| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A denial of service vulnerability exists in the NetX Component HTTP server functionality of STMicroelectronics X-CUBE-AZRTOS-WL 2.0.0. A specially crafted network packet can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability.This vulnerability affects X-CUBE-AZRTOS-F7 NetX Duo Web Component HTTP server v 1.1.0. This HTTP server implementation is contained in this file - x-cube-azrtos-f7\Middlewares\ST\netxduo\addons\web\nx_web_http_server.c |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: unregister xdp rxq info in the reset path
vmxnet3 does not unregister xdp rxq info in the
vmxnet3_reset_work() code path as vmxnet3_rq_destroy()
is not invoked in this code path. So, we get below message with a
backtrace.
Missing unregister, handled but fix driver
WARNING: CPU:48 PID: 500 at net/core/xdp.c:182
__xdp_rxq_info_reg+0x93/0xf0
This patch fixes the problem by moving the unregister
code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup(). |
| Form validation popups could capture escape key presses. Therefore, spamming form validation messages could be used to prevent users from exiting full-screen mode. This vulnerability affects Firefox < 128 and Thunderbird < 128. |
| Incomplete Cleanup vulnerability in Apache Tomcat.
The internal fork of Commons FileUpload packaged with Apache Tomcat 9.0.70 through 9.0.80 and 8.5.85 through 8.5.93 included an unreleased,
in progress refactoring that exposed a potential denial of service on
Windows if a web application opened a stream for an uploaded file but
failed to close the stream. The file would never be deleted from disk
creating the possibility of an eventual denial of service due to the
disk being full.
Other, EOL versions may also be affected.
Users are recommended to upgrade to version 9.0.81 onwards or 8.5.94 onwards, which fixes the issue. |
| Incomplete Cleanup vulnerability in Apache Tomcat.When recycling various internal objects in Apache Tomcat from 11.0.0-M1 through 11.0.0-M11, from 10.1.0-M1 through 10.1.13, from 9.0.0-M1 through 9.0.80 and from 8.5.0 through 8.5.93, an error could
cause Tomcat to skip some parts of the recycling process leading to
information leaking from the current request/response to the next.
Older, EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.0-M12 onwards, 10.1.14 onwards, 9.0.81 onwards or 8.5.94 onwards, which fixes the issue. |
| Denial of Service via incomplete cleanup vulnerability in Apache Tomcat. It was possible for WebSocket clients to keep WebSocket connections open leading to increased resource consumption.This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M16, from 10.1.0-M1 through 10.1.18, from 9.0.0-M1 through 9.0.85, from 8.5.0 through 8.5.98.
Older, EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.0-M17, 10.1.19, 9.0.86 or 8.5.99 which fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: core: fix cleanup after dev_set_name()
If dev_set_name() fails, we leak nvmem->wp_gpio as the cleanup does not
put this. While a minimal fix for this would be to add the gpiod_put()
call, we can do better if we split device_register(), and use the
tested nvmem_release() cleanup code by initialising the device early,
and putting the device.
This results in a slightly larger fix, but results in clear code.
Note: this patch depends on "nvmem: core: initialise nvmem->id early"
and "nvmem: core: remove nvmem_config wp_gpio".
[Srini: Fixed subject line and error code handing with wp_gpio while applying.] |
| PerfreeBlog v4.0.11 has an arbitrary file deletion vulnerability in the unInstallTheme function |
| In the Linux kernel, the following vulnerability has been resolved:
net: micrel: Fix receiving the timestamp in the frame for lan8841
The blamed commit started to use the ptp workqueue to get the second
part of the timestamp. And when the port was set down, then this
workqueue is stopped. But if the config option NETWORK_PHY_TIMESTAMPING
is not enabled, then the ptp_clock is not initialized so then it would
crash when it would try to access the delayed work.
So then basically by setting up and then down the port, it would crash.
