| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before assigning data->buffer = sequence->buffer. Each completed conversion then stores one 16-bit sample per enabled channel per sampling round through an unbounded *data->buffer++: in mcux_lpadc_isr() for interrupt-driven builds, and in mcux_lpadc_dma_callback() for DMA-driven builds on releases that have the DMA path. A sequence selecting two channels with a two-byte buffer, for example, has its second sample written past the end of the buffer.
On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to an LPADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can request far more samples than its buffer can hold: up to channels * 65536 samples into a two-byte buffer, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence.
The resulting stores are performed by the driver in kernel mode (in the ADC interrupt handler or the DMA completion callback), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer.
The fix calls the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c from mcux_lpadc_start_read(). The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started. |
| The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The ADI MAX32 driver did not honour that contract. start_read() in drivers/adc/adc_max32.c compared buffer_size, a byte count, against a sample count ((1 + extra_samplings) channels), ignoring sizeof(uint16_t), so it accepted a buffer half the required size. The samples are then stored through the uint16_t data->buffer by Wrap_MXC_ADC_GetData(), which writes two bytes per sample and advances the pointer by one uint16_t: in adc_max32_start_channel() for synchronous reads, and in adc_max32_isr() for asynchronous ones. A sequence selecting two channels with a two-byte buffer, for example, passes the check and has its second sample written past the end of the buffer.
On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to a MAX32 ADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can make the driver write twice as many bytes as its buffer holds. Because the check scales with extra_samplings, the overrun equals the length of the buffer itself, up to channels * 65536 bytes past its end, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence.
The resulting stores are performed by the driver in kernel mode (in the system call itself, the ADC context timer, or the ADC interrupt handler for asynchronous reads), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer.
The fix replaces that check in start_read() with a call to the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c, passing sizeof(uint16_t) as the sample size. The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started. |
| YesWiki before 4.7.0 contains a path traversal vulnerability in BazarListeAction that allows unauthenticated attackers to select arbitrary templates within the @bazar Twig namespace via the template GET parameter. Attackers can append crafted template values to pages containing the bazarliste action to force unintended layouts, causing page defacement for visitors following the crafted link. |
| Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.6, go-jose parses attacker-controlled RSA modulus and prime values from JWKs without enforcing size and consistency bounds before passing them to crypto/rsa.PrivateKey.Validate. On Go 1.24 and later, crafted large or degenerate RSA parameters can make that validation consume cubic CPU time, allowing remote denial of service in applications that parse JWKs from untrusted sources. This issue is fixed in version 4.1.6. |
| Seroval facilitates JavaScript value stringification, including complex structures beyond JSON.stringify capabilities. From 1.6.0 until 1.6.11, the JavaScript-output APIs derive a typed array's constructor name from a property on the value that can be replaced by an own constructor property. When application code copies untrusted properties onto a typed array and then passes it to serialize, serializeAsync, crossSerialize, crossSerializeAsync, crossSerializeStream, Serializer, or compileJSON, the attacker-controlled name is written as executable JavaScript and can run in the page receiving the output. This issue is fixed in version 1.6.11. |
| Autobahn Python is a WebSocket and WAMP implementation for Python that supports Twisted and asyncio. From 26.7.1 until 26.10.1, PerMessageBrotli.decompress_message_data in compress_brotli.py calls the Brotli decompressor without an output limit and checks maxMessagePayloadSize only after a complete frame has been inflated. An unauthenticated WebSocket client can send a small, highly compressed frame that allocates hundreds of MiB before rejection, causing memory-exhaustion denial of service on servers that enable the opt-in permessage-brotli feature through the compress extra. Deflate and bzip2 already enforce the remaining output budget and are outside this residual vulnerability. This issue is fixed in version 26.10.1. |
| A vulnerability was found in Argilla up to 2.8.0. This affects an unknown function of the file argilla-frontend/components/features/annotation/container/fields/text-field/TextField.vue. The manipulation of the argument text results in cross site scripting. The attack can be executed remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A security vulnerability has been detected in itsourcecode Online Book Store 1.0. This vulnerability affects unknown code of the file /book.php. The manipulation of the argument bookisbn leads to sql injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. |
| A vulnerability has been found in TOTOLINK A950RG 4.1.2cu.5268_B20221104. This affects the function setCloudUpgradeFW of the file lib/cste_modules/upgrade.so of the component Cloud Upgrade. The manipulation of the argument FileName leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. |
| Tornado is a Python web framework and asynchronous networking library. Prior to 6.6.0, Tornado decodes HTTP/1.1 chunked transfer encoding by processing body data that has already arrived without yielding to the event loop. A remote unauthenticated peer can send millions of one-byte chunks to monopolize the process event loop and stall every other connection served by that process, while lowering max_body_size only limits the duration of each request. For handlers that do not use @stream_request_body, retaining each chunk as a separate object can consume roughly twenty times the received body size, and SimpleAsyncHTTPClient has the same event-loop behavior when reading a response from a malicious server. This issue is fixed in version 6.6.0. |
| ieee802154_send() in subsys/net/l2/ieee802154/ieee802154.c copies the outgoing packet into a single fixed 125-byte transmit buffer (tx_frame_buf_pool, sized IEEE802154_MTU). In builds with CONFIG_NET_L2_IEEE802154_FRAGMENT enabled (the default whenever CONFIG_NET_6LO is set), the branch taken when 6LoWPAN fragmentation is not required performed an unchecked net_buf_add_mem(frame_buf, pkt_buf->data, pkt_buf->len). The only guard was __ASSERT_NO_MSG() inside net_buf_simple_add(), which is compiled out without CONFIG_ASSERT, so an oversized packet silently overran the frame buffer.
