| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in sparklemotion nokogiri c29c920907366cb74af13b4dc2230e9c9e23b833. It has been classified as problematic. This affects the function hashmap_get_with_hash of the file gumbo-parser/src/hashmap.c. The manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The patch is named ada4708e5a67114402cd3feb70a4e1d1d7cf773a. It is recommended to apply a patch to fix this issue. The project maintainer explains that the affected code was merged into the main branch but the commit never appeared in an official release. |
| There is a Denial of Service（DoS）vulnerability in the ZTE MC889A Pro product. Due to insufficient validation of the input parameters of the Short Message Service interface, allowing an attacker to exploit it to carry out a DoS attack. |
| A vulnerability was determined in appneta tcpreplay up to 4.5.2-beta2. The impacted element is the function untrunc_packet of the file src/tcpedit/edit_packet.c of the component tcprewrite. Executing manipulation can lead to use after free. It is possible to launch the attack on the local host. The exploit has been publicly disclosed and may be utilized. This patch is called 73008f261f1cdf7a1087dc8759115242696d35da. Applying a patch is advised to resolve this issue. |
| CNCF K3s 1.32 before 1.32.4-rc1+k3s1 has a Kubernetes kubelet configuration change with the unintended consequence that, in some situations, ReadOnlyPort is set to 10255. For example, the default behavior of a K3s online installation might allow unauthenticated access to this port, exposing credentials. |
| A vulnerability was found in sparklemotion nokogiri c29c920907366cb74af13b4dc2230e9c9e23b833 and classified as problematic. This issue affects the function hashmap_set_with_hash of the file gumbo-parser/src/hashmap.c. The manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The identifier of the patch is ada4708e5a67114402cd3feb70a4e1d1d7cf773a. It is recommended to apply a patch to fix this issue. The project maintainer explains that the affected code was merged into the main branch but the commit never appeared in an official release. |
| Improper isolation in the Intel(R) Core(TM) Ultra Processor stream cache mechanism may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. Himmelblau 0.9.x derives numeric GIDs for Entra ID groups from the group display name when himmelblau.conf `id_attr_map = name` (the default configuration). Because Microsoft Entra ID allows multiple groups with the same `displayName` (including end-user–created personal/O365 groups, depending on tenant policy), distinct directory groups can collapse to the same numeric GID on Linux. This issue only applies to Himmelblau versions 0.9.0 through 0.9.22. Any resource or service on a Himmelblau-joined host that enforces authorization by numeric GID (files/dirs, etc.) can be unintentionally accessible to a user who creates or joins a different Entra/O365 group that happens to share the same `displayName` as a privileged security group. Users should upgrade to 0.9.23, or 1.0.0 or later, to receive a patch. Group to GID mapping now uses Entra ID object IDs (GUIDs) and does not collide on same-name groups. As a workaround, use tenant policy hardening to restrict arbitrary group creation until all hosts are patched. |
| Improper buffer restrictions in the firmware for some Intel(R) TDX may allow a privileged user to potentially enable escalation of privilege via local access. |
| WilderForge is a Wildermyth coremodding API. A critical vulnerability has been identified in multiple projects across the WilderForge organization. The issue arises from unsafe usage of `${{ github.event.review.body }}` and other user controlled variables directly inside shell script contexts in GitHub Actions workflows. This introduces a code injection vulnerability: a malicious actor submitting a crafted pull request review containing shell metacharacters or commands could execute arbitrary shell code on the GitHub Actions runner. This can lead to arbitrary command execution with the permissions of the workflow, potentially compromising CI infrastructure, secrets, and build outputs. Developers who maintain or contribute to the repos WilderForge/WilderForge, WilderForge/ExampleMod, WilderForge/WilderWorkspace, WilderForge/WildermythGameProvider, WilderForge/AutoSplitter, WilderForge/SpASM, WilderForge/thrixlvault, WilderForge/MassHash, and/or WilderForge/DLC_Disabler; as well as users who fork any of the above repositories and reuse affected GitHub Actions workflows, are affected. End users of any the above software and users who only install pre-built releases or artifacts are not affected. This vulnerability does not impact runtime behavior of the software or compiled outputs unless those outputs were produced during exploitation of this vulnerability. A current workaround is to disable GitHub Actions in affected repositories, or remove the affected workflows. |
| A vulnerability was identified in floooh sokol up to 5d11344150973f15e16d3ec4ee7550a73fb995e0. The impacted element is the function _sg_validate_pipeline_desc in the library sokol_gfx.h. Such manipulation leads to stack-based buffer overflow. The attack must be carried out locally. The exploit is publicly available and might be used. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed. The name of the patch is b95c5245ba357967220c9a860c7578a7487937b0. It is best practice to apply a patch to resolve this issue. |
| Improper Access Control in an on-chip debug interface could allow a privileged attacker to enable a debug interface and potentially compromise data confidentiality or integrity. |
| Use of unmaintained third party components for some Intel(R) Processor Identification Utility before version 8.0.43 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with an authenticated user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability in warmcat libwebsockets allows Pointer Manipulation, potentially leading to out-of-bounds memory access. This issue affects libwebsockets before 4.3.4 and is present in code built specifically for the Win32 platform.