The fix consists in checking if the ptp_clock is initialized and only
then cancel the delayed work. |
| OpenCV is an Open Source Computer Vision Library. Versions 4.10.0 and 4.11.0 have an uninitialized pointer variable on stack that may lead to arbitrary heap buffer write when reading crafted JPEG images. Version 4.12.0 fixes the vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: hisi_sas: Free irq vectors in order for v3 HW
If the driver probe fails to request the channel IRQ or fatal IRQ, the
driver will free the IRQ vectors before freeing the IRQs in free_irq(),
and this will cause a kernel BUG like this:
------------[ cut here ]------------
kernel BUG at drivers/pci/msi.c:369!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Call trace:
free_msi_irqs+0x118/0x13c
pci_disable_msi+0xfc/0x120
pci_free_irq_vectors+0x24/0x3c
hisi_sas_v3_probe+0x360/0x9d0 [hisi_sas_v3_hw]
local_pci_probe+0x44/0xb0
work_for_cpu_fn+0x20/0x34
process_one_work+0x1d0/0x340
worker_thread+0x2e0/0x460
kthread+0x180/0x190
ret_from_fork+0x10/0x20
---[ end trace b88990335b610c11 ]---
So we use devm_add_action() to control the order in which we free the
vectors. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix finding a last resort AG in xfs_filestream_pick_ag
When the main loop in xfs_filestream_pick_ag fails to find a suitable
AG it tries to just pick the online AG. But the loop for that uses
args->pag as loop iterator while the later code expects pag to be
set. Fix this by reusing the max_pag case for this last resort, and
also add a check for impossible case of no AG just to make sure that
the uninitialized pag doesn't even escape in theory. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Check pat.ops before dumping PAT settings
We may leave pat.ops unset when running on brand new platform or
when running as a VF. While the former is unlikely, the latter
is valid (future) use case and will cause NPD when someone will
try to dump PAT settings by debugfs.
It's better to check pointer to pat.ops instead of specific .dump
hook, as we have this hook always defined for every .ops variant. |
| In Xpdf 4.05 (and earlier), invalid header info in a DCT (JPEG) stream can lead to an uninitialized variable in the DCT decoder. The proof-of-concept PDF file causes a segfault attempting to read from an invalid address. |
| A content spoofing vulnerability exists in multiple WSO2 products due to improper error message handling. Under certain conditions, error messages are passed through URL parameters without validation, allowing malicious actors to inject arbitrary content into the UI.
By exploiting this vulnerability, attackers can manipulate browser-displayed error messages, enabling social engineering attacks through deceptive or misleading content. |
| In OpenBSD 7.5 before errata 008 and OpenBSD 7.4 before errata 021,
avoid possible mbuf double free in NFS client and server implementation, do not use uninitialized variable in error handling of NFS server. |
| In the Linux kernel, the following vulnerability has been resolved:
ath11k: fix kernel panic during unload/load ath11k modules
Call netif_napi_del() from ath11k_ahb_free_ext_irq() to fix
the following kernel panic when unload/load ath11k modules
for few iterations.
