| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: clear skb2->cb[] in ip4ip6_err()
Oskar Kjos reported the following problem.
ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written
by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes
IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region
as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff
at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr
value. __ip_options_echo() then reads optlen from attacker-controlled
packet data at sptr[rr+1] and copies that many bytes into dopt->__data,
a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE).
To fix this we clear skb2->cb[], as suggested by Oskar Kjos.
Also add minimal IPv4 header validation (version == 4, ihl >= 5). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix potential UAF in set_cig_params_sync
hci_conn lookup and field access must be covered by hdev lock in
set_cig_params_sync, otherwise it's possible it is freed concurrently.
Take hdev lock to prevent hci_conn from being deleted or modified
concurrently. Just RCU lock is not suitable here, as we also want to
avoid "tearing" in the configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: restrict usage in unprivileged domU
The Xen privcmd driver allows to issue arbitrary hypercalls from
user space processes. This is normally no problem, as access is
usually limited to root and the hypervisor will deny any hypercalls
affecting other domains.
In case the guest is booted using secure boot, however, the privcmd
driver would be enabling a root user process to modify e.g. kernel
memory contents, thus breaking the secure boot feature.
The only known case where an unprivileged domU is really needing to
use the privcmd driver is the case when it is acting as the device
model for another guest. In this case all hypercalls issued via the
privcmd driver will target that other guest.
Fortunately the privcmd driver can already be locked down to allow
only hypercalls targeting a specific domain, but this mode can be
activated from user land only today.
The target domain can be obtained from Xenstore, so when not running
in dom0 restrict the privcmd driver to that target domain from the
beginning, resolving the potential problem of breaking secure boot.
This is XSA-482
---
V2:
- defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich)
- wait in open() if target domain isn't known yet
- issue message in case no target domain found (Jan Beulich) |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Address thermal zone removal races with resume
Since thermal_zone_pm_complete() and thermal_zone_device_resume()
re-initialize the poll_queue delayed work for the given thermal zone,
the cancel_delayed_work_sync() in thermal_zone_device_unregister()
may miss some already running work items and the thermal zone may
be freed prematurely [1].
There are two failing scenarios that both start with
running thermal_pm_notify_complete() right before invoking
thermal_zone_device_unregister() for one of the thermal zones.
In the first scenario, there is a work item already running for
the given thermal zone when thermal_pm_notify_complete() calls
thermal_zone_pm_complete() for that thermal zone and it continues to
run when thermal_zone_device_unregister() starts. Since the poll_queue
delayed work has been re-initialized by thermal_pm_notify_complete(), the
running work item will be missed by the cancel_delayed_work_sync() in
thermal_zone_device_unregister() and if it continues to run past the
freeing of the thermal zone object, a use-after-free will occur.
In the second scenario, thermal_zone_device_resume() queued up by
thermal_pm_notify_complete() runs right after the thermal_zone_exit()
called by thermal_zone_device_unregister() has returned. The poll_queue
delayed work is re-initialized by it before cancel_delayed_work_sync() is
called by thermal_zone_device_unregister(), so it may continue to run
after the freeing of the thermal zone object, which also leads to a
use-after-free.
Address the first failing scenario by ensuring that no thermal work
items will be running when thermal_pm_notify_complete() is called.
For this purpose, first move the cancel_delayed_work() call from
thermal_zone_pm_complete() to thermal_zone_pm_prepare() to prevent
new work from entering the workqueue going forward. Next, switch
over to using a dedicated workqueue for thermal events and update
the code in thermal_pm_notify() to flush that workqueue after
thermal_pm_notify_prepare() has returned which will take care of
all leftover thermal work already on the workqueue (that leftover
work would do nothing useful anyway because all of the thermal zones
have been flagged as suspended).
The second failing scenario is addressed by adding a tz->state check
to thermal_zone_device_resume() to prevent it from re-initializing
the poll_queue delayed work if the thermal zone is going away.
