| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Missing Authorization vulnerability in Magepeople inc. WpTravelly tour-booking-manager allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WpTravelly: from n/a through 2.3.5. |
| Chamilo LMS from 2.0.0-alpha.1 before 2.0.0-RC.3 contains a missing authorization vulnerability in legacy AJAX handlers under public/main/inc/ajax/ that exposes user names and certificates. Unauthenticated or low-privileged users can call actions like get_users_by_group_course, user_by_all_roles, and export_all_certificates to harvest user names and other learners' certificate PDFs. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits
when the guest's virtual TPR falls under the specified threshold,
allowing KVM to inject previously masked interrupts.
KVM handles these VM exits in handle_tpr_below_threshold().
Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits")
optimized this function by calling apic_update_ppr() instead of raising
KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is
a pending, deliverable interrupt.
However, if there are no new interrupts pending, apic_update_ppr() does
not issue the request. Thus, kvm_lapic_update_cr8_intercept() and
vmx_update_cr8_intercept() are not called before VM entry, which results
in a high, stale TPR_THRESHOLD. This is problematic due to the following
sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM:
The following check is performed if the “use TPR shadow” VM-execution
control is 1 and the “virtualize APIC accesses” and “virtual-interrupt
delivery” VM-execution controls are both 0: the value of bits 3:0 of
the TPR threshold VM-execution control field should not be greater
than the value of bits 7:4 of VTPR.
This error condition is typically not observed when KVM runs on a bare
metal system because modern processors support APICv, which enables
virtual-interrupt delivery, and which KVM uses when possible. This
causes the processor to no longer generate TPR-below-threshold exits
and to no longer check TPR_THRESHOLD on entry. However, when running
on older platforms, or under nested virtualization on a hypervisor that
does not support virtual-interrupt delivery and enforces this check
(like Hyper-V) this can cause a VM entry failure with hardware error
0x7, as seen in [1].
Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not
find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT).
Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in
apic_update_ppr(), as they now become redundant. This ensures that any
path that updates the guest's PPR also figures out if KVM needs to wait
for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1
Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want
to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the
hypercall is something other than one of the supported Hyper-V hypercalls.
When all of the above conditions are met, KVM will intercept VMMCALL but
never forward it to L1, i.e. will let L2 make hypercalls as if it were L1.
The TLFS says a whole lot of nothing about this scenario, so go with the
architectural behavior, which says that VMMCALL #UDs if it's not
intercepted.
Opportunistically do a 2-for-1 stub trade by stub-ifying the new API
instead of the helpers it uses. The last remaining "single" stub will
soon be dropped as well.
[sean: rewrite changelog and comment, tag for stable, remove defunct stubs] |
| The Ettrick Escape Room Booking WordPress plugin before 1.3.1 does not verify a booking's payment status against the payment provider before marking it paid and confirmed, allowing unauthenticated attackers to mark bookings as paid without paying. |
| The Envira Gallery WordPress plugin before 1.16.2 does not correctly check authorization on its gallery-conversion feature, verifying that the requester can edit an arbitrary post they name rather than that they are allowed to create the Envira Gallery WordPress plugin before 1.16.2's own gallery content, allowing users with contributor-level access to create and publish gallery posts that the Envira Gallery WordPress plugin before 1.16.2's settings otherwise withhold from them. |
| The Booking Package WordPress plugin before 1.7.31 does not perform any authorization or validity check before resetting its premium subscription state, allowing unauthenticated attackers to disable the Booking Package WordPress plugin before 1.7.31's paid features. |
| The Wava Payment Plugin WordPress plugin before 0.3.10 does not perform any authorisation, nonce or origin verification on one of its public REST endpoints, allowing unauthenticated attackers to overwrite the stored credential that identifies the merchant account the store's payments are created against, to force the integration into a verified state the site owner never completed, and to remove the payment method from the store's checkout. |
| The Wava Payment Plugin WordPress plugin before 0.3.10 does not verify the authenticity of incoming payment-provider notifications, nor restrict who may send them, allowing unauthenticated attackers to change the status of any WooCommerce order in the store, including marking an unpaid order as paid and completed, and cancelling other customers' orders.
In versions up to 0.3.7 the response additionally returns the affected order's billing details, disclosing customer names, addresses, email addresses and phone numbers to the same unauthenticated caller. |
| Missing Authorization vulnerability in Castos Seriously Simple Podcasting seriously-simple-podcasting allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Seriously Simple Podcasting: from n/a through 3.17.0. |
| Missing Authorization vulnerability in Arraytics Booktics booktics allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Booktics: from n/a through 1.0.30. |
| Missing Authorization vulnerability in WP User Manager WP User Manager wp-user-manager allows Manipulating User State.This issue affects WP User Manager: from n/a through 2.9.25. |
| The SUMIT Payment Gateway for WooCommerce WordPress plugin before 4.0.0 does not bind the payment it confirms with the provider to the order being completed, nor check the payment amount against the order total, allowing unauthenticated users to mark a pending order as paid by replaying a payment identifier obtained from any single genuine payment. |
| The SmartyParcel WordPress plugin before 1.23.4 does not perform authorisation checks when deleting shipping label records, allowing any authenticated user such as a subscriber to delete the shipping label and tracking records of arbitrary orders store-wide. |
| Missing Authorization vulnerability in WP User Manager WP User Manager wp-user-manager allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP User Manager: from n/a through 2.9.24. |
| Missing Authorization vulnerability in Arraytics WP Event Solution wp-event-solution allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP Event Solution: from n/a through 4.1.12. |
| Vulnerability in the Oracle Agile Product Lifecycle Management for Process product of Oracle Supply Chain (component: Product Quality Management). The supported version that is affected is 6.2.4. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Agile Product Lifecycle Management for Process. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle Agile Product Lifecycle Management for Process, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Agile Product Lifecycle Management for Process accessible data as well as unauthorized read access to a subset of Oracle Agile Product Lifecycle Management for Process accessible data. CVSS 3.1 Base Score 5.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N). |
| Vulnerability in the Oracle Agile PLM product of Oracle Supply Chain (component: Application Server). The supported version that is affected is 9.3.6. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Agile PLM. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in takeover of Oracle Agile PLM. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:H/A:H). |
| Vulnerability in the Oracle Materials Requirement Planning product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Materials Requirement Planning. Successful attacks of this vulnerability can result in takeover of Oracle Materials Requirement Planning. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Mailu is a mail server distributed as a set of Docker images. Prior to f05aeb8322e2f61096af6b089d61ba6f40587d96, domain managers can enable spoofing for hosted domains they do not control. A potentially malicious domain administrator enables spoofing for another hosted domain and can send emails that are authenticated with DKIM/SPF for domains they should not be able to. This vulnerability is addressed by f05aeb8322e2f61096af6b089d61ba6f40587d96. |
