| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Node.js web service on VOS (previously Versa FlexVNF) is used for URL-based Zero Touch Provisioning (ZTP) of the VOS appliance and is not required after provisioning is complete. The /decryptTest endpoint of this service is registered in server.js before the session authentication middleware and creates an authenticated session whenever it receives a token that decrypts successfully. Because the key and initialization vector (IV) used for decryption are hardcoded and identical across all VOS appliances, an unauthenticated attacker with network access can compute a valid token, submit it to /decryptTest, and obtain a fully authenticated session without providing any credentials.
Versa’s security hardening guide for Hubs, Branches, and Controllers recommends disabling the Node.js web service after the initial provisioning of the VOS device. This vulnerability is not exploitable on VOS devices where the Node.js web service has been disabled. |
| The Node.js web service on VOS (previously Versa FlexVNF) is used for URL-based Zero Touch Provisioning (ZTP) of the VOS appliance and is not required after provisioning is complete. The /authenticate endpoint of this service passes user-supplied username and password values to child_process.exec() through a sanitizer (escapeRegExp) that removes regular expression metacharacters but not newline characters. An unauthenticated attacker can inject a newline character into the username field to execute arbitrary shell commands as the versa OS service user. No credentials are required; the attacker needs only a CSRF token, which can be obtained from an unauthenticated page load.
Versa’s security hardening guide for Hubs, Branches, and Controllers recommends disabling the Node.js web service after the initial provisioning of the VOS device. This vulnerability is not exploitable on VOS devices where the Node.js web service has been disabled. |
| A user with the Organization Admin role could point the server or token URL of a Git Sync connection at a loopback or internal address, and Grafana would then send the connection's OAuth client secret and tokens, or requests signed with the GitHub App private key, to that address (server-side request forgery). |
| pglogical's apply worker does not sufficiently validate the length of certain fields in incoming replication protocol messages before copying them, resulting in an out-of-bounds read. A party acting as the publisher for a subscription, for example a non-PostgreSQL endpoint that speaks the pglogical replication protocol, can return crafted messages that cause the subscriber's apply worker to read beyond the bounds of an allocated buffer, disclosing adjacent process memory or crashing the worker. To exploit the issue an attacker must be able to direct a subscription at an endpoint they control. In default installations this requires privileges normally reserved for a superuser, so the issue is most relevant to managed deployments where the ability to create subscriptions has been delegated to non-superuser roles. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: block: fix GenDisk cleanup paths
GenDiskBuilder::build() still has fallible work after
__blk_mq_alloc_disk(), but its error path only recovers the
foreign queue data. That leaks the temporary gendisk and
request_queue until later teardown. If the caller moved the last
Arc<TagSet<T>> into build(), the leaked queue can retain blk-mq
state after the tag set is dropped.
Fix the pre-registration failure path by dropping the temporary
gendisk reference with put_disk() before recovering queue_data,
so disk_release() can tear down the owned queue.
Also pair GenDisk::drop() with put_disk() after del_gendisk().
Once a Rust GenDisk has been added with device_add_disk(),
del_gendisk() only unregisters it; the final gendisk reference
still has to be dropped to complete the release path. |
| KUSANAGI provided by GMO Prime Strategy Co., Ltd. contains an HTTP header injection vulnerability that may allow arbitrary HTTP headers to be injected into the HTTP response when a user accesses a specially crafted URL. |
| Insecure storage of sensitive information issue exists in SS1 provided by DOS Co., Ltd. Sensitive information used by the product may be obtained. |
| Effekseer improperly validates "effect" files. When a crafted effect file is loaded to the affected runtime, the host process may be forced to crash. |
| Path Traversal vulnerability exists in SS1/ SS1 Cloud provided by DOS Co., Ltd. and the ODM product rocoeyes provided by Rococo Co. Ltd. Arbitrary files may be deleted. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: NFIT: core: Fix possible NULL pointer dereference
After commit 9b311b7313d6 ("ACPI: NFIT: Install Notify() handler before
getting NFIT table"), acpi_nfit_probe() installs an ACPI notify handler
for the NFIT device before checking the presence of the NFIT table. If
that table is not there, 0 is returned without allocating the acpi_desc
object and setting the driver data pointer of the NFIT device. If the
platform firmware triggers an NFIT_NOTIFY_UC_MEMORY_ERROR notification
on the NFIT device at that point, acpi_nfit_uc_error_notify() will
dereference a NULL pointer.