The defect is not reachable from the radio: for NET_AF_INET6 packets ieee802154_6lo_encode_pkt() compares the whole packet length against IEEE802154_MTU and takes the fragmentation path when it does not fit, so every buffer copied on the unfragmented branch is within bounds. It is reachable through NET_AF_PACKET sockets bound to an 802.15.4 interface: for NET_SOCK_RAW the 6LoWPAN block is skipped entirely and for NET_SOCK_DGRAM it returns early on the address-family test, leaving no length validation anywhere on the transmit path (net_context_sendto() and net_if_tx() apply none, and pkt_buffer_length() does not clamp the allocation for this L2).
An application — or, in a CONFIG_USERSPACE build, an unprivileged application thread using the zsock_socket()/zsock_sendto() syscalls — can therefore drive a supervisor-mode out-of-bounds write of chosen bytes past the 125-byte pool buffer. With the default CONFIG_NET_BUF_FIXED_DATA_SIZE of 128 bytes the overrun is bounded to roughly ll_hdr_len + 3 bytes; with CONFIG_NET_BUF_VARIABLE_DATA_SIZE a single storage buffer can be as large as CONFIG_NET_PKT_BUF_TX_DATA_POOL_SIZE, making the overrun far larger. The consequence is corruption of memory adjacent to the pool, with a crash or further compromise of kernel state as the practical impact.
The fix validates ll_hdr_len + net_pkt_get_len(pkt) + authtag_len against IEEE802154_MTU before any copy and adds a tailroom-checking copy_pkt_to_frame() helper that returns -EMSGSIZE instead of overrunning the buffer. The same change also linearizes the whole net_buf chain into one MAC frame, so packet storage boundaries no longer become frame boundaries on the wire. |
| Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. Prior to 4.1.5, parsing attacker-controlled JSON through go-jose allows deeply nested arrays or objects to exceed Go's stack limit. The resulting stack overflow crashes the application and permits denial of service in applications that parse untrusted JSON through go-jose. This issue is fixed in version 4.1.5. |
| Asterisk is an open source private branch exchange and telephony toolkit. Prior to Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3, an unauthenticated attacker may use reflected cross-site scripting in `phone provisioning HTTP error pages` to retrieve an authorized user's `AMI session cookie` and impersonate that user when `res_phoneprov` is enabled. The Asterisk HTTP web server, Asterisk Manager Interface (AMI), and AMI access via HTTP must all be enabled; each is disabled by default. The attacker must be able to connect to the HTTP server, which binds only to `127.0.0.1` by default even when enabled, and must convince the authorized user to click a malicious link. This issue is fixed in Asterisk 20.20.1, 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 20.7-cert11, 22.8-cert3. |
| SemanticMediaWiki from 3.1.0 before 7.3.1 contains a reflected cross-site scripting vulnerability that allows unauthenticated attackers to inject scripts through the unescaped default parameter in JsonResultPrinter. Attackers can lure victims to a crafted Special:Ask link with a zero-result query and request_type=special_page, executing JavaScript in the wiki origin to steal sessions or CSRF tokens. |
| Semantic MediaWiki from 2.5.0 before 7.3.1 contains a stored cross-site scripting vulnerability that allows users with page-edit rights to inject scripts via External identifier property values. Attackers can annotate markup payloads that ExternalIdentifierValue renders unescaped on Special:Browse, executing JavaScript in viewers' sessions, including administrators. |
| Semantic MediaWiki from 4.2.0 before 7.3.1 contains a stored cross-site scripting vulnerability that allows authenticated profile or schema editors to inject HTML through FacetedSearch exploration-link labels. Attackers can store markup in the label, which ExploreListBuilder::buildHTML() passes unescaped to Html::rawElement(), altering the Special:FacetedSearch page and potentially running scripts in viewers' browsers. |
| REDAXO from 5.18.0 before 5.21.4 contains a stored cross-site scripting vulnerability because rex_media_service moves uploaded SVG files into the public media folder before sanitizing them. Authenticated users with mediapool upload rights can race the sanitizer or exhaust memory limits to leave script-laden SVGs publicly served, executing scripts in victims' backend sessions. |
| Pillow is a Python imaging library. From 9.2.0 until 13.0.0, Pillow performs quadratic copying when saving a GIF with a long comment. _get_global_header() repeatedly copies portions of comment data while assembling the global header, including comments retained from an untrusted input image. An attacker can supply an image with a large GIF comment to an application that saves it as GIF. This can consume excessive CPU and delay or deny service. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow takes quadratic time to reserve PDF object identifiers when saving many frames with save_all enabled. PdfParser.next_object_id() repeatedly rebuilds and scans all previously reserved identifiers for every object. An attacker can supply a multi-frame image, including a small APNG with a large declared frame count, to an application that converts it to a multipage PDF. This can consume excessive CPU and deny service. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 2.6.0 until 13.0.0, Pillow is vulnerable to argument injection when invoking Ghostscript for EPS input. EpsImagePlugin.Ghostscript passes a caller-controlled input filename after -f without converting it to a safe absolute path, so a name beginning with a hyphen can be interpreted as a Ghostscript option. An attacker who controls the filename can inject Ghostscript arguments. Arbitrary command execution specifically requires a leading @ argument-file filename and control of the referenced text file containing additional Ghostscript arguments; the reported chain reproduces with the default -dSAFER invocation. This issue is fixed in version 13.0.0. |
