| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reject free space cache with more entries than pages
When loading a v1 free space cache, __load_free_space_cache() takes
num_entries and num_bitmaps straight from the on-disk
btrfs_free_space_header. That header is stored in the tree_root under a key
with type 0, which the tree-checker has no case for, so neither count is
validated before the load trusts it.
The load loops num_entries times and maps the next page whenever the current
one runs out, going through io_ctl_check_crc() -> io_ctl_map_page(), which
does io_ctl->pages[io_ctl->index++]. But pages[] is allocated in
io_ctl_init() from the cache inode's i_size, not from num_entries:
num_pages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
io_ctl->pages = kcalloc(num_pages, sizeof(struct page *), GFP_NOFS);
So if num_entries claims more records than the pages can hold, io_ctl->index
runs off the end of pages[]. The write side never hits this because
io_ctl_add_entry() and io_ctl_add_bitmap() both stop once
io_ctl->index >= io_ctl->num_pages; the read side just never had the same
check.
To trigger it, take a clean cache (num_entries = <N> here), set num_entries
in the header to 0x10000, and fix up the leaf checksum so it still passes
the tree-checker. The cache inode has i_size = 65536, so num_pages is 16 and
pages[] is a 16-pointer (kmalloc-128) array. The load now tries to read
65536 entries, io_ctl->index walks up to 16, and pages[16] is read past the
array:
BUG: KASAN: slab-out-of-bounds in io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
Read of size 8 at addr ffff88800c833a80 by task kworker/u8:3/58
io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565)
__load_free_space_cache (fs/btrfs/free-space-cache.c:655 fs/btrfs/free-space-cache.c:820)
load_free_space_cache (fs/btrfs/free-space-cache.c:1017)
caching_thread (fs/btrfs/block-group.c:880)
btrfs_work_helper (fs/btrfs/async-thread.c:312)
process_one_work
worker_thread
kthread
ret_from_fork
free-space-cache.c:420 is io_ctl_map_page(), inlined into io_ctl_check_crc()
at line 565, which is why that is the frame KASAN names. The out-of-bounds
slot is then treated as a struct page and handed to crc32c(), so the bad
read turns into a GP fault.
Add the missing check to io_ctl_check_crc(), which is where both the entry
loop and the bitmap loop end up. When num_entries is too large the load now
fails like any corrupt cache: __load_free_space_cache() drops it and rebuilds
the free space from the extent tree, so a valid cache is never rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix fils_discovery double free on alloc failure
ieee80211_set_fils_discovery() calls kfree_rcu() on the old template
before allocating the replacement. If the kzalloc() then fails, it
returns -ENOMEM while link->u.ap.fils_discovery still points at the
object already queued for freeing. A later update or AP teardown
(ieee80211_stop_ap()) re-queues that same rcu_head; the second free is
caught by KASAN when the RCU sheaf is processed in softirq:
BUG: KASAN: double-free in rcu_free_sheaf (mm/slub.c:5850)
Free of addr ffff88800c065280 by task swapper/0/0
...
__rcu_free_sheaf_prepare (mm/slub.c:2634 mm/slub.c:2940)
rcu_free_sheaf (mm/slub.c:5850)
rcu_core (kernel/rcu/tree.c:2617 kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
The buggy address belongs to the cache kmalloc-96 of size 96
Queue the old object for kfree_rcu() only after the new one is published,
matching ieee80211_set_probe_resp() and ieee80211_set_s1g_short_beacon(). |
| Out of bounds write in GPU in Google Chrome prior to 157.0.8103.50 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Uninitialized resource in GPU in Google Chrome on on Android prior to 157.0.8103.50 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tp_meter: avoid divide-by-zero for dec_cwnd
The cwnd is always MSS <= cwnd <= 0x20000000. But the calculation in
batadv_tp_update_cwnd() assumes unsigned 32 bit arithmetics.
((mss * 8) ** 2) / (cwnd * 8)
In case cwnd is actually 0x20000000, it will be shifted by 3 bit to the
left end up at 0x100000000 or U32_MAX + 1. It will therefore wrap around
and be 0 - resulting in:
((mss * 8) ** 2) / 0
This is of course invalid and cannot be calculated. The calculation should
must be simplified to avoid this overflow:
(mss ** 2) * 8 / cwnd
It will keep the precision enhancement from the scaling (by 8) but avoid
the overflow in the divisor.