Prevent that from occurring by adding an acpi_desc check against NULL
to acpi_nfit_uc_error_notify(). |
| Insertion of Sensitive Information Into Sent Data vulnerability in IdeaBox Creations PowerPack Addons for Elementor powerpack-lite-for-elementor allows Retrieve Embedded Sensitive Data.This issue affects PowerPack Addons for Elementor: from n/a through 3.1.3. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: fix hdrlen overflow in ipv6_rpl_srh_decompress()
ipv6_rpl_srh_decompress() computes:
outhdr->hdrlen = (((n + 1) * sizeof(struct in6_addr)) >> 3);
hdrlen is __u8. For n >= 127 the result exceeds 255 and silently
truncates. With n=127 (cmpri=15, cmpre=15, pad=0, hdrlen=16):
(128 * 16) >> 3 = 256, truncated to 0 as __u8
The caller in ipv6_rpl_srh_rcv() then places the compressed header
at buf + ((ohdr->hdrlen + 1) << 3). With hdrlen=0 this is buf + 8,
but the decompressed region occupies buf[0..2055] (8-byte header
plus 128 full addresses). The compressed header overlaps the
decompressed data, and ipv6_rpl_srh_compress() writes into this
overlap, corrupting the routing header of the forwarded packet.
The existing guard at exthdrs.c:546 checks (n + 1) > 255, which
prevents n+1 from overflowing unsigned char (the segments_left
field), but does not prevent the computed hdrlen from overflowing
__u8. n=127 passes because 128 <= 255, yet hdrlen=256 does not
fit.
Tighten the bound to (n + 1) > 127. This caps n at 126, giving
hdrlen = (127 * 16) >> 3 = 254, which fits in __u8. The compressed
header then lands at buf + ((254 + 1) << 3) = buf + 2040, exactly
past the decompressed region (buf[0..2039]). No overlap. 127
segments is well beyond any realistic RPL deployment. |
| The Dynific Addons for Elementor (formerly Anywhere Elementor) WordPress plugin before 1.3.1 does not perform a status or capability check when resolving post identifiers passed to one of its shortcodes, allowing authenticated users with at least the Contributor role to disclose the content of other users' draft, private and password-protected posts. An Author can republish that content to anonymous visitors. |
| The Dynific Addons for Elementor (formerly Anywhere Elementor) WordPress plugin before 1.3.1 does not perform a capability or nonce check on an AJAX action that saves its module configuration, allowing any authenticated user, including Subscribers, to enable or disable the Dynific Addons for Elementor (formerly Anywhere Elementor) WordPress plugin before 1.3.1's modules site-wide. |
| The Dynific Addons for Elementor (formerly Anywhere Elementor) WordPress plugin before 1.3.1 does not escape the post title before outputting it in a quoted HTML attribute in one of its Elementor widgets, allowing authenticated users with the Author role to publish a post whose title executes as script in the session of anyone, including an administrator, who views it, resulting in Stored Cross-Site Scripting. |
| The Dynific Addons for Elementor (formerly Anywhere Elementor) WordPress plugin before 1.3.1 does not escape a user-controlled profile value before outputting it in a quoted attribute in one of its Elementor widgets, allowing authenticated users with the Author role to store a payload that executes in the session of anyone, including an administrator, who views a post the attacker authored, resulting in Stored Cross-Site Scripting. |
| The AutomatorWP WordPress plugin before 6.0.8 does not bind the requests that complete its Zoom and AWeber integration connections to the administrator who started them, allowing attackers to make a logged-in administrator replace the stored integration credentials with the attacker's own via a CSRF attack, diverting the data the site sends to those services into an account the attacker controls. Exploitation requires the integration to already be connected and knowledge of the site's OAuth client identifier. |
| The Photo Engine (Media Organizer & Lightroom) WordPress plugin before 6.6.2 does not sanitise and escape keyword names before storing them and outputting them on its debugging page, allowing users with the Author role and above to perform Stored Cross-Site Scripting attacks against administrators who have enabled that page. |
| The Live Composer WordPress plugin before 2.1.24 does not escape several attributes of one of its page-builder shortcodes before outputting them inside HTML tag attributes, allowing users with the Contributor role and above to store a payload that executes in the browser of anyone who views the post, including an administrator reviewing the pending submission. |
| The Schema & Structured Data for WP & AMP WordPress plugin before 1.70 does not check that the importing user may edit the posts named in a settings backup, nor restrict the import to its own post types, allowing users whose role an administrator has granted access to the Schema & Structured Data for WP & AMP WordPress plugin before 1.70's settings to modify, re-author, unpublish or trash any post or page on the site and write arbitrary post meta. |