| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: guard flow control update with global_tx_fc in buffer switching
mvpp2_bm_switch_buffers() unconditionally calls
mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and
shared buffer pool modes. This function programs CM3 flow control
registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference
priv->cm3_base without any NULL check.
When the CM3 SRAM resource is not present in the device tree (the
third reg entry added by commit 60523583b07c ("dts: marvell: add CM3
SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains
NULL and priv->global_tx_fc is false. Any operation that triggers
mvpp2_bm_switch_buffers(), for example an MTU change that crosses
the jumbo frame threshold, will crash:
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
pc : readl+0x0/0x18
lr : mvpp2_cm3_read.isra.0+0x14/0x20
Call trace:
readl+0x0/0x18
mvpp2_bm_pool_update_fc+0x40/0x12c
mvpp2_bm_pool_update_priv_fc+0x94/0xd8
mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0
mvpp2_change_mtu+0x140/0x380
__dev_set_mtu+0x1c/0x38
dev_set_mtu_ext+0x78/0x118
dev_set_mtu+0x48/0xa8
dev_ifsioc+0x21c/0x43c
dev_ioctl+0x2d8/0x42c
sock_ioctl+0x314/0x378
Every other flow control call site in the driver already guards
hardware access with either priv->global_tx_fc or port->tx_fc.
mvpp2_bm_switch_buffers() is the only place that omits this check.
Add the missing priv->global_tx_fc guard to both the disable and
re-enable calls in mvpp2_bm_switch_buffers(), consistent with the
rest of the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL deref in mesh_matches_local()
mesh_matches_local() unconditionally dereferences ie->mesh_config to
compare mesh configuration parameters. When called from
mesh_rx_csa_frame(), the parsed action-frame elements may not contain a
Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a
kernel NULL pointer dereference.
The other two callers are already safe:
- ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before
calling mesh_matches_local()
- mesh_plink_get_event() is only reached through
mesh_process_plink_frame(), which checks !elems->mesh_config, too
mesh_rx_csa_frame() is the only caller that passes raw parsed elements
to mesh_matches_local() without guarding mesh_config. An adjacent
attacker can exploit this by sending a crafted CSA action frame that
includes a valid Mesh ID IE but omits the Mesh Configuration IE,
crashing the kernel.
The captured crash log:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events_unbound cfg80211_wiphy_work
[...]
Call Trace:
<TASK>
? __pfx_mesh_matches_local (net/mac80211/mesh.c:65)
ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686)
[...]
ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802)
[...]
cfg80211_wiphy_work (net/wireless/core.c:426)
process_one_work (net/kernel/workqueue.c:3280)
? assign_work (net/kernel/workqueue.c:1219)
worker_thread (net/kernel/workqueue.c:3352)
? __pfx_worker_thread (net/kernel/workqueue.c:3385)
kthread (net/kernel/kthread.c:436)
[...]
ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255)
</TASK>
This patch adds a NULL check for ie->mesh_config at the top of
mesh_matches_local() to return false early when the Mesh Configuration
IE is absent. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame()
In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced
at lines 1638 and 1642 without a prior NULL check:
ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl;
...
pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value);
The mesh_matches_local() check above only validates the Mesh ID,
Mesh Configuration, and Supported Rates IEs. It does not verify the
presence of the Mesh Channel Switch Parameters IE (element ID 118).
When a received CSA action frame omits that IE, ieee802_11_parse_elems()
leaves elems->mesh_chansw_params_ie as NULL, and the unconditional
dereference causes a kernel NULL pointer dereference.
A remote mesh peer with an established peer link (PLINK_ESTAB) can
trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame
that includes a matching Mesh ID and Mesh Configuration IE but omits the
Mesh Channel Switch Parameters IE. No authentication beyond the default
open mesh peering is required.
Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211]
CR2: 0000000000000000
Fix by adding a NULL check for mesh_chansw_params_ie after
mesh_matches_local() returns, consistent with how other optional IEs
are guarded throughout the mesh code.
The bug has been present since v3.13 (released 2014-01-19). |
| In the Linux kernel, the following vulnerability has been resolved:
be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list
When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is
set to false, the driver may request the PMAC_ID from the firmware of the
network card, and this function will store that PMAC_ID at the provided
address pmac_id. This is the contract of this function.