[ 971.201365] Unable to handle kernel paging request at virtual address 6d97a208
[ 971.204227] pgd = 594c2919
[ 971.211478] [6d97a208] *pgd=00000000
[ 971.214120] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[ 971.412024] CPU: 2 PID: 4435 Comm: insmod Not tainted 5.4.89 #0
[ 971.434256] Hardware name: Generic DT based system
[ 971.440165] PC is at napi_by_id+0x10/0x40
[ 971.445019] LR is at netif_napi_add+0x160/0x1dc
[ 971.743127] (napi_by_id) from [<807d89a0>] (netif_napi_add+0x160/0x1dc)
[ 971.751295] (netif_napi_add) from [<7f1209ac>] (ath11k_ahb_config_irq+0xf8/0x414 [ath11k_ahb])
[ 971.759164] (ath11k_ahb_config_irq [ath11k_ahb]) from [<7f12135c>] (ath11k_ahb_probe+0x40c/0x51c [ath11k_ahb])
[ 971.768567] (ath11k_ahb_probe [ath11k_ahb]) from [<80666864>] (platform_drv_probe+0x48/0x94)
[ 971.779670] (platform_drv_probe) from [<80664718>] (really_probe+0x1c8/0x450)
[ 971.789389] (really_probe) from [<80664cc4>] (driver_probe_device+0x15c/0x1b8)
[ 971.797547] (driver_probe_device) from [<80664f60>] (device_driver_attach+0x44/0x60)
[ 971.805795] (device_driver_attach) from [<806650a0>] (__driver_attach+0x124/0x140)
[ 971.814822] (__driver_attach) from [<80662adc>] (bus_for_each_dev+0x58/0xa4)
[ 971.823328] (bus_for_each_dev) from [<80663a2c>] (bus_add_driver+0xf0/0x1e8)
[ 971.831662] (bus_add_driver) from [<806658a4>] (driver_register+0xa8/0xf0)
[ 971.839822] (driver_register) from [<8030269c>] (do_one_initcall+0x78/0x1ac)
[ 971.847638] (do_one_initcall) from [<80392524>] (do_init_module+0x54/0x200)
[ 971.855968] (do_init_module) from [<803945b0>] (load_module+0x1e30/0x1ffc)
[ 971.864126] (load_module) from [<803948b0>] (sys_init_module+0x134/0x17c)
[ 971.871852] (sys_init_module) from [<80301000>] (ret_fast_syscall+0x0/0x50)
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.6.0.1-00760-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix kernel crash when devlink reload during initialization
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash.
This patch fixes this by registering the devlink after
hardware initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-msm: pervent access to suspended controller
Generic sdhci code registers LED device and uses host->runtime_suspended
flag to protect access to it. The sdhci-msm driver doesn't set this flag,
which causes a crash when LED is accessed while controller is runtime
suspended. Fix this by setting the flag correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Initialize the ODP xarray when creating an ODP MR
Normally the zero fill would hide the missing initialization, but an
errant set to desc_size in reg_create() causes a crash:
BUG: unable to handle page fault for address: 0000000800000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 5 PID: 890 Comm: ib_write_bw Not tainted 5.15.0-rc4+ #47
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5_ib_dereg_mr+0x14/0x3b0 [mlx5_ib]
Code: 48 63 cd 4c 89 f7 48 89 0c 24 e8 37 30 03 e1 48 8b 0c 24 eb a0 90 0f 1f 44 00 00 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 30 <48> 8b 2f 65 48 8b 04 25 28 00 00 00 48 89 44 24 28 31 c0 8b 87 c8
RSP: 0018:ffff88811afa3a60 EFLAGS: 00010286
RAX: 000000000000001c RBX: 0000000800000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000800000000
RBP: 0000000800000000 R08: 0000000000000000 R09: c0000000fffff7ff
R10: ffff88811afa38f8 R11: ffff88811afa38f0 R12: ffffffffa02c7ac0
R13: 0000000000000000 R14: ffff88811afa3cd8 R15: ffff88810772fa00
FS: 00007f47b9080740(0000) GS:ffff88852cd40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000800000000 CR3: 000000010761e003 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
mlx5_ib_free_odp_mr+0x95/0xc0 [mlx5_ib]
mlx5_ib_dereg_mr+0x128/0x3b0 [mlx5_ib]
ib_dereg_mr_user+0x45/0xb0 [ib_core]
? xas_load+0x8/0x80
destroy_hw_idr_uobject+0x1a/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x2f/0x150 [ib_uverbs]
uobj_destroy+0x3c/0x70 [ib_uverbs]
ib_uverbs_cmd_verbs+0x467/0xb00 [ib_uverbs]
? uverbs_finalize_object+0x60/0x60 [ib_uverbs]
? ttwu_queue_wakelist+0xa9/0xe0
? pty_write+0x85/0x90
? file_tty_write.isra.33+0x214/0x330
? process_echoes+0x60/0x60
ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs]
__x64_sys_ioctl+0x10d/0x8e0
? vfs_write+0x17f/0x260
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Add the missing xarray initialization and remove the desc_size set. |
