| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART=y that never overrode the PSKd therefore shipped with a publicly known joining credential compiled in, with no build-time or run-time warning.
The PSKd is the only value that authenticates Thread commissioning: joiner and commissioner run a DTLS-PSK handshake keyed on it, after which the commissioner supplies the full operational dataset. In ot_configure_instance() (modules/openthread/openthread.c), a device with no stored dataset calls otJoinerStart() with the configured PSKd, and ot_joiner_start_handler() calls otThreadSetEnabled() on success. An unauthenticated attacker within 802.15.4 radio range of an uncommissioned device (factory-fresh, after a factory reset, or after a settings erase) can run any stock Thread commissioner registered with J01NME, complete the handshake, and hand the device an attacker-controlled operational dataset.
The device then joins and enables Thread on the attacker's mesh. The attacker becomes its router, seeing, dropping, injecting and spoofing all of the device's IPv6 traffic and impersonating the peers the application expects, while the device is cut off from the network it was meant to join and stays mis-provisioned until it is reset. Only application-layer security with independently provisioned credentials survives. Exposure is limited to builds that enable joiner autostart and leave the PSKd unset; the option is not enabled by default and no in-tree sample uses the vulnerable combination.
The fix removes the default from CONFIG_OPENTHREAD_JOINER_PSKD and adds a BUILD_ASSERT() in modules/openthread/openthread.c, active only under CONFIG_OPENTHREAD_JOINER_AUTOSTART, that fails the build unless a 6-to-32-character PSKd is configured. Products should provision a per-device PSKd from factory data and call otJoinerStart() from the application rather than relying on a credential compiled identically into every unit. |
| Missing Origin Validation in WebSockets (CWE-1385) and Permissive Cross-domain Policy with Untrusted Domains (CWE-942) in the development web server (ADK Web) in Google Agent Development Kit (ADK) for Java (com.google.adk:google-adk-dev versions 0.1.0 before 1.13.0 and com.google.adk:google-adk-maven-plugin versions 0.3.0 before 1.13.0) allow a remote attacker to control a locally running agent and read its data via a malicious web page visited by a developer while the server is running. The /run_live WebSocket endpoint accepts connections from any origin by default (hardcoded via setAllowedOrigins("*") in versions 0.1.0 through 1.5.0, and defaulting to * via adk.web.cors.origins in versions 1.6.0 through 1.12.0), and since version 0.4.0 the REST API returns Access-Control-Allow-Origin: * by default. Because the server has no authentication and requests originate from the developer's browser (so binding to localhost does not prevent exploitation), a cross-origin page can send messages to the agent (triggering registered tools), stream agent responses, and list, read, create, or delete sessions and artifacts. In versions 1.6.0 through 1.12.0, users can mitigate the issue by setting the adk.web.cors.origins property to an explicit allowlist of trusted origins (such as http://localhost:8000). The vulnerability is fixed in version 1.13.0, which enforces a same-origin default for CORS and the /run_live WebSocket endpoint, and rejects DNS-rebinding requests over loopback. |
| A heap-buffer-overflow vulnerability exists in the APNG (Animated PNG) file loader of GIMP. This flaw occurs when the `fcTL` width exceeds the `IHDR` width, leading to pixel data being written past the end of a heap allocation. Additionally, a heap-based buffer overflow exists in the DDS plug-in due to a BPP mismatch in the `load_layer()` function. Both vulnerabilities can be triggered by opening a specially crafted image file, potentially leading to code execution. |
| A weakness has been identified in apidevtools json-schema-ref-parser. This impacts the function Refs.set/Pointer.set in the library lib/pointer.ts. Executing a manipulation can lead to improperly controlled modification of object prototype attributes. The attack can be launched remotely. Upgrading to version 15.3.6 will fix this issue. This patch is called a786bc6afc3674f650496472ee93d5cf74c4bd84. It is suggested to upgrade the affected component. The project maintainer confirms: "I reproduced prototype pollution through the public $Refs.set() API in published versions 7.1.4, 9.0.0, 11.0.0, 14.0.0, 14.2.1, 15.3.0, and 15.3.5. The same pointer is rejected by 15.3.6 without modifying Object.prototype. This reported path requires an application to pass an attacker-controlled pointer to $Refs.set(); dependency presence alone does not establish exploitability." |
| A vulnerability was detected in Delgan loguru 0.7.3. The affected element is the function AnsiParser.feed of the file loguru/_colorizer.py of the component ANSI Color-Markup Parser. Performing a manipulation results in inefficient regular expression complexity. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| XS::libbrotli versions before 1.2.1.0 for Perl bundle a brotli library with an out-of-bounds write in the decoder.
Affected versions compile a bundled brotli into static archives that dependent XS modules link against at build time, rather than using the system library. The bundled copy, 1.0.7 or 1.1.0 across the range, carries the decoder out-of-bounds write described in CVE-2026-111497. Version 1.2.1.0 updates it to brotli 1.2.1.