In theory, there could still be an overflow in the dividend. It is at the
moment fixed to BATADV_TP_PLEN in batadv_tp_recv_ack() - so it is not an
imminent problem. But allowing it to use the whole u32 bit range, would
mean that it can still use up to 67 bits. To keep this calculation safe for
32 bit arithmetic, mss must never use more than floor((32 - 3) / 2) bits -
or in other words: must never be larger than 16383. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: v: prevent OGM aggregation on disabled hardif
When an interface gets disabled, the worker is correctly disabled by
batadv_hardif_disable_interface() -> ... -> batadv_v_ogm_iface_disable().
In this process, the skb aggr_list is also freed.
But batadv_v_ogm_send_meshif() can still queue new skbs (via
batadv_v_ogm_queue_on_if()) to the aggr_list. This will only stop after all
cores can no longer find the RCU protected list of hard interfaces. These
queued skbs will never be freed or consumed by batadv_v_ogm_aggr_work.
The batadv_v_ogm_iface_disable() function must block
batadv_v_ogm_queue_on_if() to avoid leak of skbs. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: property: Cap recursion depth in __tb_property_parse_dir()
A DIRECTORY entry's value field is used as the dir_offset for a
recursive call into __tb_property_parse_dir() with no depth counter.
A crafted peer that chains DIRECTORY entries into a back-reference
loop drives the parser until the kernel stack is exhausted and the
guard page fires. Any untrusted XDomain peer (cable, dock, in-line
inspector, adjacent host) that reaches the PROPERTIES_REQUEST
control-plane exchange can trigger this without authentication.
Thread a depth counter through tb_property_parse() and
__tb_property_parse_dir(), and reject blocks that exceed
TB_PROPERTY_MAX_DEPTH = 8. That is comfortably larger than any
observed legitimate XDomain layout.
Operators who do not need XDomain host-to-host discovery can disable
the path entirely with thunderbolt.xdomain=0 on the kernel command
line. |
| In Progress® Kendo® UI for jQuery versions prior to 2026.4.1111, kendo.init() compiles data-* attribute values with new Function when an invalid JSON object is supplied. An attacker with low privileges who can control these attribute values can inject JavaScript that executes during declarative widget initialization when a user loads or interacts with an affected page. Successful exploitation can compromise the confidentiality and integrity of data accessible in the user's browser context. The issue was reported in version 2022.3.1109; the first affected release has not been established. |
| In Progress® Kendo® UI for jQuery versions from 2022.2.621 prior to 2026.4.1111 the DropDownButton and SplitButton allow markup injection through the `id` and `target` attributes. An attacker who can influence these item values can break out of the attributes and inject markup, including event handlers. The issue is fixed in 2026.4.1111. |
| In Progress® Kendo® UI for jQuery prior to 2026.4.1111 the TabStrip, PanelBar, and Menu widgets support mapping a dataSource field to `spriteCssClass`. If an attacker can control the mapped data, they can break out of the attribute and inject markup, including event-handler attributes. The resulting JavaScript executes in the application's origin when a victim loads a page that renders the affected widget, allowing access to data and actions available in the victim's authenticated session. |
| In Progress Kendo UI for jQuery versions 2026.3.1014 up to, but not including, 2026.4.1110, ActionSheet does not encode title, subtitle, and header button label values before rendering them. An attacker who can influence these values can inject markup that executes as JavaScript when a user opens the ActionSheet. Successful exploitation may compromise the confidentiality and integrity of data available in the user's browser context. The report identifies version 2026.3.1014; the first affected release has not been established. |
| In Progress Kendo UI for jQuery versions 2026.3.1015 up to, but not including, 2026.4.1110, the Grid and TreeList column-reorder drag clue reparses header text as HTML. An attacker who can influence a column field or title used by an affected application can cause JavaScript to execute when a user drags a column header while column reordering is enabled. Successful exploitation may compromise the confidentiality and integrity of data available in the user's browser context. The first affected release has not been established. |
