| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - resolve race condition during AER recovery
During the PCI AER system's error recovery process, the kernel driver
may encounter a race condition with freeing the reset_data structure's
memory. If the device restart will take more than 10 seconds the function
scheduling that restart will exit due to a timeout, and the reset_data
structure will be freed. However, this data structure is used for
completion notification after the restart is completed, which leads
to a UAF bug.
This results in a KFENCE bug notice.
BUG: KFENCE: use-after-free read in adf_device_reset_worker+0x38/0xa0 [intel_qat]
Use-after-free read at 0x00000000bc56fddf (in kfence-#142):
adf_device_reset_worker+0x38/0xa0 [intel_qat]
process_one_work+0x173/0x340
To resolve this race condition, the memory associated to the container
of the work_struct is freed on the worker if the timeout expired,
otherwise on the function that schedules the worker.
The timeout detection can be done by checking if the caller is
still waiting for completion or not by using completion_done() function. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect
hidpp_connect_event() has *four* time-of-check vs time-of-use (TOCTOU)
races when it races with itself.
hidpp_connect_event() primarily runs from a workqueue but it also runs
on probe() and if a "device-connected" packet is received by the hw
when the thread running hidpp_connect_event() from probe() is waiting on
the hw, then a second thread running hidpp_connect_event() will be
started from the workqueue.
This opens the following races (note the below code is simplified):
1. Retrieving + printing the protocol (harmless race):
if (!hidpp->protocol_major) {
hidpp_root_get_protocol_version()
hidpp->protocol_major = response.rap.params[0];
}
We can actually see this race hit in the dmesg in the abrt output
attached to rhbz#2227968:
[ 3064.624215] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
[ 3064.658184] logitech-hidpp-device 0003:046D:4071.0049: HID++ 4.5 device connected.
Testing with extra logging added has shown that after this the 2 threads
take turn grabbing the hw access mutex (send_mutex) so they ping-pong
through all the other TOCTOU cases managing to hit all of them:
2. Updating the name to the HIDPP name (harmless race):
if (hidpp->name == hdev->name) {
...
hidpp->name = new_name;
}
3. Initializing the power_supply class for the battery (problematic!):
hidpp_initialize_battery()
{
if (hidpp->battery.ps)
return 0;
probe_battery(); /* Blocks, threads take turns executing this */
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
}
4. Creating delayed input_device (potentially problematic):
if (hidpp->delayed_input)
return;
hidpp->delayed_input = hidpp_allocate_input(hdev);
The really big problem here is 3. Hitting the race leads to the following
sequence:
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
...
hidpp->battery.desc.properties =
devm_kmemdup(dev, hidpp_battery_props, cnt, GFP_KERNEL);
hidpp->battery.ps =
devm_power_supply_register(&hidpp->hid_dev->dev,
&hidpp->battery.desc, cfg);
So now we have registered 2 power supplies for the same battery,
which looks a bit weird from userspace's pov but this is not even
the really big problem.
Notice how:
1. This is all devm-maganaged
2. The hidpp->battery.desc struct is shared between the 2 power supplies
3. hidpp->battery.desc.properties points to the result from the second
devm_kmemdup()
This causes a use after free scenario on USB disconnect of the receiver:
1. The last registered power supply class device gets unregistered
2. The memory from the last devm_kmemdup() call gets freed,
hidpp->battery.desc.properties now points to freed memory
3. The first registered power supply class device gets unregistered,
this involves sending a remove uevent to userspace which invokes
power_supply_uevent() to fill the uevent data
4. power_supply_uevent() uses hidpp->battery.desc.properties which
now points to freed memory leading to backtraces like this one:
Sep 22 20:01:35 eric kernel: BUG: unable to handle page fault for address: ffffb2140e017f08
...
Sep 22 20:01:35 eric kernel: Workqueue: usb_hub_wq hub_event
Sep 22 20:01:35 eric kernel: RIP: 0010:power_supply_uevent+0xee/0x1d0
...
Sep 22 20:01:35 eric kernel: ? asm_exc_page_fault+0x26/0x30
Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0xee/0x1d0
Sep 22 20:01:35 eric kernel: ? power_supply_uevent+0x10d/0x1d0
Sep 22 20:01:35 eric kernel: dev_uevent+0x10f/0x2d0
Sep 22 20:01:35 eric kernel: kobject_uevent_env+0x291/0x680
Sep 22 20:01:35 eric kernel:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: make apf token non-zero to fix bug
In current async pagefault logic, when a page is ready, KVM relies on
kvm_arch_can_dequeue_async_page_present() to determine whether to deliver
a READY event to the Guest. This function test token value of struct
kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a
READY event is finished by Guest. If value is zero meaning that a READY
event is done, so the KVM can deliver another.
