| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in GCC. An out-of-bounds memory access vulnerability exists in the libstdc++ parallel search implementation due to an undersized internal buffer. A local attacker can exploit this flaw by providing crafted search data to an application compiled with parallel mode, causing the process to crash and leading to a Denial of Service (DoS). |
| SQLite before 3.54.0 built with FTS5 contains a heap buffer overflow in fts5DoSecureDelete() that allows attackers to write past the leaf page buffer via crafted footer key offsets. Attackers can supply a database file with a corrupted FTS5 index that, when deleted from with secure-delete enabled, corrupts heap memory and crashes the application. |
| snappy-java is a Java port of the snappy, a fast C++ compresser/decompresser developed by Google. Prior to 1.1.10.9, Snappy.arrayCopy(Object src, int offset, int byteLength, Object dest, int destOffset) passes caller-supplied ranges to native memcpy without validating either array, allowing negative or oversized byteLength and offset values to read or write outside array bounds and crash the JVM. SnappyOutputStream.rawWrite and SnappyInputStream.rawRead, including their typed-array write and read methods, pass caller-controlled ranges through this primitive, and typed-array byte-size calculations can overflow int. This issue is fixed in version 1.1.10.9. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mct_u232: fix memory corruption with small endpoint
The driver overrides the maximum transfer size for a specific device
which only accepts 16 byte packets for its 32 byte bulk-out endpoint.
Make sure to never increase the maximum transfer size to prevent slab
corruption should a malicious device report a smaller endpoint max
packet size than expected. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: mxuport: fix memory corruption with small endpoint
Make sure that the bulk-out endpoint max packet size is at least eight
bytes to avoid user-controlled slab corruption should a malicious device
report a smaller size. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix memory corruption with small endpoints
Add the missing bulk-out buffer size sanity checks to avoid
out-of-bounds memory accesses or slab corruption should a malicious
device report smaller buffers than expected. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: safe_serial: fix memory corruption with small endpoint
Make sure that the bulk-out buffer size is at least eight bytes to avoid
user-controlled slab corruption in "safe" mode should a malicious device
report a smaller size. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: cypress_m8: fix memory corruption with small endpoint
Make sure that the interrupt-out endpoint max packet size is at least
eight bytes to avoid user-controlled slab corruption or NULL-pointer
dereference should a malicious device report a smaller size. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: validate connector number in ucsi_connector_change()
The connector number in a UCSI CCI notification is a 7-bit field
supplied by the PPM. ucsi_connector_change() uses it to index the
ucsi->connector[] array without checking it against the number of
connectors the PPM reported at init time, so a buggy or malicious PPM
(EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 /
glink transports) can drive schedule_work() on memory past the end of
the array.
Reject connector numbers that are zero or exceed cap.num_connectors
before dereferencing the array. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem
When a configuration file provides an object size that is larger than the
driver's known mxt_obj_size(object), the driver intends to discard the
extra bytes.
The loop iterates using for (i = 0; i < size; i++). Inside the loop, the
condition to skip processing extra bytes is:
if (i > mxt_obj_size(object))
continue;
Since i is a 0-based index, the valid indices for the object are 0 through
mxt_obj_size(object) - 1.
When i == mxt_obj_size(object), the condition evaluates to false, and the
code processes the byte instead of discarding it.
This causes the code to calculate byte_offset = reg + i - cfg->start_ofs
and writes the byte there, overwriting exactly one byte of the adjacent
instance or object.
Update the boundary check to skip extra bytes correctly by using >=. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: omninet: fix memory corruption with small endpoint
Make sure that the bulk-out buffers are at least as large as the
hardcoded transfer size to avoid user-controlled slab corruption should
a malicious device report a smaller endpoint max packet size than
expected. |
| The Redis server command parser in Apache bRPC accepts an empty RESP array as a command header. A remote unauthenticated attacker who can reach a bRPC server with Redis service enabled can send an empty array header followed by a bulk string, causing an out-of-bounds write in the parser and crashing the process.
Root Cause:
RedisCommandParser::ConsumeImpl rejected negative RESP array counts but accepted zero. It resized the command argument vector to zero elements and continued parsing. When a following bulk string was parsed, the only index guard was a CHECK. In configurations where fatal logs do not abort immediately, execution could continue and write to _args[0] even though the vector was empty.