However, there is a location within the driver where both
pmac_id_valid == false and pmac_id == NULL are being passed. This could
result in dereferencing a NULL pointer.
To resolve this issue, it is necessary to pass the address of a stub
variable to the function. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - reject too-short AAD (assoclen<8) to match ESP/ESN spec
authencesn assumes an ESP/ESN-formatted AAD. When assoclen is shorter than
the minimum expected length, crypto_authenc_esn_decrypt() can advance past
the end of the destination scatterlist and trigger a NULL pointer dereference
in scatterwalk_map_and_copy(), leading to a kernel panic (DoS).
Add a minimum AAD length check to fail fast on invalid inputs. |
| In the Linux kernel, the following vulnerability has been resolved:
net: marvell: prestera: fix NULL dereference on devlink_alloc() failure
devlink_alloc() may return NULL on allocation failure, but
prestera_devlink_alloc() unconditionally calls devlink_priv() on
the returned pointer.
This leads to a NULL pointer dereference if devlink allocation fails.
Add a check for a NULL devlink pointer and return NULL early to avoid
the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mscc: ocelot: Fix crash when adding interface under a lag
Commit 15faa1f67ab4 ("lan966x: Fix crash when adding interface under a lag")
fixed a similar issue in the lan966x driver caused by a NULL pointer dereference.
The ocelot_set_aggr_pgids() function in the ocelot driver has similar logic
and is susceptible to the same crash.
This issue specifically affects the ocelot_vsc7514.c frontend, which leaves
unused ports as NULL pointers. The felix_vsc9959.c frontend is unaffected as
it uses the DSA framework which registers all ports.
Fix this by checking if the port pointer is valid before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: svcauth_gss: avoid NULL deref on zero length gss_token in gss_read_proxy_verf
A zero length gss_token results in pages == 0 and in_token->pages[0]
is NULL. The code unconditionally evaluates
page_address(in_token->pages[0]) for the initial memcpy, which can
dereference NULL even when the copy length is 0. Guard the first
memcpy so it only runs when length > 0. |
| In the Linux kernel, the following vulnerability has been resolved:
net: clear the dst when changing skb protocol
A not-so-careful NAT46 BPF program can crash the kernel
if it indiscriminately flips ingress packets from v4 to v6:
BUG: kernel NULL pointer dereference, address: 0000000000000000
ip6_rcv_core (net/ipv6/ip6_input.c:190:20)
ipv6_rcv (net/ipv6/ip6_input.c:306:8)
process_backlog (net/core/dev.c:6186:4)
napi_poll (net/core/dev.c:6906:9)
net_rx_action (net/core/dev.c:7028:13)
do_softirq (kernel/softirq.c:462:3)
netif_rx (net/core/dev.c:5326:3)
dev_loopback_xmit (net/core/dev.c:4015:2)
ip_mc_finish_output (net/ipv4/ip_output.c:363:8)
NF_HOOK (./include/linux/netfilter.h:314:9)
ip_mc_output (net/ipv4/ip_output.c:400:5)
dst_output (./include/net/dst.h:459:9)
ip_local_out (net/ipv4/ip_output.c:130:9)
ip_send_skb (net/ipv4/ip_output.c:1496:8)
udp_send_skb (net/ipv4/udp.c:1040:8)
udp_sendmsg (net/ipv4/udp.c:1328:10)
The output interface has a 4->6 program attached at ingress.
We try to loop the multicast skb back to the sending socket.
Ingress BPF runs as part of netif_rx(), pushes a valid v6 hdr
and changes skb->protocol to v6. We enter ip6_rcv_core which
tries to use skb_dst(). But the dst is still an IPv4 one left
after IPv4 mcast output.
Clear the dst in all BPF helpers which change the protocol.
Try to preserve metadata dsts, those may carry non-routing
metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: mtk-pmic-keys - fix possible null pointer dereference
In mtk_pmic_keys_probe, the regs parameter is only set if the button is
parsed in the device tree. However, on hardware where the button is left
floating, that node will most likely be removed not to enable that
input. In that case the code will try to dereference a null pointer.
Let's use the regs struct instead as it is defined for all supported
platforms. Note that it is ok setting the key reg even if that latter is
disabled as the interrupt won't be enabled anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: int340x: Add NULL check for adev
Not all devices have an ACPI companion fwnode, so adev might be NULL.
