| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-31 and 6.9.13-56, a missing limit check in the MVG decoder allows a crafted MVG image to trigger an excessively long-running operation. This issue is fixed in versions 7.1.2-31 and 6.9.13-56. |
| Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Business Logic Infra SEC). Supported versions that are affected are 9.2.0.0-9.2.26.5. Easily exploitable vulnerability allows low privileged attacker with network access via JDENET to compromise JD Edwards EnterpriseOne Tools. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of JD Edwards EnterpriseOne Tools. CVSS 3.1 Base Score 4.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L). |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-31, a crafted XMP profile can trigger excessive work while the parser determines a rational value's numerator and denominator, causing denial of service. This issue is fixed in version 7.1.2-31. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-31 and 6.9.13-56, a missing security-policy check in the CUT encoder allows a crafted local encoding operation to read data that policy should deny and can also cause a crash. This issue is fixed in versions 7.1.2-31 and 6.9.13-56. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-30 and 6.9.13-55, a crafted XMP profile can reach a recursion limit that is handled as a fatal condition instead of an ordinary exception, terminating the image-processing process. This issue is fixed in versions 7.1.2-30 and 6.9.13-55. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-30 and 6.9.13-55, a crafted highly compressed MAT image can make the MAT decoder create temporary files larger than the configured security-policy limit, bypassing resource restrictions and consuming excessive disk space. This issue is fixed in versions 7.1.2-30 and 6.9.13-55. |
| Vulnerability in the Oracle Solaris product of Oracle Systems (component: Filesystems). The supported version that is affected is 11.4. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Solaris executes to compromise Oracle Solaris. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Solaris. CVSS 3.1 Base Score 5.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). |
| A flaw was found in Hibernate Validator starting with version 5.4.1. This vulnerability allows an unauthenticated remote attacker to cause a Denial of Service (DoS) by submitting specially crafted input containing unescaped message parameters. Improper escaping allows user-supplied data to be re-evaluated during Expression Language (EL) processing, leading to excessive resource consumption and application unresponsiveness. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix ovl adaptor platform device leak
mtk_drm_probe() creates an OVL adaptor platform device with
platform_device_register_data() when the display pipeline requires the
OVL adaptor.
If a later initialization step fails, the probe error path releases
the DRM resources without unregistering the already registered OVL
adaptor device. The normal remove path likewise leaves the device
registered after the DRM driver is unbound.
Keep track of whether the OVL adaptor was successfully registered and
unregister it on probe failure. Also recover the platform device from
the stored DDP component device and unregister it during normal
removal.
The issue was identified by a static analysis tool I developed and
confirmed by manual review. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix tree connection leak in smb2_tree_connect()
See the procedure below:
smb2_tree_connect
ksmbd_tree_conn_connect
xa_store(&sess->tree_conns, tree_conn->id, tree_conn)
ksmbd_counter_inc(KSMBD_COUNTER_TREE_CONNS)
ksmbd_share_tree_conn_inc(sc)
ksmbd_iov_pin_rsp // fail
status.ret = KSMBD_TREE_CONN_STATUS_NOMEM
// do not disconnect tree_conn
Disconnect the new tree connection if ksmbd_iov_pin_rsp() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix dma mapping leak in stmmac_tso_xmit()
In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the
frame is dropped but the DMA mappings already created for the linear
part and for the fragments mapped before the failure are never
unmapped, leaking DMA mappings.
Fix the leak by walking back over the descriptors used by the frame and
releasing each of them with stmmac_free_tx_buffer(). Moreover, release
the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845
On NPCM845, when a target on the I3C bus gets stuck holding SDA low,
the controller reports a false Master Request (MR) in-band interrupt
event. The driver handles this by emitting a STOP condition to restore
the bus.
However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that
emitting a STOP condition may spuriously set the SLVSTART interrupt
status bit. In the Master Request case, this creates a feedback loop:
the STOP triggers a new SLVSTART event, the IRQ handler fires again,
the controller still reports an MR type, another STOP is emitted, and
the cycle repeats indefinitely, resulting in an IRQ storm that can lock
up the CPU.
Clear the SLVSTART status bit explicitly after emitting the STOP in the
Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk
is set. This breaks the feedback loop without affecting normal SLVSTART
processing, which is already guarded in the top-level IRQ handler by
checking that MSTATUS is in SLVREQ state. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv, bpf: Fix memory leak in bpf_jit_free
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts
and calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a
memory leak of the JIT context offsets array.
