked and so also never reserve a slot for a dma_fence object on it.
Should the driver now use drm_exec_for_each_locked_object() to add a new
fence to all locked objects we eventually see a warning or even a
BUG_ON() to prevent random memory corruption.
Fix this by keeping the prelocked object out of the array of locked objs
until it was explicitly mentioned by the driver again.
If the prelocked object is never mentioned again by the driver
just unlock and drop the reference at the end of the locking loop. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix hist trigger timestamps for buffered events
Syzkaller triggered a WARN_ON_ONCE(!nest) warning:
WARNING: kernel/trace/ring_buffer.c:821 at ring_buffer_event_time_stamp
Call trace:
ring_buffer_event_time_stamp
hist_field_timestamp
hist_fn_call
event_hist_trigger
event_triggers_call
__event_trigger_test_discard
trace_event_buffer_commit
do_trace_event_raw_event_sched_switch
trace_event_raw_event_sched_switch
The warning is probabilistically reproducible and is related to syzkaller
executing the following commands:
echo 'prev_pid == 999999' > events/sched/sched_switch/filter
echo 'hist:keys=common_timestamp' > events/sched/sched_switch/trigger
The specific triggering process is as follows:
CPU 0 CPU 1
(context switching) (echo 'hist:keys=common_timestamp' > \
events/sched/sched_switch/trigger)
do_trace_event_raw_event_##call
trace_event_buffer_lock_reserve
if (!tr->no_filter_buffering_ref &&
trace_file->flags & EVENT_FILE_FL_FILTERED)
return entry; // return directly
event_hist_trigger_parse
hist_register_trigger
tracing_set_filter_buffering(file->tr, true);
tr->no_filter_buffering_ref++;
__trace_buffer_lock_reserve
rb_start_commit
local_inc(&cpu_buffer->committing); // skipped and not executed
trace_event_buffer_commit
__event_trigger_test_discard
event_triggers_call
event_hist_trigger
hist_fn_call
hist_field_timestamp
ring_buffer_event_time_stamp
nest = local_read(&cpu_buffer->committing);
WARN_ON_ONCE(!nest) // trigger warning
The root cause is that when an event file has a filter attached and the
hist trigger has not yet been attached, trace_event_buffer_lock_reserve()
writes the event into the per-CPU trace_buffered_event temp buffer instead
of reserving it in the ring buffer, so cpu_buffer->committing is not
incremented. When the event is later processed at commit time by a hist
trigger, hist_field_timestamp() -> ring_buffer_event_time_stamp() sees a
zero committing count, triggering WARN_ON_ONCE(!nest).
tracing_event_time_stamp() was added by commit d8279bfc5e959 ("tracing:
Add tracing_event_time_stamp() API") for exactly this case: if the event
is the per-CPU trace_buffered_event, it returns the current ring buffer
timestamp. But it never gained a caller. Use it in hist_field_timestamp(),
so that a hist trigger that races onto a buffered event records the
current time, which is only marginally later than when the event was
recorded, instead of warning and recording a bogus timestamp. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix use-after-free in do_tcp_getsockopt(TCP_CONGESTION)
do_tcp_getsockopt() reads icsk->icsk_ca_ops->name without holding
rcu_read_lock(). Since commit 0baf26b0fcd7 ("bpf: tcp: Support
tcp_congestion_ops in bpf"), icsk_ca_ops can point to dynamically
allocated BPF struct_ops memory that may be freed concurrently via
setsockopt(TCP_CONGESTION), leading to a use-after-free.
BUG: KASAN: slab-use-after-free in _copy_to_user+0x37/0x60
Read of size 16 at addr ffff888013505260 by task exploit/149
_copy_to_user+0x37/0x60
do_tcp_getsockopt+0x158a/0x2460 (net/ipv4/tcp.c:4585)
tcp_getsockopt+0x91/0xf0
__sys_getsockopt+0xf7/0x170
Fix this by holding rcu_read_lock() around the ca_ops->name access,
using READ_ONCE() to load icsk_ca_ops, and copying the name to a
stack buffer before releasing the lock. Also annotate the relevant
icsk_ca_ops stores with WRITE_ONCE() to fix the accompanying KCSAN
data-race issue. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix use-after-free in do_tcp_getsockopt(TCP_CC_INFO)
do_tcp_getsockopt() reads icsk->icsk_ca_ops and dereferences the
get_info function pointer without rcu_read_lock(). With BPF struct_ops
congestion control, ca_ops can point to dynamically allocated memory
that is freed concurrently, resulting in a use-after-free when the
kernel dereferences or calls through the stale pointer.
BUG: KASAN: slab-use-after-free in do_tcp_getsockopt+0x2037/0x23e0
Read of size 8 at addr ffff888013701258 by task exploit/149
do_tcp_getsockopt+0x2037/0x23e0 (net/ipv4/tcp.c:4564)
tcp_getsockopt+0x91/0xf0
__sys_getsockopt+0xf7/0x170
Fix this by wrapping the ca_ops load and get_info call within
rcu_read_lock()/rcu_read_unlock(), and using READ_ONCE() to load
the icsk_ca_ops pointer. |
