| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx()
On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one
sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[]
shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma()
dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader()
writes two such indices into meta->buffers[], which rb_cpu_meta_valid()
would reject on the next boot, discarding the previous boot's trace.
A CPU's sub-buffer array starts after its meta header and the nr_subbufs
integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx()
inverts that calculation but skips only the integers, not the header, so
its base is one sub-buffer low whenever the omitted header size crosses
the alignment boundary.
Invert the calculation with rb_subbufs_from_meta() rather than repeating
it. rb_range_buffer() maps an index back to an address through the same
helper, so the two directions can no longer disagree. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Do not show buffer_meta for CPUs without a buffer
The per_cpu/cpuN/buffer_meta files are created for every possible CPU,
but buffer->buffers[cpu] is only allocated once that CPU comes online.
Reading the file of a CPU that never came online dereferences a NULL
cpu_buffer in rbm_start().
Fail the open with -ENODEV when the CPU has no buffer, as the other
per CPU ring buffer interfaces do. |
| A flaw was found in libsoup, where the soup_message_headers_get_content_disposition() function is vulnerable to a NULL pointer dereference. This flaw allows a malicious HTTP peer to crash a libsoup client or server that uses this function. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Validate the ITT reflected in a Reject PDU
A Reject PDU carries a copy of the header it rejects, and
iscsi_handle_reject() takes the ITT out of that copy to find the task to
clean up:
memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr));
...
task = iscsi_itt_to_task(conn, rejected_pdu.itt);
That value is whatever the target put there. iscsi_itt_to_task() bounds
the index against cmds_max and checks nothing else, so any task in the
pool can be named, and iscsi_nop_out_rsp() then completes it.
An index that has never been used gives a NULL task->conn: the pool is
zeroed at session setup and conn is assigned only when a task is
allocated. If the task was used and returned, iscsi_complete_task() hits
its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount
underflows. An in-flight SCSI command is completed as successful - a 1
MiB read returned 1048576 with none of its buffer written and no
warning.
Validate the reflected ITT the way iscsi_itt_to_ctask() validates a
command ITT, and require the task to be in flight and not a SCSI
command.
[ 6.248477] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI
[ 6.249357] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
[ 6.249951] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy)
[ 6.250718] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 6.251616] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160
[ 6.252043] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00
[ 6.252813] RSP: 0018:ffff88806c907b80 EFLAGS: 00010206
[ 6.253042] RAX: dffffc0000000000 RBX: ffff88800607e000 RCX: ffffffff8d571a25
[ 6.253345] RDX: 000000000000000c RSI: ffff88806c907c38 RDI: 0000000000000060
[ 6.253642] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff235a504
[ 6.253947] R10: 0000000000000003 R11: 7463656e6e6f6320 R12: 0000000000000000
[ 6.254251] R13: 0000000000000000 R14: ffff88806c907c38 R15: 0000000000000000
[ 6.254549] FS: 0000000000000000(0000) GS:ffff8880d95bc000(0000) knlGS:0000000000000000
[ 6.254887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.255140] CR2: 00007fc393e8ffc0 CR3: 0000000005252006 CR4: 0000000000770ef0
[ 6.255439] PKRU: 55555554
[ 6.255564] Call Trace:
[ 6.255674] <IRQ>
[ 6.255768] __iscsi_complete_pdu+0x18bf/0x22a0
[ 6.256733] iscsi_complete_pdu+0x54/0xa0
[ 6.256905] iscsi_tcp_data_recv_done+0xf4/0x250
[ 6.257103] iscsi_tcp_recv_skb+0x31e/0xec0
[ 6.257680] iscsi_sw_tcp_recv+0x12f/0x390
[ 6.258061] __tcp_read_sock+0x1ab/0x810
[ 6.258853] iscsi_sw_tcp_data_ready+0x18b/0x510
[ 6.259808] tcp_data_queue+0x1f13/0x4cd0
[ 6.260567] tcp_rcv_established+0x8a5/0x3a00
[ 6.261931] tcp_v4_do_rcv+0x449/0x960
[ 6.262269] tcp_v4_rcv+0x2245/0x3bc0 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Validate the task named by a management response
__iscsi_complete_pdu() fetches the task for five response types from one
place and checks only that the index resolved:
case ISCSI_OP_LOGOUT_RSP:
case ISCSI_OP_LOGIN_RSP:
case ISCSI_OP_TEXT_RSP:
case ISCSI_OP_SCSI_TMFUNC_RSP:
case ISCSI_OP_NOOP_IN:
task = iscsi_itt_to_task(conn, hdr->itt);
if (!task)
return ISCSI_ERR_BAD_ITT;
iscsi_itt_to_task() bounds the index against cmds_max and looks at
nothing else, so a target can name any slot in the pool, including one
that has never been used. task->conn is then NULL, and both
iscsi_nop_out_rsp() and iscsi_complete_task() dereference it. One
unsolicited NOP-In is enough; a Text Response carrying the same ITT
crashes in iscsi_complete_task() instead.