XS::libbrotli has no Perl interface, so the decoder is reached through any dependent module that decompresses untrusted data with it. An attacker supplying a crafted brotli stream can corrupt decoder state, disclose memory, crash the process, or potentially execute arbitrary code. Upgrading the system brotli does not remediate this. |
| A malicious actor with access to the network could exploit a Binding to an Unrestricted IP Address vulnerability found in WiFiman Desktop to obtain information about the host device. |
| Tornado is a Python web framework and asynchronous networking library. Prior to 6.6, Tornado's HTTP header parser accepts obsolete line folding and repeatedly concatenates short continuation lines, causing quadratic CPU consumption on the IOLoop thread. An unauthenticated client can submit a header block containing many obsolete line-folding continuations before application code runs, blocking other connections served by the process. The cost grows with max_header_size, and only availability is affected. This issue is fixed in version 6.6. |
| A weakness has been identified in libimobiledevice up to 1.4.0. This issue affects the function service_receive of the file src/afc.c of the component AFC Service. Executing a manipulation can lead to double free. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| i18next is an internationalization framework for JavaScript. Prior to version 26.3.4, `deepExtend` in `src/utils.js` checks property existence with the in operator and recurses into inherited built-ins reached through `Object.prototype`. An application must explicitly pass attacker-controlled resource data to `addResourceBundle(lng, ns, data, deep, overwrite)` with both `deep: true` and `overwrite: true`. Source keys such as `hasOwnProperty`, `toString` and `valueOf` can then select shared inherited built-in function objects, and a nested value can overwrite a property of those objects process-wide. For example, making `Object.prototype.hasOwnProperty.call` non-callable causes subsequent uses, including i18next internals, to throw TypeError, resulting in unrecoverable denial of service and limited integrity impact. The `__proto__`/`constructor` guard does not prevent this mechanism because the corruption target is an inherited built-in function rather than the prototype object itself. Default calls without deep merging or with overwrite falsy are unaffected, and no standard i18next backend or integration uses the vulnerable configuration. This issue is distinct from the setPath/key-walking prototype-pollution flaws in i18next-fs-backend (CVE-2026-48713) and i18next-http-middleware (CVE-2026-48714). This issue is fixed in version 26.3.4. |
| Improper Neutralization of Special Elements Used in a Template Engine vulnerability in Drupal Inline Formatter Field allows Code Injection. This issue affects Inline Formatter Field versions: from 0.0.0 to 4.2.0. |
| Improper Neutralization of Special Elements Used in a Template Engine vulnerability in Drupal Linked Field allows Code Injection. This issue affects Linked Field versions: from 0.0.0 to 1.8.0. |
| The shipped WebUI template database retains the factory default passwords for all five account types in cleartext. Defaults are identical across devices and were unchanged on the tested unit. |
| Delta UFC500 charging stations derive the default credentials of the Service account from character positions of the device serial number. An unauthenticated attacker with adjacent network access can reconstruct the resulting password, or exhaust the keyspace, and log in to read and change sensitive settings such as the OCPP backend. |
| CallBackery versions before 0.62.0 for Perl allow denial of service via the request path interpolated as a regular expression under CGI, FastCGI and PSGI.
The before_dispatch hook installed by startup() removes PATH_INFO from the end of the request URI with a substitution that interpolates PATH_INFO unquoted. Under CGI, FastCGI and PSGI both values come from the request, so the client chooses both the pattern and the string it is matched against.
A short unauthenticated request with a backreference in the path backtracks exponentially and can keep a worker process busy for minutes. |
| MuseBot before 2.0.0 contains an authentication bypass vulnerability that allows unauthenticated attackers to forge admin sessions by using the hard-coded default session_key 'muse_bot_session_key'. Attackers can sign a MuseBot-session cookie carrying a user_id to gain full administrative access, reading password hashes, chat records, and bot configuration, and stopping bots. |
| joi is a schema description language and data validator for JavaScript. From 17.1.1 until 17.13.9 and 18.3.1, the Joi.string().email({ multiple: true }) rule uses a separator regular expression whose leading whitespace quantifier is retried at every position in a long whitespace run that contains no separator, causing quadratic work during String.prototype.split. The behavior applies to the default separator and every custom separator. Applications that validate attacker-controlled values with the multiple option and no effective prior length limit can have the Node.js event loop blocked for seconds by one request, preventing other work. A .max() rule is not sufficient when abortEarly: false allows the email rule to run after the maximum-length check fails. This vulnerability is fixed in versions 17.13.9 and 18.3.1. |
| Highcharts JS is a JavaScript charting library based on SVG. From 1.0.0 until 4.2.2, Highcharts Dashboards edit mode walks editableOptions propertyPath segments without rejecting prototype-related keys. An attacker who controls editableOptions can provide a path through __proto__ or constructor, and a user's edit writes the configured value onto Object.prototype. The property then becomes visible to JavaScript throughout the page, with consequences determined by the consuming application. This issue is fixed in 4.2.2. |
| GraphQL Scalars is a library of custom GraphQL scalars for creating precise type-safe GraphQL schemas. From 1.24.1 until 2.0.1, GraphQLPhoneNumber in src/scalars/PhoneNumber.ts uses ambiguous nested digit quantifiers that backtrack exponentially when a PhoneNumber value contains a run of digits followed by a character that makes the match fail. GraphQL evaluates parseLiteral during document validation and parseValue during variable coercion before resolver authentication or authorization, so a small unauthenticated request can block the Node.js event loop and stall the server process. serialize is also affected when unvalidated stored values are returned through the scalar. This issue is fixed in version 2.0.1. |
| npm package `expr-eval` is vulnerable to Prototype Pollution. An attacker with access to express eval interface can use JavaScript prototype-based inheritance model to achieve arbitrary code execution. The npm expr-eval-fork package resolves this issue. |