By default, the affected code is not executed unless one of the following conditions is met:
LWS_WITHOUT_EXTENSIONS (default ON) is manually set to OFF in CMake.
LWS_WITH_HTTP_STREAM_COMPRESSION (default OFF) is manually set to ON in CMake.
Despite these conditions, when triggered in affected configurations, this vulnerability may allow attackers to manipulate pointers, potentially leading to memory corruption or unexpected behavior. |
| A vulnerability was found in D-Link DIR-513 up to 20190831. It has been declared as critical. This vulnerability affects the function formSetWanDhcpplus of the file /goform/formSetWanDhcpplus. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer. |
| The Honeywell Experion PKS and OneWireless WDM contains a Memory Buffer vulnerability in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to an Overread Buffers, which could result in improper index validation against buffer borders leading to remote code execution.
Honeywell recommends updating to the most recent version of Honeywell Experion PKS:
520.2 TCU9 HF1 and 530.1 TCU3 HF1 and OneWireless: 322.5 and 331.1.
The affected Experion PKS products are C300 PCNT02, C300 PCNT05, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3.The OneWireless WDM affected versions are 322.1 through 322.4 and 330.1 through 330.3. |
| Unauthenticated log effects metrics gathering incident response efforts and potentially exposes risk of injection attacks (ex log injection). |
| Incorrect configuration of replication security in the MariaDB component of the infra-operator in YAOOK Operator allows an on-path attacker to read database contents, potentially including credentials |
| Insecure default settings have been found in recorder products provided by Yokogawa Electric Corporation. The default setting of the authentication function is disabled on the affected products. Therefore, when connected to a network with default settings, anyone can access all functions related to settings and operations. As a result, an attacker can illegally manipulate and configure important data such as measured values and settings.
This issue affects GX10 / GX20 / GP10 / GP20 Paperless Recorders: R5.04.01 or earlier; GM Data Acquisition System: R5.05.01 or earlier; DX1000 / DX2000 / DX1000N Paperless Recorders: R4.21 or earlier; FX1000 Paperless Recorders: R1.31 or earlier; μR10000 / μR20000 Chart Recorders: R1.51 or earlier; MW100 Data Acquisition Units: All versions; DX1000T / DX2000T Paperless Recorders: All versions; CX1000 / CX2000 Paperless Recorders: All versions. |
| A security issue exists within DataMosaix™ Private Cloud allowing for Persistent XSS. This vulnerability can result in the execution of malicious JavaScript, allowing for account takeover, credential theft, or redirection to a malicious website. |
| A weakness has been identified in OGRECave Ogre up to 14.4.1. Impacted is the function STBIImageCodec::encode of the file /ogre/PlugIns/STBICodec/src/OgreSTBICodec.cpp. This manipulation causes mismatched memory management routines. The attack is restricted to local execution. The exploit has been made available to the public and could be exploited. |