Note that the above changes will also facilitate relocating the suspend
and resume of thermal zones closer to the suspend and resume of devices,
respectively. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed
When retrieving the PDH cert, don't attempt to copy the blobs to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033
CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347
sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| Missing Authorization vulnerability in WPExperts Advanced File Manager file-manager-advanced allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Advanced File Manager: from n/a through 5.4.14. |
| NocoBase @nocobase/plugin-collection-sql through 2.2.28 contains an SQL injection vulnerability that allows privileged users to store unvalidated SQL by bypassing checkSQL() through the sqlCollection:setFields action. Attackers holding the collection-sql snippet can replace a benign collection query with dangerous statements executed on reload, reading pg_shadow password hashes or calling pg_read_file. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, The shovel management resource's is_authorized/2 delegates to rabbit_mgmt_util:is_authorized_monitor/2, which accepts the monitoring tag. But allowed_methods includes DELETE, and delete_resource/2 deletes / restarts shovel runtime parameters with no additional role check. A monitoring user , intended to have read-only visibility , can therefore delete or restart any shovel in any vhost they can see. A read-only monitoring user can delete or restart any dynamic shovel , a state-changing operation that the equivalent /api/parameters endpoint correctly restricts to policymaker. Preconditions include rabbitmq_shovel + rabbitmq_shovel_management plugins enabled Attacker has credentials with the monitoring tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. |
| Use after free in V8 in Google Chrome prior to 155.0.8059.84 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Seven Gitea API routes under `/api/v1/users/{username}` (followers, following, following/{target}, starred, subscriptions, keys and gpg_keys) were registered without the `individualPermsChecker` middleware that enforces the visibility of the target user. An authenticated user could therefore read the followers, following list, starred and watched repositories and public SSH and GPG keys of a user with limited or private visibility, whom they could not otherwise see. The issue was fixed in 1.27.3 and 28.0.0 and disclosed with 28.2.0. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy ID to userspace if PSP command failed
When retrieving the ID for the CPU, don't attempt to copy the ID blob to
userspace if the firmware command failed. If the failure was due to an
invalid length, i.e. the userspace buffer+length was too small, copying
the number of bytes _firmware_ requires will overflow the kernel-allocated
buffer and leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388
CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_get_id2+0x361/0x490 ../drivers/crypto/ccp/sev-dev.c:2222
sev_ioctl+0x25f/0x490 ../drivers/crypto/ccp/sev-dev.c:2575
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: flowlabel: defer exclusive option free until RCU teardown
`ip6fl_seq_show()` walks the global flowlabel hash under the seq-file
RCU read-side lock and prints `fl->opt->opt_nflen` when an option block
is present.
Exclusive flowlabels currently free `fl->opt` as soon as `fl->users`
drops to zero in `fl_release()`. However, the surrounding
`struct ip6_flowlabel` remains visible in the global hash table until
later garbage collection removes it and `fl_free_rcu()` finally tears it
down.
A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that
early `kfree()` and dereference freed option state, triggering a crash
in `ip6fl_seq_show()`.
Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches
the lifetime already required for the enclosing flowlabel while readers
can still reach it under RCU. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: separate dst_cache for input and output paths in seg6 lwtunnel
The seg6 lwtunnel uses a single dst_cache per encap route, shared
between seg6_input_core() and seg6_output_core(). These two paths
can perform the post-encap SID lookup in different routing contexts
(e.g., ip rules matching on the ingress interface, or VRF table
separation). Whichever path runs first populates the cache, and the
other reuses it blindly, bypassing its own lookup.
Fix this by splitting the cache into cache_input and cache_output,
so each path maintains its own cached dst independently. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: uinput - fix circular locking dependency with ff-core
A lockdep circular locking dependency warning can be triggered
reproducibly when using a force-feedback gamepad with uinput (for
example, playing ELDEN RING under Wine with a Flydigi Vader 5
controller):
ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex
The cycle is caused by four lock acquisition paths:
1. ff upload: input_ff_upload() holds ff->mutex and calls
uinput_dev_upload_effect() -> uinput_request_submit() ->
uinput_request_send(), which acquires udev->mutex.
