| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
coredump: hold RCU while releasing parked threads
coredump_finish() releases the parked threads by clearing ->task in
their core_thread entry and calling wake_up_process() on each of them.
It does that without holding a reference on the task and without being
inside rcu.
But calling wake_up_process(task) without rcu here isn't safe. A parked
thread doesn't need that wakeup to leave. A spurious wakeup or a
preemption after the store is enough for the task to go away.
So if the coredump client is preempted between the store and
wake_up_process() the thread can exit and be freed in the meantime and
try_to_wake_up() takes pi_lock in freed memory.
Hold rcu across the loop. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Initialize modname and offset in print_rec()
print_rec() leaves 'modname' and 'offset' uninitialized and
kallsyms_lookup() only sets them on success. When the lookup fails like
when a module is being loaded or unloaded, 'modname' holds a garbage
value, passes the 'if (modname)' check, and is dereferenced by
seq_printf().
Oops: general protection fault
RIP: 0010:string+0x48/0xe0
Call Trace:
vsnprintf+0x1f5/0x650
seq_printf+0x8e/0xb0
print_rec+0x6c/0xc0
t_show+0x4c/0x440
seq_read_iter+0x119/0x480
This can be triggered by reading available_filter_functions while a
module is being loaded or unloaded.
Initialize both variables so a failed lookup skips the module name. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: don't lose the signal that ends work
When a thread exits, only its tracked requests are cancelled. Then its
io-wq is torn down. io_wq_exit_workers() signals every worker, to get it
out of an interruptible sleep, and waits for all of them to exit. Before
they do, they go through the work that is left. Unbounded work is
cancelled. Bounded work is run, as it is expected to end by itself.
Not all of it does. An open has no file yet, so it counts as bounded, and
the open of a FIFO waits for the other end. That is what the signal is for.
But the workers are signalled once, and a worker that hasn't started the
work by then loses the signal:
io_wq_exit_workers() io_worker_handle_work()
io_wq_worker_wake()
set TIF_NOTIFY_SIGNAL
io_assign_current_work()
io_run_task_work()
clear TIF_NOTIFY_SIGNAL
io_wq_submit_work()
fifo_open()
wait_for_partner()
wait_for_completion_timeout()
The thread never gets out of do_exit():
IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC
exit of the thread that has submitted it
hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is
killed.
Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT
set. The bit is set before the workers are signalled, and it is tested
after the flag has been cleared, with clear_notify_signal() providing the
barrier. So either the flag stays, or the bit is seen.
Work that is started while the io-wq exits is treated like work that is
being run at that time: it isn't interrupted unless it waits
interruptibly. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Save the event file instead of the compatible histogram
create_field_var_hist() creates a histogram on the matched event to
supply a field variable, and records it on the target so it can be torn
down later:
hist_data = find_compatible_hist(target_hist_data, file);
...
/* Save the compatible histogram information */
var_hist->hist_data = hist_data;
hist_data is not the histogram it creates. It is one that was already
there, whose keys the new one copies. The saved pointer has a single
user, unregister_field_var_hists(), which runs when the target is
removed:
file = hist_data->field_var_hists[i]->hist_data->event_file;
find_compatible_hist() matches on keys alone, so it can pick one with no
variables of its own. check_var_refs() then returns false and the user
can remove it while the target still points at it:
BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320
Read of size 8 at addr ffff8880093b90e0 by task init/1
Freed by task 1:
kfree+0x154/0x420
event_hist_trigger_free+0x1d5/0x320
event_hist_trigger_parse+0x35f3/0x69e0
trigger_process_regex+0x1a6/0x250
Save the event file instead. It is all the dereference ever wanted, and
it does not go away when the user removes a trigger. |
| When a CA's parent lives on the same Krill server: instead of building and verifying a signed CMS message, it runs the RFC 6492 provisioning exchange in-process and trusts the child identity (child_handle) that the caller put in the parent contact. Nothing checks that this child identity actually belongs to the CA making the request. |
| In the Linux kernel, the following vulnerability has been resolved:
asymmetric_keys: reject trust keys without IDs
The PKCS#8 parser deliberately leaves the asym_key_ids payload slot
empty. key_or_keyring_common() unconditionally dereferences that slot
when a PKCS#8 key is supplied to a key_or_keyring restriction. Both the
plain and :chain forms reach this branch, allowing an unprivileged caller
to trigger a NULL pointer dereference through KEYCTL_RESTRICT_KEYRING
followed by add_key().
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:key_or_keyring_common (crypto/asymmetric_keys/restrict.c:205 crypto/asymmetric_keys/restrict.c:279)
Call Trace:
<TASK>
__key_create_or_update (security/keys/key.c:884)
key_create_or_update (security/keys/key.c:1021)
__do_sys_add_key (security/keys/keyctl.c:134)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Kernel panic - not syncing: Fatal exception
Reject an asymmetric restriction key without key IDs. A PKCS#8 private
key cannot identify the signer of a candidate certificate and is not a
valid trust anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
keys/trusted_keys: return immediately after TPM unseal failure
trusted_tpm_unseal() proceeds to pcrlock() when the TPM unseal operation
fails. If pcrlock() succeeds, its return value overwrites the unseal error,
causing key instantiation to succeed.
Return immediately when unseal fails to preserve the original error. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the read method check against type removal
keyctl_read_key() checks key->type->read without holding key->sem.