Require the task to be in flight and not a SCSI command, the way
iscsi_itt_to_ctask() does for the command opcodes.
[ 6.298634] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI
[ 6.298642] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
[ 6.298652] CPU: 1 UID: 0 PID: 111 Comm: iscsistart Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy)
[ 6.298654] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 6.298656] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160
[ 6.298691] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00
[ 6.298698] RSP: 0018:ffff88806c907be8 EFLAGS: 00010206
[ 6.298701] RAX: dffffc0000000000 RBX: ffff888006116800 RCX: 0000000000000020
[ 6.298702] RDX: 000000000000000c RSI: ffff88800525d578 RDI: 0000000000000060
[ 6.298703] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 6.298706] R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000
[ 6.298706] R13: 000000000000002e R14: ffff8880056eb440 R15: ffff888006116800
[ 6.298707] FS: 00007fc02d1c2740(0000) GS:ffff8880b29bc000(0000) knlGS:0000000000000000
[ 6.298710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.298711] CR2: 000055fe3b56ddf8 CR3: 00000000053b9004 CR4: 0000000000770ef0
[ 6.298712] PKRU: 55555554
[ 6.298713] Call Trace:
[ 6.298714] <IRQ>
[ 6.298714] __iscsi_complete_pdu+0x13a8/0x22a0
[ 6.298758] iscsi_complete_pdu+0x54/0xa0
[ 6.298759] iscsi_tcp_hdr_recv_done+0x870/0x2c80
[ 6.298778] iscsi_tcp_recv_skb+0x31e/0xec0
[ 6.298800] iscsi_sw_tcp_recv+0x12f/0x390
[ 6.298804] __tcp_read_sock+0x1ab/0x810
[ 6.298812] iscsi_sw_tcp_data_ready+0x18b/0x510
[ 6.298814] tcp_rcv_established+0x1f56/0x3a00
[ 6.298842] tcp_v4_do_rcv+0x449/0x960
[ 6.298847] tcp_v4_rcv+0x2245/0x3bc0 |
| Open Neural Network Exchange (ONNX) is an open standard for machine learning interoperability. From 1.4.0 until 1.22.0, ScanInferenceFunction, ScanInferenceFunction_opset8, and ScanInferenceFunction_opset9 do not safely validate the required num_scan_inputs attribute. A missing attribute is dereferenced as a null pointer, while a negative value is converted to size_t and can reach an exceptional oversized allocation path. An untrusted model can therefore terminate or disrupt shape inference, including a negative-value model that can pass onnx.checker.check_model(). This issue is fixed in version 1.22.0. |
| libcss through 0.9.2 contains a NULL pointer dereference vulnerability in mq_parse_media_query() that allows remote attackers to crash consumers by supplying media lists ending in a comma. Attackers can serve a stylesheet whose @media or @import media list has a trailing comma, causing NetSurf or other parsers to crash. |
| mouse07410/asn1c is an ASN.1 compiler. Prior to 1.2.5, `OPEN TYPE` decoding can dereference an unallocated member pointer and crash the consuming program. `OPEN_TYPE_aper_get` in `OPEN_TYPE_aper.c`, `OPEN_TYPE_ber_get` in `OPEN_TYPE_ber.c`, `OPEN_TYPE_oer_get` in `OPEN_TYPE_oer.c`, and `OPEN_TYPE_uper_get` in `OPEN_TYPE_uper.c` share the pattern: a conditional null check on `*memb_ptr2` resets presence only when the member exists, but execution then unconditionally computes an inner value from that pointer and a member offset. If the `OPEN TYPE` member has not been allocated, the null-pointer arithmetic and subsequent read cause a segmentation fault. The advisory demonstrates UPER and APER crashes for `E2connectionUpdateAcknowledge`, notes that `E2AP` uses APER, and provides a BER reproducer; OER is also explicitly identified as affected. This issue is fixed in version 1.2.5. |
| i18next is an internationalization framework for JavaScript. Prior to version 26.3.4, `deepExtend` in `src/utils.js` checks property existence with the in operator and recurses into inherited built-ins reached through `Object.prototype`. An application must explicitly pass attacker-controlled resource data to `addResourceBundle(lng, ns, data, deep, overwrite)` with both `deep: true` and `overwrite: true`. Source keys such as `hasOwnProperty`, `toString` and `valueOf` can then select shared inherited built-in function objects, and a nested value can overwrite a property of those objects process-wide. For example, making `Object.prototype.hasOwnProperty.call` non-callable causes subsequent uses, including i18next internals, to throw TypeError, resulting in unrecoverable denial of service and limited integrity impact. The `__proto__`/`constructor` guard does not prevent this mechanism because the corruption target is an inherited built-in function rather than the prototype object itself. Default calls without deep merging or with overwrite falsy are unaffected, and no standard i18next backend or integration uses the vulnerable configuration. This issue is distinct from the setPath/key-walking prototype-pollution flaws in i18next-fs-backend (CVE-2026-48713) and i18next-http-middleware (CVE-2026-48714). This issue is fixed in version 26.3.4. |
| Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection') vulnerability in Drupal Entity List allows Reflection Injection. This issue affects Entity List versions: from 0.0.0 to 3.0.10. |
