| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: max20086: fix invalid memory access
max20086_parse_regulators_dt() calls of_regulator_match() using an
array of struct of_regulator_match allocated on the stack for the
matches argument.
of_regulator_match() calls devm_of_regulator_put_matches(), which calls
devres_alloc() to allocate a struct devm_of_regulator_matches which will
be de-allocated using devm_of_regulator_put_matches().
struct devm_of_regulator_matches is populated with the stack allocated
matches array.
If the device fails to probe, devm_of_regulator_put_matches() will be
called and will try to call of_node_put() on that stack pointer,
generating the following dmesg entries:
max20086 6-0028: Failed to read DEVICE_ID reg: -121
kobject: '\xc0$\xa5\x03' (000000002cebcb7a): is not initialized, yet
kobject_put() is being called.
Followed by a stack trace matching the call flow described above.
Switch to allocating the matches array using devm_kcalloc() to
avoid accessing the stack pointer long after it's out of scope.
This also has the advantage of allowing multiple max20086 to probe
without overriding the data stored inside the global of_regulator_match. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Avoid using sk_socket after free when sending
The sk->sk_socket is not locked or referenced in backlog thread, and
during the call to skb_send_sock(), there is a race condition with
the release of sk_socket. All types of sockets(tcp/udp/unix/vsock)
will be affected.
Race conditions:
'''
CPU0 CPU1
backlog::skb_send_sock
sendmsg_unlocked
sock_sendmsg
sock_sendmsg_nosec
close(fd):
...
ops->release() -> sock_map_close()
sk_socket->ops = NULL
free(socket)
sock->ops->sendmsg
^
panic here
'''
The ref of psock become 0 after sock_map_close() executed.
'''
void sock_map_close()
{
...
if (likely(psock)) {
...
// !! here we remove psock and the ref of psock become 0
sock_map_remove_links(sk, psock)
psock = sk_psock_get(sk);
if (unlikely(!psock))
goto no_psock; <=== Control jumps here via goto
...
cancel_delayed_work_sync(&psock->work); <=== not executed
sk_psock_put(sk, psock);
...
}
'''
Based on the fact that we already wait for the workqueue to finish in
sock_map_close() if psock is held, we simply increase the psock
reference count to avoid race conditions.
With this patch, if the backlog thread is running, sock_map_close() will
wait for the backlog thread to complete and cancel all pending work.
If no backlog running, any pending work that hasn't started by then will
fail when invoked by sk_psock_get(), as the psock reference count have
been zeroed, and sk_psock_drop() will cancel all jobs via
cancel_delayed_work_sync().
In summary, we require synchronization to coordinate the backlog thread
and close() thread.
The panic I catched:
'''
Workqueue: events sk_psock_backlog
RIP: 0010:sock_sendmsg+0x21d/0x440
RAX: 0000000000000000 RBX: ffffc9000521fad8 RCX: 0000000000000001
...
Call Trace:
<TASK>
? die_addr+0x40/0xa0
? exc_general_protection+0x14c/0x230
? asm_exc_general_protection+0x26/0x30
? sock_sendmsg+0x21d/0x440
? sock_sendmsg+0x3e0/0x440
? __pfx_sock_sendmsg+0x10/0x10
__skb_send_sock+0x543/0xb70
sk_psock_backlog+0x247/0xb80
...
''' |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: aqc111: fix error handling of usbnet read calls
Syzkaller, courtesy of syzbot, identified an error (see report [1]) in
aqc111 driver, caused by incomplete sanitation of usb read calls'
results. This problem is quite similar to the one fixed in commit
920a9fa27e78 ("net: asix: add proper error handling of usb read errors").
For instance, usbnet_read_cmd() may read fewer than 'size' bytes,
even if the caller expected the full amount, and aqc111_read_cmd()
will not check its result properly. As [1] shows, this may lead
to MAC address in aqc111_bind() being only partly initialized,
triggering KMSAN warnings.
Fix the issue by verifying that the number of bytes read is
as expected and not less.