But the kvm_arch_setup_async_pf() may produce a valid token with zero
value, which is confused with previous mention and may lead the loss of
this READY event.
This bug may cause task blocked forever in Guest:
INFO: task stress:7532 blocked for more than 1254 seconds.
Not tainted 5.10.0 #16
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:stress state:D stack: 0 pid: 7532 ppid: 1409
flags:0x00000080
Call Trace:
__schedule+0x1e7/0x650
schedule+0x46/0xb0
kvm_async_pf_task_wait_schedule+0xad/0xe0
? exit_to_user_mode_prepare+0x60/0x70
__kvm_handle_async_pf+0x4f/0xb0
? asm_exc_page_fault+0x8/0x30
exc_page_fault+0x6f/0x110
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x402d00
RSP: 002b:00007ffd31912500 EFLAGS: 00010206
RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0
RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0
RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086
R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000
R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000 |
| Creative Cloud Desktop is affected by a Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability that could result in arbitrary code execution in the context of the current user. Exploit depends on conditions beyond the attacker's control. Exploitation of this issue does not require user interaction. Scope is changed. |
| Race in Updater in Google Chrome on Windows prior to 151.0.7922.72 allowed a local attacker to perform privilege escalation via a malicious file. (Chromium security severity: Low) |
| Race in Updater in Google Chrome on Mac prior to 151.0.7922.72 allowed a local attacker to perform OS-level privilege escalation via a malicious file. (Chromium security severity: Critical) |
| A time-of-check to time-of-use (TOCTOU) flaw in the illumos data-link pseudo-driver (dld) affects handling of the DLDIOC_GETMACPROP and DLDIOC_SETMACPROP ioctls on /dev/dld. drv_ioc_prop_common() in usr/src/uts/common/io/dld/dld_drv.c copies the dld_ioc_macprop_t ioctl header in once to read its pr_valsize field, sizes and allocates a kernel heap buffer from that value, and then copies the full request in a second time from the same unprivileged user address. A concurrent thread can enlarge pr_valsize between the two copyins, so the second copyin and the subsequent property handling write beyond the end of the undersized allocation and corrupt the kernel heap. An unprivileged local user, including one confined to a non-global zone that owns a datalink, can trigger this to panic the system. The resulting kernel heap corruption may be usable for further compromise. |
| Linuxfabrik monitoring-plugins provides Python monitoring plugins for Icinga, Nagios, and related monitoring systems. In version 6.0.0, the logfile check legacy database migration moved a predictable path from /tmp with os.rename() and allowed a local user controlling the plugin account to place a symlink that would be followed by sqlite3.connect() during a root-run check. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: Fix transport_* TOCTOU
Transport assignment may race with module unload. Protect new_transport
from becoming a stale pointer.
This also takes care of an insecure call in vsock_use_local_transport();
add a lockdep assert.
BUG: unable to handle page fault for address: fffffbfff8056000
Oops: Oops: 0000 [#1] SMP KASAN
RIP: 0010:vsock_assign_transport+0x366/0x600
Call Trace:
vsock_connect+0x59c/0xc40
__sys_connect+0xe8/0x100
__x64_sys_connect+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del()
If an exiting non-autoreaping task has already passed exit_notify() and
calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent
or debugger right after unlock_task_sighand().
If a concurrent posix_cpu_timer_del() runs at that moment, it won't be
able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or
lock_task_sighand() will fail.
Add the tsk->exit_state check into run_posix_cpu_timers() to fix this.
This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because
exit_task_work() is called before exit_notify(). But the check still
makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail
anyway in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "openvswitch: switch to per-action label counting in conntrack"
Currently, ovs_ct_set_labels() is only called for confirmed conntrack
entries (ct) within ovs_ct_commit(). However, if the conntrack entry
does not have the labels_ext extension, attempting to allocate it in
ovs_ct_get_conn_labels() for a confirmed entry triggers a warning in
nf_ct_ext_add():
WARN_ON(nf_ct_is_confirmed(ct));
This happens when the conntrack entry is created externally before OVS
increments net->ct.labels_used. The issue has become more likely since
commit fcb1aa5163b1 ("openvswitch: switch to per-action label counting
in conntrack"), which changed to use per-action label counting and
increment net->ct.labels_used when a flow with ct action is added.