This is similar to the commit cd2fd6eab480
("platform/x86: int3472: Check for adev == NULL").
Add a check for adev not being set and return -ENODEV in that case to
avoid a possible NULL pointer deref in int3402_thermal_probe().
Note, under the same directory, int3400_thermal_probe() has such a
check.
[ rjw: Subject edit, added Fixes: ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate: fix shmem xarray update during migration
A shmem folio can be either in page cache or in swap cache, but not at the
same time. Namely, once it is in swap cache, folio->mapping should be
NULL, and the folio is no longer in a shmem mapping.
In __folio_migrate_mapping(), to determine the number of xarray entries to
update, folio_test_swapbacked() is used, but that conflates shmem in page
cache case and shmem in swap cache case. It leads to xarray multi-index
entry corruption, since it turns a sibling entry to a normal entry during
xas_store() (see [1] for a userspace reproduction). Fix it by only using
folio_test_swapcache() to determine whether xarray is storing swap cache
entries or not to choose the right number of xarray entries to update.
[1] https://lore.kernel.org/linux-mm/Z8idPCkaJW1IChjT@casper.infradead.org/
Note:
In __split_huge_page(), folio_test_anon() && folio_test_swapcache() is
used to get swap_cache address space, but that ignores the shmem folio in
swap cache case. It could lead to NULL pointer dereferencing when a
in-swap-cache shmem folio is split at __xa_store(), since
!folio_test_anon() is true and folio->mapping is NULL. But fortunately,
its caller split_huge_page_to_list_to_order() bails out early with EBUSY
when folio->mapping is NULL. So no need to take care of it here. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: drop secpath at the same time as we currently drop dst
Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while
running tests that boil down to:
- create a pair of netns
- run a basic TCP test over ipcomp6
- delete the pair of netns
The xfrm_state found on spi_byaddr was not deleted at the time we
delete the netns, because we still have a reference on it. This
lingering reference comes from a secpath (which holds a ref on the
xfrm_state), which is still attached to an skb. This skb is not
leaked, it ends up on sk_receive_queue and then gets defer-free'd by
skb_attempt_defer_free.
The problem happens when we defer freeing an skb (push it on one CPU's
defer_list), and don't flush that list before the netns is deleted. In
that case, we still have a reference on the xfrm_state that we don't
expect at this point.
We already drop the skb's dst in the TCP receive path when it's no
longer needed, so let's also drop the secpath. At this point,
tcp_filter has already called into the LSM hooks that may require the
secpath, so it should not be needed anymore. However, in some of those
places, the MPTCP extension has just been attached to the skb, so we
cannot simply drop all extensions. |
| In the Linux kernel, the following vulnerability has been resolved:
acct: perform last write from workqueue
In [1] it was reported that the acct(2) system call can be used to
trigger NULL deref in cases where it is set to write to a file that
triggers an internal lookup. This can e.g., happen when pointing acc(2)
to /sys/power/resume. At the point the where the write to this file
happens the calling task has already exited and called exit_fs(). A
lookup will thus trigger a NULL-deref when accessing current->fs.
Reorganize the code so that the the final write happens from the
workqueue but with the caller's credentials. This preserves the
(strange) permission model and has almost no regression risk.
This api should stop to exist though. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: Add check for next_buffer in receive_encrypted_standard()
Add check for the return value of cifs_buf_get() and cifs_small_buf_get()
in receive_encrypted_standard() to prevent null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: check vxlan_vnigroup_init() return value
vxlan_init() must check vxlan_vnigroup_init() success
otherwise a crash happens later, spotted by syzbot.