Fix this by adding the missing kfree(jit_data->ctx.offset) in
bpf_jit_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Fix VINTF0 leak on the init-failure path
tegra241_cmdqv_init_structures() allocates VINTF0 with kzalloc_obj(), inits
it, and preallocates its logical VCMDQs. Two of its error paths leak.
When tegra241_cmdqv_init_vintf() fails it returns before VINTF0 reaches the
cmdqv->vintfs[] array, so the devres unwind on probe failure cannot reach
it; free it directly there.
A later VCMDQ preallocation failure instead leaves VINTF0 published, and so
this time the unwind does reach tegra241_cmdqv_remove_vintf(), which then
frees it from vintf->hyp_own. But tegra241_vintf_hw_init() sets that flag
only afterward, from a HW read-back, so the still-uninited VINTF0 reads as
guest-owned and leaks, with mutex_destroy() and ida_destroy() run on fields
it never set up.
Decide ownership from vintf->idx instead, the index assigned when its id is
allocated: idx 0 is the kernel-owned VINTF0, while idx >= 1 marks a guest
VINTF. So the in-kernel free decision in tegra241_cmdqv_remove_vintf() and
tegra241_vintf_free_lvcmdq() now keys on idx too, and hyp_own stays a pure
HW-readback state. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: pllfh: Fix IO remapping leak in register_pllfhs error path
When mtk_clk_register_pllfhs function fails to register a PLL, it
unregisters all PLLs and cleans up itself in its error path before
returning, so the function callers don't need to do it.
But contrary to mtk_clk_unregister_pllfhs function, that does almost
the same sequence, it does not free the IO memory mapped on fhctl node,
leading to a leak.
Fix this leak by factorizing the cleanup sequence in a new private
function and use it both mtk_clk_register_pllfhs and
mtk_clk_unregister_pllfhs functions.
Also, change the loop index start value to avoid the -1 operation on
index at each loop. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: force complete the MES ring fences on reset
The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is
skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses
a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1
reset, while fence_drv.sync_seq keeps advancing for every packet.
When the reset is triggered because MES itself stopped responding, the
timed-out packets advance sync_seq past the last hw fence value MES wrote.
After resume the first MES submission polls forever on a seq that is never
written back, failing the resume and wedging the box on a second reset:
amdgpu: MES ring buffer is full.
amdgpu: *ERROR* ring gfx_0.0.0 test failed (-110)
amdgpu: resume of IP block <gfx_v11_0> failed -110
amdgpu: GPU reset end with ret = -110
Force complete the MES scheduler ring fences together with the scheduler rings
so their hw fence is realigned to sync_seq.
v2: cover all XCCs (one scheduler ring each), not just mes.ring[0]. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: check return value of nvmet_tcp_set_queue_sock
The return value of nvmet_tcp_set_queue_sock() is currently ignored in
nvmet_tcp_tls_handshake_done(). If it fails (e.g., due to the socket
not being in TCP_ESTABLISHED state), the socket callbacks will not be
properly set, leading to queue and socket leakage.
Fix this by capturing the return value and calling
nvmet_tcp_schedule_release_queue() on failure to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio state after ENOMEM whilst under writeback iteration
Fix the state of the current folio when ENOMEM occurs during writeback
iteration. The folio needs to be redirtied and unlocked before the
terminal writeback_iter() is invoked. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: teardown bugs and resource leaks
Address several teardown issues and resource leaks in the driver's remove
path and error handling:
1. Debounce clock reference leak: The debounce clock (bank->db_clk) is
obtained using of_clk_get() which increments the clock's reference
count, but clk_put() is never called. Register a devm action to
cleanly release it on unbind. Note that of_clk_get(..., 1) remains
necessary over devm_clk_get() because the DT binding does not define
clock-names, precluding name-based lookup.
2. Unregistered chained IRQ handler: The chained IRQ handler is not
disconnected in remove(). If a stray interrupt fires after the driver
is removed, the kernel attempts to execute a stale handler, leading
to a panic. Fix this by clearing the handler in remove().
3. IRQ domain leak: The linear IRQ domain and its generic chips are
allocated manually during probe but never removed. Remove the IRQ
domain during driver teardown to free the associated generic chips
and mappings.
[Bartosz: don't emit an error message on devres allocation failure] |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix leak of request in netfs_write_begin() error handling
Fix netfs_write_begin() to not leak our ref on the request in the event
that we get an error from netfs_wait_for_read(). |