Since there’s no straightforward way to fully resolve this issue at the
moment, this reverts the commit to avoid breaking existing use cases. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 17.0 before 19.0.5, 19.1 before 19.1.3, and 19.2 before 19.2.1 that under certain conditions could have allowed an authenticated user to merge code into a protected branch without the required approvals due to a race condition in approval rule processing. |
| Netty is an asynchronous, event-driven network application framework. Prior to versions 4.1.136.Final and 4.2.16.Final, the OcspServerCertificateValidator forwards the SslHandshakeCompletionEvent before the asynchronous OCSP validation completes. This allows the client's downstream handlers to send sensitive application data (e.g., HTTP requests) to a revoked server before the channel is closed by the OCSP check. n io.netty.handler.ssl.ocsp.OcspServerCertificateValidator#userEventTriggered, when an SslHandshakeCompletionEvent is received, the validator immediately calls ctx.fireUserEventTriggered(evt). It then initiates an asynchronous OCSP query using OcspClient.query. Because the handshake completion event is forwarded immediately, downstream handlers in the client's pipeline are notified that the TLS handshake is successful. They may then begin reading and processing incoming application data or sending outgoing data. If the OCSP response later indicates the server's certificate is REVOKED, the validator closes the channel, but by this time, the client may have already leaked sensitive data to a revoked server or processed malicious responses from it. This issue has been fixed in versions 4.1.136.Final and 4.2.16.Final. |
| datamodel-code-generator generates Pydantic v2 models, dataclasses, TypedDict, and msgspec.Struct from OpenAPI, JSON Schema, GraphQL, Avro, Protobuf, and raw JSON, YAML, or CSV. Prior to 0.63.0, datamodel-code-generator validates a URL host once in src/datamodel_code_generator/http.py through get_body, _validate_url_for_fetch, and _get_ips_from_host, but then lets httpx resolve the host again for the connection, allowing DNS rebinding to bypass allow_private_network=False and reach internal services. This issue is fixed in version 0.63.0. |
| When grant-copy operations are processed, the respective grant may or may
not already be in use by another operation (a mapping or another copy).
For all copy operations the referenced guest frame is looked up. When
another operation is already active for the grant (the grant is "pinned"),
what is being supplied back to actually carry out permission checks and
copy operation may not be consistent: The permission check may be carried
out on a page different from the one involved in the copy. |
| A Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in seunshare of selinux policycoreutils allows a user calling seunshare that is running in the unconfined SELinux domain to delete arbitrary root-owned files,
This issue affects policycoreutils through 3.10. |
| Time-of-check Time-of-use (TOCTOU) race condition vulnerability in Erlang/OTP ssl (dtls_packet_demux module) allows an unauthenticated remote attacker to crash all active DTLS sessions on a listener.
A DTLS server listener uses a single shared dtls_packet_demux gen_server process to route incoming UDP datagrams to the correct connection handler. When a DTLS client reconnects rapidly from the same source address and port (sending multiple ClientHello messages in quick succession), a race condition in the demux's internal gb_trees key-value store causes a {key_exists, {old, Client}} crash, terminating the demux process. Because the demux is shared across all DTLS associations on that listener, its crash immediately kills every active DTLS session, not just the attacker's.
The attack is pre-authentication: the attacker only needs to send UDP datagrams containing valid ClientHello messages from the same source IP and port before the intermediate DOWN monitor message is processed by the gen_server. No credentials, no completed handshake, and no special configuration are required, and the crash can be repeated indefinitely to create a persistent denial of service for all clients of that listener.
This vulnerability is associated with program file lib/ssl/src/dtls_packet_demux.erl.
This issue affects OTP from OTP 25.3 before OTP 29.0.3, OTP 28.5.0.3 and OTP 27.3.4.14, corresponding to ssl from 10.9 before 11.7.3, 11.6.0.3 and 11.2.12.10. |
| A vulnerability was identified in Sipeed PicoClaw up to 0.2.9. The impacted element is the function ExecTool.executeRun of the file pkg/agent/pipeline_execute.go. The manipulation of the argument cwe leads to time-of-check time-of-use. The attack must be carried out locally. The exploit is publicly available and might be used. The reported GitHub issue was closed automatically with the label "not planned" by a bot. |
| n8n before 1.123.64, 2.29.8, and 2.30.1 contains a TOCTOU race condition in the Git node's clone operation that allows authenticated users to bypass path restrictions by swapping a directory for a symlink after the path is validated but before the clone runs. This lets an attacker plant a crafted repository in the community node directory, which n8n loads as a custom node on the next restart, executing arbitrary JavaScript on the server. Both self-hosted and cloud instances are affected. |
| Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.73.24 and 6.20.1, the Glide image proxy's URL validation in src/Imaging/RemoteUrlValidator.php and src/Imaging/GuzzleAdapter.php could be bypassed using DNS rebinding. The remote hostname was validated as publicly routable, but resolved again when the image was actually fetched, so an attacker controlling the hostname's DNS could rebind it to an internal address after validation and cause the server to make HTTP requests to internal addresses, including loopback, private network, and cloud metadata endpoints. This affects sites that pass user-supplied URLs to Glide. This issue is fixed in versions 5.73.24 and 6.20.1. |