Oops: general protection fault, probably for non-canonical address 0xdffffc000000002c: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000160-0x0000000000000167]
CPU: 0 UID: 0 PID: 7313 Comm: syz-executor147 Not tainted 6.14.0-rc1-syzkaller-00276-g69b54314c975 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:vxlan_vnigroup_uninit+0x89/0x500 drivers/net/vxlan/vxlan_vnifilter.c:912
Code: 00 48 8b 44 24 08 4c 8b b0 98 41 00 00 49 8d 86 60 01 00 00 48 89 c2 48 89 44 24 10 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4d 04 00 00 49 8b 86 60 01 00 00 48 ba 00 00 00
RSP: 0018:ffffc9000cc1eea8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000001 RCX: ffffffff8672effb
RDX: 000000000000002c RSI: ffffffff8672ecb9 RDI: ffff8880461b4f18
RBP: ffff8880461b4ef4 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000020000
R13: ffff8880461b0d80 R14: 0000000000000000 R15: dffffc0000000000
FS: 00007fecfa95d6c0(0000) GS:ffff88806a600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fecfa95cfb8 CR3: 000000004472c000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
vxlan_uninit+0x1ab/0x200 drivers/net/vxlan/vxlan_core.c:2942
unregister_netdevice_many_notify+0x12d6/0x1f30 net/core/dev.c:11824
unregister_netdevice_many net/core/dev.c:11866 [inline]
unregister_netdevice_queue+0x307/0x3f0 net/core/dev.c:11736
register_netdevice+0x1829/0x1eb0 net/core/dev.c:10901
__vxlan_dev_create+0x7c6/0xa30 drivers/net/vxlan/vxlan_core.c:3981
vxlan_newlink+0xd1/0x130 drivers/net/vxlan/vxlan_core.c:4407
rtnl_newlink_create net/core/rtnetlink.c:3795 [inline]
__rtnl_newlink net/core/rtnetlink.c:3906 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: always recalculate features after XDP clearing, fix null-deref
Recalculate features when XDP is detached.
Before:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: off [requested on]
After:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: on
The fact that HW-GRO doesn't get re-enabled automatically is just
a minor annoyance. The real issue is that the features will randomly
come back during another reconfiguration which just happens to invoke
netdev_update_features(). The driver doesn't handle reconfiguring
two things at a time very robustly.
Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") we only reconfigure the RSS hash table
if the "effective" number of Rx rings has changed. If HW-GRO is
enabled "effective" number of rings is 2x what user sees.
So if we are in the bad state, with HW-GRO re-enablement "pending"
after XDP off, and we lower the rings by / 2 - the HW-GRO rings
doing 2x and the ethtool -L doing / 2 may cancel each other out,
and the:
if (old_rx_rings != bp->hw_resc.resv_rx_rings &&
condition in __bnxt_reserve_rings() will be false.
The RSS map won't get updated, and we'll crash with:
BUG: kernel NULL pointer dereference, address: 0000000000000168
RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0
bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180
__bnxt_setup_vnic_p5+0x58/0x110
bnxt_init_nic+0xb72/0xf50
__bnxt_open_nic+0x40d/0xab0
bnxt_open_nic+0x2b/0x60
ethtool_set_channels+0x18c/0x1d0
As we try to access a freed ring.
The issue is present since XDP support was added, really, but
prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") it wasn't causing major issues. |
| In the Linux kernel, the following vulnerability has been resolved:
net: fec: handle page_pool_dev_alloc_pages error
The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did
not handle the case when it returned NULL. There was a WARN_ON(!new_page)
but it would still proceed to use the NULL pointer and then crash.
This case does seem somewhat rare but when the system is under memory
pressure it can happen. One case where I can duplicate this with some
frequency is when writing over a smbd share to a SATA HDD attached to an
imx6q.
Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve
the problem for my test case. But it still seems wrong that the fec driver
ignores the memory allocation error and can crash.
This commit handles the allocation error by dropping the current packet. |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: fix dev_pm_opp_find_bw_*() when bandwidth table not initialized
If a driver calls dev_pm_opp_find_bw_ceil/floor() the retrieve bandwidth
from the OPP table but the bandwidth table was not created because the
interconnect properties were missing in the OPP consumer node, the
kernel will crash with:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
...
pc : _read_bw+0x8/0x10
lr : _opp_table_find_key+0x9c/0x174
...
Call trace:
_read_bw+0x8/0x10 (P)
_opp_table_find_key+0x9c/0x174 (L)
_find_key+0x98/0x168
dev_pm_opp_find_bw_ceil+0x50/0x88
...
In order to fix the crash, create an assert function to check
if the bandwidth table was created before trying to get a
bandwidth with _read_bw(). |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: skip dumping tnc tree when zroot is null
Clearing slab cache will free all znode in memory and make
c->zroot.znode = NULL, then dumping tnc tree will access
c->zroot.znode which cause null pointer dereference. |