| In Progress Kendo UI for jQuery versions 2026.3.1015 up to, but not including, 2026.4.1110, PivotGrid and PivotConfigurator axis field names are passed to a chip template without appropriate encoding. An attacker who can influence an axis field name can cause JavaScript to execute when a user views the rendered chip. The field name can be interpreted as HTML in both attribute and element contexts. Successful exploitation may compromise the confidentiality and integrity of data available in the user's browser context. The first affected release has not been established. |
| In Progress Kendo UI for jQuery versions 2026.3.1015 up to, but not including, 2026.4.1110, PropertyGrid does not encode bound property values and items[].description in its default configuration. An attacker who can influence either value can cause JavaScript to execute when a user views the grid. Successful exploitation may compromise the confidentiality and integrity of data available in the user's browser context. The first affected release has not been established. |
| A vulnerability in the administration REST interface of Azul Payara allows a remote, unauthenticated attacker to bypass secure-admin remote-access restrictions by supplying an arbitrary value in the X-GlassFish-authToken HTTP header. The header's presence waives the remote-rejection check before the token is validated, and an invalid token falls through to password-based authentication, which succeeds without credentials on default domains configured with an empty administrative password. Successful exploitation grants execution of arbitrary administrative commands, equivalent to complete compromise of the server. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Apache Sling XSS. xssAPI.getStyleToken() accepts markup in unquoted urls.
This issue affects Apache Sling XSS: before 2.4.14.
Users are recommended to upgrade to version 2.4.14, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/IOV: Skip VF Resizable BAR restore on read error
sriov_restore_vf_rebar_state() uses the VF Resizable BAR Control register
to decide how many VF BARs to restore (nbars) and which VF BAR each
iteration addresses (bar_idx). bar_idx indexes into dev->sriov->barsz[],
which has only PCI_SRIOV_NUM_BARS (6) entries.
When a device does not respond, config reads typically return
PCI_ERROR_RESPONSE (~0). Both fields are 3 bits wide, so nbars and bar_idx
both evaluate to 7. The barsz[] access then goes out of bounds. UBSAN
reports this as:
UBSAN: array-index-out-of-bounds in drivers/pci/iov.c:948:51 index 7 is out of range for type 'resource_size_t [6]'
Observed on an NVIDIA RTX PRO 1000 GPU (GB207GLM) that stopped responding
during a failed GC6 power state exit. The subsequent pci_restore_state()
invoked sriov_restore_vf_rebar_state() while config reads returned
0xffffffff, triggering the splat.
Bail out if any VF Resizable BAR Control read returns PCI_ERROR_RESPONSE.
No further VF BARs are touched, which is safe because a config read that
returns PCI_ERROR_RESPONSE indicates the device is unreachable and
restoration is pointless. This mirrors the guard in
pci_restore_rebar_state(). |
| Generation of Error Message Containing Sensitive Information vulnerability in ash-project ash_ai allows a caller of an AshAi tool to read internal error details, including module names and data values, by making a tool call fail.
AshAi.ToToolError gained an implementation for Ash.Error.Unknown.UnknownError that returns the error's error field as is, and AshAi.Tool.Errors.format/1 sends that text to MCP clients (tool calls and resource reads in AshAi.Mcp.Server) and to the model in AshAi.ToolLoop. Ash stores the full Exception.format/2 output of a raised exception, or inspect/1 of a bare {:error, term} return, in that field. A tool result that cannot be JSON-encoded raises a Protocol.UndefinedError whose text includes the inspected value, which can be a whole record with fields the tool never returns. None of these errors were logged. The fix logs them under an error id and returns only that id to the caller.
This issue affects ash_ai: from 1.5.0 before 1.5.1. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: correct drop logic for malformed AMPDU frames
The previous commit aims to fix issue caused by malformed AMPDU frames.
But the drop logic fails to deal with the first AMPDU packet paired with
certain range of sequence number, and leads to unexpected packet drop.
It is more likely to encounter this failure when there are busy traffic
during rekey process and could lead to disconnection from the AP.
Fix this by adding a initial state judgement and only reset status
during pairwise rekey. |
| Heap-based buffer overflow in Windows Client for NFS allows an authorized attacker to elevate privileges locally. |