2. device create: uinput_ioctl_handler() holds udev->mutex and calls
uinput_create_device() -> input_register_device(), which acquires
input_mutex.
3. device register: input_register_device() holds input_mutex and
calls kbd_connect() -> input_register_handle(), which acquires
dev->mutex.
4. evdev release: evdev_release() calls input_flush_device() under
dev->mutex, which calls input_ff_flush() acquiring ff->mutex.
Fix this by introducing a new state_lock spinlock to protect
udev->state and udev->dev access in uinput_request_send() instead of
acquiring udev->mutex. The function only needs to atomically check
device state and queue an input event into the ring buffer via
uinput_dev_event() -- both operations are safe under a spinlock
(ktime_get_ts64() and wake_up_interruptible() do not sleep). This
breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in
the lock ordering and cannot form cycles with mutexes.
To keep state transitions visible to uinput_request_send(), protect
writes to udev->state in uinput_create_device() and
uinput_destroy_device() with the same state_lock spinlock.
Additionally, move init_completion(&request->done) from
uinput_request_send() to uinput_request_submit() before
uinput_request_reserve_slot(). Once the slot is allocated,
uinput_flush_requests() may call complete() on it at any time from
the destroy path, so the completion must be initialised before the
request becomes visible.
Lock ordering after the fix:
ff->mutex -> state_lock (spinlock, leaf)
udev->mutex -> state_lock (spinlock, leaf)
udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge) |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: hold claim backbone gateways by reference
batadv_bla_add_claim() can replace claim->backbone_gw and drop the old
gateway's last reference while readers still follow the pointer.
The netlink claim dump path dereferences claim->backbone_gw->orig and
takes claim->backbone_gw->crc_lock without pinning the underlying
backbone gateway. batadv_bla_check_claim() still has the same naked
pointer access pattern.
Reuse batadv_bla_claim_get_backbone_gw() in both readers so they operate
on a stable gateway reference until the read-side work is complete.
This keeps the dump and claim-check paths aligned with the lifetime
rules introduced for the other BLA claim readers. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
Fix rxgk_do_verify_authenticator() to check the buffer size before checking
the nonce. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix possible deadlock between unlink and dio_end_io_write
ocfs2_unlink takes orphan dir inode_lock first and then ip_alloc_sem,
while in ocfs2_dio_end_io_write, it acquires these locks in reverse order.
This creates an ABBA lock ordering violation on lock classes
ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] and
ocfs2_file_ip_alloc_sem_key.
Lock Chain #0 (orphan dir inode_lock -> ip_alloc_sem):
ocfs2_unlink
ocfs2_prepare_orphan_dir
ocfs2_lookup_lock_orphan_dir
inode_lock(orphan_dir_inode) <- lock A
__ocfs2_prepare_orphan_dir
ocfs2_prepare_dir_for_insert
ocfs2_extend_dir
ocfs2_expand_inline_dir
down_write(&oi->ip_alloc_sem) <- Lock B
Lock Chain #1 (ip_alloc_sem -> orphan dir inode_lock):
ocfs2_dio_end_io_write
down_write(&oi->ip_alloc_sem) <- Lock B
ocfs2_del_inode_from_orphan()
inode_lock(orphan_dir_inode) <- Lock A
Deadlock Scenario:
CPU0 (unlink) CPU1 (dio_end_io_write)
------ ------
inode_lock(orphan_dir_inode)
down_write(ip_alloc_sem)
down_write(ip_alloc_sem)
inode_lock(orphan_dir_inode)
Since ip_alloc_sem is to protect allocation changes, which is unrelated
with operations in ocfs2_del_inode_from_orphan. So move
ocfs2_del_inode_from_orphan out of ip_alloc_sem to fix the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: smbdirect: introduce smbdirect_socket.recv_io.credits.available
The logic off managing recv credits by counting posted recv_io and
granted credits is racy.