| ESPAsyncWebServer is an asynchronous HTTP and WebSocket server library for ESP32, ESP8266, RP2040 and RP2350. Prior to version 3.11.2, the multipart parser in `src/WebRequest.cpp` frees `_itemBuffer` and sets it to NULL when `BOUNDARY_OR_DATA` matches the closing boundary of a file part, before confirming the following terminator, while leaving `_itemIsFile` true. If the next byte is neither the final closing dashes nor a clean CRLF, the `DASH3_OR_RETURN2` or `EXPECT_FEED2` rewind branch re-injects provisionally consumed bytes through `itemWriteByte`. Because `_itemIsFile` remains true, `_itemBuffer`[`_itemBufferIndex`++] writes through a null pointer. On ESP32 this causes a `StoreProhibited` exception, panic and device reboot, producing remote denial of service. A route with a non-trivial body/upload handler, such as a file-upload or web-OTA endpoint, must be present. This issue is fixed in version 3.11.2. |
| LibreDWG is a free C library to read and write DWG files. Prior to 0.14, `bit_TV_to_utf8()` in `src/bits.c` can write to the caller-provided `src` buffer despite accepting const input. On an `iconv()` error other than `E2BIG`, the function frees its output buffer and passes the original input alias to `bit_u_expand()`, which expands or shrinks Unicode and multibyte escape sequences in place. If the input is a string literal, read-only mapping, or other immutable buffer, the write can cause a segmentation fault and denial of service; mutable caller-owned input can be unexpectedly modified before being returned. This affects applications that expose the conversion API to untrusted input under those conditions. Direct file-triggered exploitability through normal DWG decode/export paths remains unconfirmed because many TV strings are heap allocated by bit_read_TV(). This issue is fixed in version 0.14. |
| Picotls is a TLS protocol library that allows users select different crypto backends based on their use case. In affected revisions through 44bc503, when picotls is used as a `client-side TLS stack`, a peer can send a `HelloRetryRequest` followed by a `spoofed Hello message` that causes a null-pointer dereference. This can terminate the consuming process, including a process performing other work, resulting in denial of service. This issue is fixed in commit a06ca41. |
| A flaw was found in the H.264 video parser in gst-plugins-bad. When processing a specially crafted H.264 video file with malformed Multiview (MVC) Sequence Parameter Set data, the parser can dereference a NULL pointer during the cleanup of partially allocated internal structures after a parse failure. This can cause the application using GStreamer to crash, resulting in a denial of service. |
| A flaw was found in GStreamer's gst-plugins-base MicroDVD subtitle parser. When processing a specially crafted subtitle file, the parser may dereference a NULL pointer, causing the application to crash when a user opens or plays media with a malformed MicroDVD (.sub) subtitle file. |
| Nezha 2.0.0 before 2.4.0 contains a NULL pointer dereference vulnerability in ServiceSentinel.loadTodayStats that allows authenticated users to crash the dashboard by deleting a service. Attackers can delete their own service via POST /api/v1/batch-delete/service, leaving orphaned service_histories rows that crash the non-TSDB dashboard on its next startup until removed manually. |
| A NULL pointer dereference vulnerability in the Qt QCborValue to JSON conversion of the Qt Core module. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: ccg: reject firmware images without a ':' record header
do_flash() locates the first .cyacd record with
p = strnchr(fw->data, fw->size, ':');
while (p < eof) {
s = strnchr(p + 1, eof - p - 1, ':');
...
}
If the firmware image contains no ':' byte, strnchr() returns NULL.
NULL compares less than the valid kernel pointer eof, so the loop body
runs and strnchr() is called with p + 1 == (void *)1 and a length of
roughly (unsigned long)eof, causing a wonderful crash.
The not_signed_fw fallthrough earlier in do_flash() and the chip-state
branches in ccg_fw_update_needed() allow an unsigned blob to reach this
loop, so a root user who can place a crafted file under /lib/firmware
and write the do_flash sysfs attribute can trigger the oops.
Bail out with -EINVAL when the initial strnchr() returns NULL. |
| sniproxy through 0.7.0 contains a NULL pointer dereference vulnerability in resolv_cancel() that allows remote unauthenticated attackers to crash the daemon by sending overlong hostnames. Attackers can send a 254 or 255 character TLS SNI name or HTTP Host header matching a wildcard backend, then close the connection to terminate the proxy. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used forge.tls.createConnection(), fragmented handshake message, interleaved record to process the relevant input or security decision. node-forge continued processing after a TLS record of another content type interrupted a fragmented handshake message. A remote peer could trigger an uncaught TypeError in process(), causing the connection or hosting process to fail. This issue is fixed in version 1.4.1. |