Affected Scenarios:
Deployments that enable ServerOptions.redis_service and accept Redis protocol traffic from untrusted clients. The issue is reached during parsing before command handling or authentication.
How to Fix:
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3354
Note:
The fix rejects empty RESP arrays as invalid Redis commands and replaces the internal index CHECK with an explicit parse error so malformed command streams cannot fall through to an indexed vector write. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: bsg: Pass reply_len to bsg_setup_queue() to fit UFS ARPMB replies
bsg-lib allocates a 96-byte (SCSI_SENSE_BUFFERSIZE) reply buffer per
job, but struct ufs_rpmb_reply is 104 bytes: a 40-byte struct
ufs_bsg_reply followed by a 64-byte EHS. When an Advanced RPMB command
returns an EHS, ufshcd_advanced_rpmb_req_handler() copies it right after
the 40-byte header and writes 8 bytes past the end of the buffer.
Let each BSG transport pass its reply buffer size to bsg_setup_queue()
and have ufs_bsg request sizeof(struct ufs_rpmb_reply), so the full
reply reaches user space. Other transports keep SCSI_SENSE_BUFFERSIZE. |
| AFFLIB through 3.7.22 contains a heap out-of-bounds write vulnerability in af_get_page() that allows attackers to corrupt heap memory by supplying crafted AFF images with mismatched page and sector sizes. Attackers can set a page size larger than and not a multiple of the sector size, causing the sector zero-fill loop to write past the buffer and crash forensic tools. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix heap out-of-bounds write in krb5_authenticate()
In krb5_authenticate(), out_len is calculated to determine available
headroom in response_buf for the incoming Kerberos AP-REP token. However,
when SMB2_SESSION_SETUP is processed as a non-first element of a compounded
SMB2 request, the calculation omits work->next_smb2_rsp_hdr_off.
This causes out_len to overstate remaining buffer headroom by
the cumulative size of prior responses in the compound chain. Consequently,
the length check in ksmbd_krb5_authenticate()
(*out_len <= resp->spnego_blob_len) passes erroneously, allowing memcpy()
to write the AP-REP blob past the end of response_buf into adjacent kernel
heap memory.
Fix this by subtracting work->next_smb2_rsp_hdr_off when computing out_len,
ensuring it accurately reflects physical remaining buffer space. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: lpass-cpu: use DAI table index for playback constraints
The DAI ID is a hardware port ID and is not necessarily the index of
the corresponding entry in variant->dai_driver.
When configuring a DAI with LPAIF_I2SCTL_MODE_QUAD01, the probe code
currently uses dai_id to index variant->dai_driver. This is incorrect
for platforms where DAI IDs are sparse. For example, the IPQ806x MI2S
DAI has ID 4 while it is the only entry in the DAI driver table. If
that DAI is configured for QUAD01 and probe reaches this branch, the
code writes beyond that single entry via dai_driver[4] instead of
updating the DAI being processed.
Use the loop index i when updating the current DAI's playback channel
constraints, while retaining dai_id for indexing the hardware-port
specific playback SD-line mode array.
This fixes the incorrect DAI table access for platforms where the DAI
ID does not match its position in the driver table. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: line6: reject oversized playback packets
Each playback URB is handed a slice of out.buffer that is exactly
LINE6_ISO_PACKETS * max_packet_size_out bytes, sized from the OUT
endpoint, but the number of bytes written into that slice is never
compared against it.
submit_audio_out_urb() takes the frame count from prev_fsize, which
audio_in_callback() derived from the *IN* endpoint's received packet
length, and rescales it with the playback frame size; when prev_fsize is
still zero it synthesizes a length from the sample rate instead. On a
device declaring a large IN wMaxPacketSize and a small OUT
wMaxPacketSize, the resulting memcpy(), or the memset() when the
playback stream is idle, runs past its slice and, as the reproducer
below shows, beyond the allocation.
usb_submit_urb() is not a backstop. max_packet_size_out comes from
usb_maxpacket(), which returns only the low 11 bits of wMaxPacketSize,
while USB core validates a high-speed isochronous length against that
base scaled by usb_endpoint_maxp_mult(). A length of up to three times
the allocated slice is therefore accepted, and even a rejected URB is
only rejected after the write.
Reject a packet that does not fit the slice the driver allocated for it.