That's because the peer might already consumed a credit,
but between receiving the incoming recv at the hardware
and processing the completion in the 'recv_done' functions
we likely have a window where we grant credits, which
don't really exist.
So we better have a decicated counter for the
available credits, which will be incremented
when we posted new recv buffers and drained when
we grant the credits to the peer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: always keep track of remap prev/next
During 3D workload, user is reporting hitting:
[ 413.361679] WARNING: drivers/gpu/drm/xe/xe_vm.c:1217 at vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe], CPU#7: vkd3d_queue/9925
[ 413.361944] CPU: 7 UID: 1000 PID: 9925 Comm: vkd3d_queue Kdump: loaded Not tainted 7.0.0-070000rc3-generic #202603090038 PREEMPT(lazy)
[ 413.361949] RIP: 0010:vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe]
[ 413.362074] RSP: 0018:ffffd4c25c3df930 EFLAGS: 00010282
[ 413.362077] RAX: 0000000000000000 RBX: ffff8f3ee817ed10 RCX: 0000000000000000
[ 413.362078] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 413.362079] RBP: ffffd4c25c3df980 R08: 0000000000000000 R09: 0000000000000000
[ 413.362081] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8f41fbf99380
[ 413.362082] R13: ffff8f3ee817e968 R14: 00000000ffffffef R15: ffff8f43d00bd380
[ 413.362083] FS: 00000001040ff6c0(0000) GS:ffff8f4696d89000(0000) knlGS:00000000330b0000
[ 413.362085] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
[ 413.362086] CR2: 00007ddfc4747000 CR3: 00000002e6262005 CR4: 0000000000f72ef0
[ 413.362088] PKRU: 55555554
[ 413.362089] Call Trace:
[ 413.362092] <TASK>
[ 413.362096] xe_vm_bind_ioctl+0xa9a/0xc60 [xe]
Which seems to hint that the vma we are re-inserting for the ops unwind
is either invalid or overlapping with something already inserted in the
vm. It shouldn't be invalid since this is a re-insertion, so must have
worked before. Leaving the likely culprit as something already placed
where we want to insert the vma.
Following from that, for the case where we do something like a rebind in
the middle of a vma, and one or both mapped ends are already compatible,
we skip doing the rebind of those vma and set next/prev to NULL. As well
as then adjust the original unmap va range, to avoid unmapping the ends.
However, if we trigger the unwind path, we end up with three va, with
the two ends never being removed and the original va range in the middle
still being the shrunken size.
If this occurs, one failure mode is when another unwind op needs to
interact with that range, which can happen with a vector of binds. For
example, if we need to re-insert something in place of the original va.
In this case the va is still the shrunken version, so when removing it
and then doing a re-insert it can overlap with the ends, which were
never removed, triggering a warning like above, plus leaving the vm in a
bad state.
With that, we need two things here:
1) Stop nuking the prev/next tracking for the skip cases. Instead
relying on checking for skip prev/next, where needed. That way on the
unwind path, we now correctly remove both ends.
2) Undo the unmap va shrinkage, on the unwind path. With the two ends
now removed the unmap va should expand back to the original size again,
before re-insertion.
v2:
- Update the explanation in the commit message, based on an actual IGT of
triggering this issue, rather than conjecture.
- Also undo the unmap shrinkage, for the skip case. With the two ends
now removed, the original unmap va range should expand back to the
original range.
v3:
- Track the old start/range separately. vma_size/start() uses the va
info directly.
(cherry picked from commit aec6969f75afbf4e01fd5fb5850ed3e9c27043ac) |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: avoid dereferencing log items after push callbacks
After xfsaild_push_item() calls iop_push(), the log item may have been
freed if the AIL lock was dropped during the push. Background inode
reclaim or the dquot shrinker can free the log item while the AIL lock
is not held, and the tracepoints in the switch statement dereference
the log item after iop_push() returns.
Fix this by capturing the log item type, flags, and LSN before calling
xfsaild_push_item(), and introducing a new xfs_ail_push_class trace
event class that takes these pre-captured values and the ailp pointer
instead of the log item pointer. |
