| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Command injection in the <redacted> parameter of a <redacted>.exe request leads to remote code execution as the root user.
This issue affects Iocharger firmware for AC models before version 24120701.
Likelihood: Moderate – This action is not a common place for command injection vulnerabilities to occur. Thus, an attacker will likely only be able to find this vulnerability by reverse-engineering the firmware or trying it on all <redacted> fields. The attacker will also need a (low privilege) account to gain access to the <redacted> binary, or convince a user with such access to execute a payload.
Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and delete files and services.
CVSS clarification. The attack can be executed over any network connection the station is listening to and serves the web interface (AV:N), and there are no additional security measure sin place that need to be circumvented (AC:L), the attack does not rely on preconditions (AT:N). The attack does require authentication, but the level of authentication is irrelevant (PR:L), it does not require user interaction (UI:N). If is a full system compromise, potentially fully compromising confidentiality, integrity and availability of the devicer (VC:H/VI:H/VA:H). A compromised charger can be used to "pivot" onto networks that should otherwise be closed, cause a low confidentiality and interity impact on subsequent systems. (SC:L/SI:L/SA:H). Because this device is an EV charger handing significant amounts of power, we suspect this vulnerability can have a safety impact (S:P). The attack can be automated (AU:Y). |
| An unauthenticated remote command execution vulnerability exists in Pandora FMS versions up to and including 5.0RC1 via the Anyterm web interface, which listens on TCP port 8023. The anyterm-module endpoint accepts unsanitized user input via the p parameter and directly injects it into a shell command, allowing arbitrary command execution as the pandora user. In certain versions (notably 4.1 and 5.0RC1), the pandora user can elevate privileges to root without a password using a chain involving the artica user account. This account is typically installed without a password and is configured to run sudo without authentication. Therefore, full system compromise is possible without any credentials. |
| NVIDIA runx contains a vulnerability where an attacker could cause a code injection. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| Due to incorrect memory address handling in ABAP SQL of SAP NetWeaver and ABAP Platform (Application Server ABAP), an authenticated attacker with high privileges could execute certain forms of SQL queries leading to manipulation of content in the output variable. This vulnerability has a low impact on the confidentiality, integrity and the availability of the application. |
| FutureNet MA and IP-K series provided by Century Systems Co., Ltd. contain an OS command Injection vulnerability. A user who logs in to the Web UI of the product may execute an arbitrary OS command. |
| An issue was discovered on FIRSTNUM JC21A-04 devices through 2.01ME/FN that allows authenticated attackers to execute arbitrary OS system commands with root privileges via crafted payloads to the xml_action.cgi?method= endpoint. |
| TOTOLINK N300RT wireless router firmware versions prior to V3.4.0-B20250430 (discovered in V2.1.8-B20201030.1539) contain an OS command injection vulnerability in the Boa formWsc handling functionality. An unauthenticated attacker can send specially crafted requests to trigger command execution via the targetAPSsid request parameter. |
| Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability allows OS Command Injection as root
This issue affects Iocharger firmware for AC model chargers before version 24120701
Likelihood: Moderate – The <redacted> binary does not seem to be used by the web interface, so it might be more difficult to find. It seems to be largely the same binary as used by the Iocharger Pedestal charging station, however. The attacker will also need a (low privilege) account to gain access to the <redacted> binary, or convince a user with such access to execute a crafted HTTP request.
Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and delete
files and services. |
| A vulnerability was detected in sequa-ai sequa-mcp up to 1.0.13. This affects the function redirectToAuthorization of the file src/helpers/node-oauth-client-provider.ts of the component OAuth Server Discovery. Performing manipulation results in os command injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. Upgrading to version 1.0.14 is able to mitigate this issue. The patch is named e569815854166db5f71c2e722408f8957fb9e804. It is recommended to upgrade the affected component. The vendor explains: "We only promote that mcp server with our own URLs that have a valid response, but yes if someone would use it with a non sequa url, this is a valid attack vector. We have released a new version (1.0.14) that fixes this and validates that only URLs can be opened." |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| File::Find::Rule through 0.34 for Perl is vulnerable to Arbitrary Code Execution when `grep()` encounters a crafted filename.
A file handle is opened with the 2 argument form of `open()` allowing an attacker controlled filename to provide the MODE parameter to `open()`, turning the filename into a command to be executed.
Example:
$ mkdir /tmp/poc; echo > "/tmp/poc/|id"
$ perl -MFile::Find::Rule \
-E 'File::Find::Rule->grep("foo")->in("/tmp/poc")'
uid=1000(user) gid=1000(user) groups=1000(user),100(users) |
| We have identified a buffer overflow issue allowing out-of-bounds write when processing LLMNR or mDNS queries with very long DNS names. This issue only affects systems using Buffer Allocation Scheme 1 with LLMNR or mDNS enabled.
Users should upgrade to the latest version and ensure any forked or derivative code is patched to incorporate the new fixes. |
| Git GUI allows you to use the Git source control management tools via a GUI. A malicious repository can ship versions of sh.exe or typical textconv filter programs such as astextplain. Due to the unfortunate design of Tcl on Windows, the search path when looking for an executable always includes the current directory. The mentioned programs are invoked when the user selects Git Bash or Browse Files from the menu. This vulnerability is fixed in 2.43.7, 2.44.4, 2.45.4, 2.46.4, 2.47.3, 2.48.2, 2.49.1, and 2.50.1. |
| Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability allows OS Command Injection as root
This issue affects Iocharger firmware for AC model chargers before version 24120701.
Likelihood: Moderate – The attacker will first need to find the name of the script, and needs a (low privilege) account to gain access to the script, or convince a user with such access to execute a request to it.
Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and deletefiles and services.
CVSS clarification: Any network interface serving the web ui is vulnerable (AV:N) and there are not additional security measures to circumvent (AC:L), nor does the attack require and existing preconditions (AT:N). The attack is authenticated, but the level of authentication does not matter (PR:L), nor is any user interaction required (UI:N). The attack leads to a full compromised (VC:H/VI:H/VA:H), and compromised devices can be used to pivot into networks that should potentially not be accessible (SC:L/SI:L/SA:H). Becuase this is an EV charger handing significant power, there is a potential safety impact (S:P). This attack can be automated (AU:Y). |
| A vulnerability was detected in CosmodiumCS OnlyRAT up to 3.2. The affected element is the function connect/remote_upload/remote_download of the file main.py of the component Configuration File Handler. The manipulation of the argument configuration["PASSWORD"] results in os command injection. The attack requires a local approach. Attacks of this nature are highly complex. The exploitability is described as difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A command injection is possible through the user interface, allowing arbitrary command execution as
the root user. oMG2000 running MGOS 3.15.1 or earlier is affected.
MG90 running MGOS 4.2.1 or earlier is affected. |
| Atcom 100M IP Phones firmware version 2.7.x.x contains an authenticated command injection vulnerability in the web configuration CGI script that allows attackers to execute arbitrary system commands. Attackers can inject shell commands through the 'cmd' parameter in web_cgi_main.cgi, enabling remote code execution with administrative credentials. |
| A vulnerable feature in the command line interface of EdgeConnect SD-WAN could allow an authenticated attacker to exploit built-in script execution capabilities. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system if the feature is enabled without proper security measures. |
| A command injection vulnerability in the Palo Alto Networks Cortex XDR® Broker VM allows an authenticated user to execute arbitrary OS commands with root privileges on the host operating system running Broker VM. |
| Orkes Conductor v3.21.11 allows remote attackers to execute arbitrary OS commands through unrestricted access to Java classes. |
