| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Libevent is an event notification library. Prior to 2.1.13 and 2.2.2-alpha, libevent has an off-by-one stack buffer overflow in evdns.c when dnsname_to_labels formats a name-bearing DNS record at the end of the 64 KB stack buffer allocated by evdns_server_request_format_response. The final-label check permits j plus label_len plus one to equal buf_len, after which the terminating null byte is written to buf[buf_len]. A crafted DNS server response containing PTR, CNAME, MX, NS, or SOA data can trigger the one-byte out-of-bounds write and crash or corrupt the process. This issue is fixed in versions 2.1.13 and 2.2.2-alpha. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.12, a reachable assertion failure in the HTJ2K decode path allows a crafted HTJ2K-compressed EXR file to cause an unconditional process abort in any application that calls exr_start_read() on untrusted input, resulting in denial of service. The crash is triggered by a QCD marker whose lower five bits are zero, which OpenEXR passes into the vendored OpenJPH library while constructing the codestream and evaluating its quantization delta parameters. OpenJPH uses an assertion rather than a recoverable error to validate those bits, so any invalid value calls abort() directly and cannot be intercepted by surrounding error handling, a problem compounded by OpenEXR wrapping only its internal HT header parser in error handling while leaving the later codestream read and construction calls unprotected. This issue has been resolved in version 3.4.13. |
| Integer overflow in the Graphics component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (ltc4282) Clamp negative current limits
When a negative value is passed to ltc4282_write_curr(), the signed long
val is cast directly to u64:
drivers/hwmon/ltc4282.c:ltc4282_write_curr() {
/* need to pass it in millivolt */
u32 in = DIV_ROUND_CLOSEST_ULL((u64)val * st->rsense, DECA * MICRO);
...
}
This cast converts negative inputs into large positive values. The
subsequent division result overflows the u32 in variable, truncating
to a pseudo-random positive value. When this is passed to
ltc4282_write_voltage_byte(), it is clamped to the maximum limit instead
of zero.
Clamp val to 0 and to the maximum supported upper limit before the cast
and assign the result to a 64-bit temporary variable before the division
to avoid the underflow and an also possible overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: Validate T10 PI scatterlist counts
When T10 PI is negotiated, vhost-scsi splits protection bytes from
the data iterator before mapping the request scatterlists. A malformed
request can claim protection bytes that cover or exceed the full payload
length. The former leaves no data bytes to map, while the latter
underflows exp_data_len before advancing the iterator. Both cases can let
a zero data SGL count reach sg_alloc_table_chained(), which triggers
BUG_ON(!nents).
Reject protection lengths that cover or exceed the payload before
subtracting prot_bytes and advancing the iterator. Also propagate
negative errors from the protection SGL calculation before calling the
allocator, matching the data SGL path. |
| IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 through OP940.81 (Power HMC) is affected by a vulnerability in the interface between the BMC/FSP and the host system. An attacker with service account or root access to the BMC/FSP can read and write arbitrary regions of host system memory, giving full control over the host system and all hosted partitions, resulting in a confidentiality, integrity, and availability impact. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary code due to an integer underflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service and potentially disclose sensitive information due to an integer underflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an integer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to an integer overflow during size computation. |
| Integer wraparound in multiple PostgreSQL server features allows an unprivileged database user to cause the server to undersize an allocation and write out-of-bounds. This may execute arbitrary code as the operating system user running the database. In applications that pass gigabyte-scale user inputs to the relevant database functions, the application input provider may achieve a segmentation fault. Versions before PostgreSQL 18.4, 17.10, 16.14, 15.18, and 14.23 are affected. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an improper calculation of a memory offset during IPsec decapsulation. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an integer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an integer underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/dp/mst: fix buffer overflows in sideband chunk accumulation
drm_dp_sideband_append_payload() has three related bugs when processing
device-provided sideband reply data:
1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken
directly from the DP sideband header. If a device sends msg_len=0,
curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len)
is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow).
drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy()
writes 255 bytes into msg[], both far out of bounds.
2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is
only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks
until curchunk_idx reaches curchunk_len, writing up to 15 bytes past
the end of chunk[] into msg[].
3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to
msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256],
so the memcpy can spill into adjacent struct fields.
All three are reachable from any DP MST device that can forge sideband
reply messages on a physical connection. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
afu_ioctl_dma_map() accepts a 64-bit length from userspace via
DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value
is passed to afu_dma_pin_pages() where npages is derived as
length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes
int nr_pages, causing implicit truncation if length is very large.
Validate map.length at the ioctl entry point before calling
afu_dma_map_region(), rejecting values whose page count exceeds
INT_MAX. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Use unsigned int for ndp_index
The variable ndp_index is declared as a signed integer, but it stores
the return value of get_ncm(), which is unsigned.
A malicious host can supply a large offset that overflows the signed
ndp_index, making it negative. Because ndp_index is compared against
unsigned bounds, this negative value bypasses sanity checks and leads
to an out-of-bounds read when calculating the address of the NDP
block (ntb_ptr + ndp_index).
Fix this by changing ndp_index to unsigned int to ensure consistent
unsigned comparisons throughout the function. |
| Relative path traversal in Windows DNS allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: fix off-by-one in BD ring consumption on build_skb failure
qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a
NULL return from qede_build_skb(). When it returns NULL under memory
pressure, the functions still consume a BD from the ring before
returning NULL. The callers then recycle additional BDs, resulting in
one extra BD being consumed (off-by-one). This desynchronizes the BD
ring, which can corrupt DMA page reference counts and lead to SLUB
freelist corruption.
Commit 4e910dbe3650 ("qede: confirm skb is allocated before using")
added a NULL check inside qede_build_skb() to prevent a NULL pointer
dereference, but did not address the missing NULL checks in the
callers, making this off-by-one reachable.
Fix this by adding NULL checks for the return value of
qede_build_skb() in both qede_rx_build_skb() and
qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring
manipulation. |
| Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.15.0, an unauthenticated remote client can send a STUN message over TCP or TLS with a body-length field from 65520 through 65532, causing the uint16_t len variable in stun_get_message_len_str() in src/client/ns_turn_msg.c to wrap when STUN_HEADER_LENGTH is added. The framing layer then consumes only 4 through 16 bytes, treats the remaining bytes as another message, desynchronizes the stream parser, and drops the attacking client's connection. Other clients and the server process are not affected. This issue is fixed in version 4.15.0. |