Clamping it instead would silently shorten the capture-derived rate
feedback and desynchronize the two streams.
BUG: KASAN: slab-out-of-bounds in submit_audio_out_urb (sound/usb/line6/playback.c:229)
Write of size 1024 at addr ffff888100bbd400 by task kworker/1:2/5002
Workqueue: events line6_startup_work
Call Trace:
__asan_memcpy (mm/kasan/shadow.c:106)
submit_audio_out_urb (sound/usb/line6/playback.c:229)
line6_submit_audio_out_all_urbs (sound/usb/line6/playback.c:291)
line6_stream_start (sound/usb/line6/pcm.c:194)
line6_pcm_acquire (sound/usb/line6/pcm.c:337)
line6_startup_work (sound/usb/line6/driver.c:728)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
The buggy address belongs to the object at ffff888100bbd400
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes inside of
allocated 256-byte region [ffff888100bbd400, ffff888100bbd500) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wfx: validate MIB read length before copying to caller
wfx_hif_read_mib() copies reply->length bytes from the firmware
response into the caller-provided buffer without checking that
reply->length does not exceed val_len. A firmware response with
a length field larger than expected overruns the caller buffer and
reads past the end of the reply allocation.
Replace the dead -ENOMEM check with an active validation that
reply->length fits within val_len before the memcpy. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd
generic_set_cmd() and generic_get_cmd() use the low nibble of
ctrl->bRequest as an index into con->data[]:
u8 cmd = (ctrl->bRequest & 0x0F); /* 0 .. 15 */
...
con->data[cmd] = value; /* OOB when cmd >= 5 */
struct usb_audio_control (include/linux/usb/audio.h) declares data as
a 5-element array, so indices 5 through 15 write (or read) up to 44
bytes past the end of the array on the heap.
A malicious USB host can craft a class-specific SET_CUR / GET_CUR
request with an arbitrary bRequest value, triggering the out-of-bounds
access from an IRQ completion handler with no further preconditions.
Add an ARRAY_SIZE() guard to both functions. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ua101: reject mismatched capture/playback packet sizes
detect_usb_format() cross-checks bSubframeSize, bBitResolution and
tSamFreq between the capture and playback interfaces, but never relates
the two endpoints' wMaxPacketSize and bNrChannels. Each playback URB
gets a buffer of ua->playback.max_packet_bytes, while the number of
bytes written into it is derived from the capture stream:
capture_urb_complete() computes frames from the received capture packet
and capture.frame_bytes, and start_usb_playback() and playback_work()
multiply that by playback.frame_bytes.
A device declaring a large capture wMaxPacketSize with few capture
channels and a small playback wMaxPacketSize with many playback channels
therefore memset()s and memcpy()s past the end of the playback buffer,
in open() of the PCM node the driver registers during probe.
usb_submit_urb() rejects the over-long iso_frame_desc[0].length with
-EMSGSIZE, but only after the write.
Reject such descriptors at probe time. Genuine UA-101/UA-1000 hardware
declares proportional packet sizes and is unaffected.
BUG: KASAN: slab-out-of-bounds in start_usb_playback (sound/usb/misc/ua101.c:586)
Write of size 2048 at addr ffff8881098f3c00 by task exploit/5021
Call Trace:
__asan_memset (mm/kasan/shadow.c:84)
start_usb_playback (sound/usb/misc/ua101.c:586)
playback_pcm_open (sound/usb/misc/ua101.c:679)
snd_pcm_open_substream (sound/core/pcm_native.c:2829)
snd_pcm_open (sound/core/pcm_native.c:2865 sound/core/pcm_native.c:2932)
snd_pcm_playback_open (sound/core/pcm_native.c:2891)
snd_open (sound/core/sound.c:166)
chrdev_open (fs/char_dev.c:411)
do_dentry_open (fs/open.c:996)
vfs_open (fs/open.c:1101)
path_openat (fs/namei.c:4837 fs/namei.c:5000)
do_file_open (fs/namei.c:5029)
do_sys_openat2 (fs/open.c:1417)
__x64_sys_openat (fs/open.c:1423 fs/open.c:1439 fs/open.c:1434)
do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The buggy address belongs to the object at ffff8881098f3c00
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 0 bytes inside of
allocated 168-byte region [ffff8881098f3c00, ffff8881098f3ca8) |