A reference keeps the key alive, but does not pin the module containing
its type. A surviving RxRPC key can therefore be read while AF_RXRPC
is being unloaded:
KEYCTL_READ task Module unload and key GC
---------------- ------------------------
lookup_user_key()
permission / possession checks
load key->type
af_rxrpc_exit()
unregister_key_type()
GC: down_write(key->sem)
GC: retype to key_type_dead
GC: up_write(key->sem)
unregister_key_type() returns
free_module()
read saved type's read member
The final access can read freed module storage. The read invocation in
__keyctl_read_key() is already protected by key->sem, but the earlier
method check is outside that critical section.
Move the method check into __keyctl_read_key(), after key_validate() and
under its existing read hold on key->sem. The check and invocation then
use the same protected type for length queries and every read retry.
The GC cannot retype the key until the semaphore is released, and type
unregistration waits for that GC pass before the module can be freed.
Return -EOPNOTSUPP when validation succeeds and the type has no read
method. A temporary buffer may now be allocated before this result;
allocation and copying to userspace remain outside the semaphore. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: make keyring indexes independent of kernel addresses
KEYCTL_READ returns the serial numbers in a keyring in associative-array
traversal order. The first word of the index is a public, deterministic
hash of the type pointer, domain pointer and description. An unprivileged
user can therefore insert keys with known descriptions, predict their
order for each possible KASLR slide, and recover the kernel image address.
On an x86-64 build with 16 MiB alignment, 45 user keys suffice to
distinguish the candidate slides.
Remove the addresses from the whole index, not just its first hash word.
Assign each key type and domain a nonzero 64-bit ID and hash those IDs and
the description with a once-initialized SipHash key. Use the full IDs in
the later index chunks as well. Truncating or hashing the IDs there would
lose the guarantee that distinct type/domain/description tuples have a
differing index bit.
Allocate IDs lazily since private key types need not be registered. Cache
them in the index key so tree walks and copies of an existing index do not
need to dereference a type descriptor that may have been unregistered.
Keep the 32-bit chunk layout and diff_objects() bit offsets consistent,
and retain the separate root slot for keyrings used by recursive search.
The key comparison, permissions and userspace data format are unchanged;
only the address-dependent in-memory ordering is replaced. |
| A memory exhaustion issue exists in Open5GS v2.8.0 in the HTTP/2 SBI server. Repeated header names cause previously allocated header strings to be leaked, and HPACK compression allows an unauthenticated remote attacker to trigger tens of thousands of duplicate headers with a small request. Repeated crafted requests can cause persistent heap growth, exhaust process memory, and terminate the affected Open5GS network function, resulting in denial of service. |
| The issue is a resource exhaustion vulnerability associated with DNSSEC validation. BIND always validates all RRSIG records in an answer, even if they are not strictly needed. A query to an authoritative server/zone which returns many valid but superfluous RRSIG records causes the validator to waste disproportionate CPU time.
This issue affects BIND 9 versions 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, and 9.20.9-S1 through 9.20.24-S1. |
| A DNSSEC validating resolver that is under a random subdomain attack against a DNSSEC-signed zone can suffer from runaway memory usage. The attacker needs to be able to send queries faster than the resolver can perform validation. The increased memory usage can be orders of magnitude beyond the limit configured in the `max-cache-size` parameter.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1. |
| It is possible for an attacker's zone to respond to a query with an RRSIG that has a smaller number of labels than the zone in which the RRSIG is contained. This causes `named` to produce a wildcard name for a zone that is shorter than the attacker's zone, which can result in cache poisoning. For this attack to have any effect, the resolver under attack must have set `synth-from-dnssec yes;` (which is the default).
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1. |
| CrewAI contains an SSRF vulnerability caused by its SSRF guard and HTTP client, which both miss malicious content in URLs by checking opposite content passed to it, enabling any request that injects a malicious URL to perform SSRF, such as with the ScrapWebsiteTool. |
| Improper neutralization of special elements used in a template engine in the publishing component of Amazon Virtual Engineering Workbench (VEW) could allow a remote authenticated third party to run arbitrary code with the permissions of the publishing Lambda's IAM role. This could allow access to data and resources across all tenant projects. The code is reachable through a crafted CloudFormation template body containing template engine directives submitted through the product versioning API.
To remediate this issue, users should redeploy from the latest version of awslabs/virtual-engineering-workbench. |
| The error handling implementation fails to properly sanitize or validate user-supplied input within URL parameters under specific conditions. This allows end-users to manipulate the error messages that are displayed by the application.
By exploiting this vulnerability, malicious actors can inject arbitrary content into error messages. This enables them to perform social engineering attacks, such as phishing or credential theft, by replacing legitimate error messages with malicious content, misleading users into compromising sensitive information or taking harmful actions. |
| The Private Internet Access Extension for Firefox contains an unguarded onAuthRequired authentication handler, leading to leakage of PIA proxy credentials when a user visits any malicious website that issues a Basic auth challenge. This issue was fixed in version 3.2.5, but reintroduced in later versions. |
| Jenkins 2.587 and earlier, LTS 2.580.1 and earlier converts the launch commands in older agent configurations into launchers provided by the Command Agent Launcher Plugin without checking whether they have been approved by an administrator, allowing attackers with Agent/Configure permission to execute arbitrary code in the context of the Jenkins controller JVM. |
| In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01857954; Issue ID: MSV-8247. |
| In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to remote escalation of privilege, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01879158 / MOLY01774038; Issue ID: MSV-9811. |
