| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wi-Fi Protected Access (WPA and WPA2) allows reinstallation of the Tunneled Direct-Link Setup (TDLS) Peer Key (TPK) during the TDLS handshake, allowing an attacker within radio range to replay, decrypt, or spoof frames. |
| On Hoermann BiSecur devices before 2018, a vulnerability can be exploited by recording a single radio transmission. An attacker can intercept an arbitrary radio frame exchanged between a BiSecur transmitter and a receiver to obtain the encrypted packet and the 32-bit serial number. The interception of the one-time pairing process is specifically not required. Due to use of AES-128 with an initial static random value and static data vector (all of this static information is the same across different customers' installations), the attacker can easily derive the utilized encryption key and decrypt the intercepted packet. The key can be verified by decrypting the intercepted packet and checking for known plaintext. Subsequently, an attacker can create arbitrary radio frames with the correct encryption key to control BiSecur garage and entrance gate operators and possibly other BiSecur systems as well ("wireless cloning"). To conduct the attack, a low cost Software Defined Radio (SDR) is sufficient. This affects Hoermann Hand Transmitter HS5-868-BS, HSE1-868-BS, and HSE2-868-BS devices. |
| A door-unlocking issue was discovered on Software House iStar Ultra devices through 6.5.2.20569 when used in conjunction with the IP-ACM Ethernet Door Module. The communications between the IP-ACM and the iStar Ultra is encrypted using a fixed AES key and IV. Each message is encrypted in CBC mode and restarts with the fixed IV, leading to replay attacks of entire messages. There is no authentication of messages beyond the use of the fixed AES key, so message forgery is also possible. |
| Invision Power Services (IPS) Community Suite before 4.1.9 makes session hijack easier by relying on the PHP uniqid function without the more_entropy flag. Attackers can guess an Invision Power Board session cookie if they can predict the exact time of cookie generation. |
| Under certain circumstances, the ix86_expand_builtin function in i386.c in GNU Compiler Collection (GCC) version 4.6, 4.7, 4.8, 4.9, 5 before 5.5, and 6 before 6.4 will generate instruction sequences that clobber the status flag of the RDRAND and RDSEED intrinsics before it can be read, potentially causing failures of these instructions to go unreported. This could potentially lead to less randomness in random number generation. |
| ntp-keygen in ntp 4.2.8px before 4.2.8p2-RC2 and 4.3.x before 4.3.12 does not generate MD5 keys with sufficient entropy on big endian machines when the lowest order byte of the temp variable is between 0x20 and 0x7f and not #, which might allow remote attackers to obtain the value of generated MD5 keys via a brute force attack with the 93 possible keys. |
| The Bitcoin Proof-of-Work algorithm does not consider a certain attack methodology related to 80-byte block headers with a variety of initial 64-byte chunks followed by the same 16-byte chunk, multiple candidate root values ending with the same 4 bytes, and calculations involving sqrt numbers. This violates the security assumptions of (1) the choice of input, outside of the dedicated nonce area, fed into the Proof-of-Work function should not change its difficulty to evaluate and (2) every Proof-of-Work function execution should be independent. NOTE: a number of persons feel that this methodology is a benign mining optimization, not a vulnerability |
| Poor cryptographic salt initialization in admin/inc/template_functions.php in GetSimple CMS 3.3.13 allows a network attacker to escalate privileges to an arbitrary user or conduct CSRF attacks via calculation of a session cookie or CSRF nonce. |
| Pulp before 2.8.5 uses bash's $RANDOM in an unsafe way to generate passwords. |
| passwd_recovery.lua on the TP-Link Archer C9(UN)_V2_160517 allows an attacker to reset the admin password by leveraging a predictable random number generator seed. This is fixed in C9(UN)_V2_170511. |
| wp-admin/user-new.php in WordPress before 4.9.1 sets the newbloguser key to a string that can be directly derived from the user ID, which allows remote attackers to bypass intended access restrictions by entering this string. |
| The Codextrous B2J Contact (aka b2j_contact) extension before 2.1.13 for Joomla! allows prediction of a uniqid value based on knowledge of a time value. This makes it easier to read arbitrary uploaded files. |
| Lemur 0.1.4 does not use sufficient entropy in its IV when encrypting AES in CBC mode. |
| ExpressionEngine version 2.x < 2.11.8 and version 3.x < 3.5.5 create an object signing token with weak entropy. Successfully guessing the token can lead to remote code execution. |
| A vulnerability in Cisco Jabber for Windows could allow an unauthenticated, local attacker to access sensitive communications made by the Jabber client. An attacker could exploit this vulnerability to gain information to conduct additional attacks. The vulnerability is due to the way Cisco Jabber for Windows handles random number generation for file folders. An attacker could exploit the vulnerability by fixing the random number data used to establish Secure Sockets Layer (SSL) connections between clients. An exploit could allow the attacker to decrypt secure communications made by the Cisco Jabber for Windows client. Cisco Bug IDs: CSCve44806. |
| An Insufficient Entropy issue was discovered in LOYTEC LVIS-3ME versions prior to 6.2.0. The application does not utilize sufficiently random number generation for the web interface authentication mechanism, which could allow remote code execution. |
| A Predictable Value Range from Previous Values issue was discovered in Rockwell Automation Allen-Bradley MicroLogix 1100 programmable-logic controllers 1763-L16AWA, Series A and B, Version 16.00 and prior versions; 1763-L16BBB, Series A and B, Version 16.00 and prior versions; 1763-L16BWA, Series A and B, Version 16.00 and prior versions; and 1763-L16DWD, Series A and B, Version 16.00 and prior versions and Allen-Bradley MicroLogix 1400 programmable logic controllers 1766-L32AWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWAA, Series A and B, Version 16.00 and prior versions; 1766-L32BXB, Series A and B, Version 16.00 and prior versions; 1766-L32BXBA, Series A and B, Version 16.00 and prior versions; and 1766-L32AWAA, Series A and B, Version 16.00 and prior versions. Insufficiently random TCP initial sequence numbers are generated, which may allow an attacker to predict the numbers from previous values. This may allow an attacker to spoof or disrupt TCP connections, resulting in a denial of service for the target device. |
| wp-includes/ms-functions.php in the Multisite WordPress API in WordPress before 4.7.1 does not properly choose random numbers for keys, which makes it easier for remote attackers to bypass intended access restrictions via a crafted (1) site signup or (2) user signup. |
| PWR-Q200 does not use random values for source ports of DNS query packets, which allows remote attackers to conduct DNS cache poisoning attacks. |
| The aescrypt gem 1.0.0 for Ruby does not randomize the CBC IV for use with the AESCrypt.encrypt and AESCrypt.decrypt functions, which allows attackers to defeat cryptographic protection mechanisms via a chosen plaintext attack. |