[1] Partial syzbot report:
BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:208 [inline]
BUG: KMSAN: uninit-value in usbnet_probe+0x2e57/0x4390 drivers/net/usb/usbnet.c:1830
is_valid_ether_addr include/linux/etherdevice.h:208 [inline]
usbnet_probe+0x2e57/0x4390 drivers/net/usb/usbnet.c:1830
usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396
call_driver_probe drivers/base/dd.c:-1 [inline]
really_probe+0x4d1/0xd90 drivers/base/dd.c:658
__driver_probe_device+0x268/0x380 drivers/base/dd.c:800
...
Uninit was stored to memory at:
dev_addr_mod+0xb0/0x550 net/core/dev_addr_lists.c:582
__dev_addr_set include/linux/netdevice.h:4874 [inline]
eth_hw_addr_set include/linux/etherdevice.h:325 [inline]
aqc111_bind+0x35f/0x1150 drivers/net/usb/aqc111.c:717
usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772
usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396
...
Uninit was stored to memory at:
ether_addr_copy include/linux/etherdevice.h:305 [inline]
aqc111_read_perm_mac drivers/net/usb/aqc111.c:663 [inline]
aqc111_bind+0x794/0x1150 drivers/net/usb/aqc111.c:713
usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772
usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396
call_driver_probe drivers/base/dd.c:-1 [inline]
...
Local variable buf.i created at:
aqc111_read_perm_mac drivers/net/usb/aqc111.c:656 [inline]
aqc111_bind+0x221/0x1150 drivers/net/usb/aqc111.c:713
usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work
The cited commit fixed a crash when cma_netevent_callback was called for
a cma_id while work on that id from a previous call had not yet started.
The work item was re-initialized in the second call, which corrupted the
work item currently in the work queue.
However, it left a problem when queue_work fails (because the item is
still pending in the work queue from a previous call). In this case,
cma_id_put (which is called in the work handler) is therefore not
called. This results in a userspace process hang (zombie process).
Fix this by calling cma_id_put() if queue_work fails. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: bcm: rpi: Add NULL check in raspberrypi_clk_register()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
raspberrypi_clk_register() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
hisi_acc_vfio_pci: fix XQE dma address error
The dma addresses of EQE and AEQE are wrong after migration and
results in guest kernel-mode encryption services failure.
Comparing the definition of hardware registers, we found that
there was an error when the data read from the register was
combined into an address. Therefore, the address combination
sequence needs to be corrected.
Even after fixing the above problem, we still have an issue
where the Guest from an old kernel can get migrated to
new kernel and may result in wrong data.
In order to ensure that the address is correct after migration,
if an old magic number is detected, the dma address needs to be
updated. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: prevent kernel warning due to negative i_nlink from corrupted image
WARNING: CPU: 1 PID: 9426 at fs/inode.c:417 drop_nlink+0xac/0xd0
home/cc/linux/fs/inode.c:417
Modules linked in:
CPU: 1 UID: 0 PID: 9426 Comm: syz-executor568 Not tainted
6.14.0-12627-g94d471a4f428 #2 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:drop_nlink+0xac/0xd0 home/cc/linux/fs/inode.c:417
Code: 48 8b 5d 28 be 08 00 00 00 48 8d bb 70 07 00 00 e8 f9 67 e6 ff
f0 48 ff 83 70 07 00 00 5b 5d e9 9a 12 82 ff e8 95 12 82 ff 90
<0f> 0b 90 c7 45 48 ff ff ff ff 5b 5d e9 83 12 82 ff e8 fe 5f e6
ff
RSP: 0018:ffffc900026b7c28 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8239710f
RDX: ffff888041345a00 RSI: ffffffff8239717b RDI: 0000000000000005
RBP: ffff888054509ad0 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: ffffffff9ab36f08 R12: ffff88804bb40000
R13: ffff8880545091e0 R14: 0000000000008000 R15: ffff8880545091e0
FS: 000055555d0c5880(0000) GS:ffff8880eb3e3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f915c55b178 CR3: 0000000050d20000 CR4: 0000000000352ef0
Call Trace:
<task>
f2fs_i_links_write home/cc/linux/fs/f2fs/f2fs.h:3194 [inline]
f2fs_drop_nlink+0xd1/0x3c0 home/cc/linux/fs/f2fs/dir.c:845
f2fs_delete_entry+0x542/0x1450 home/cc/linux/fs/f2fs/dir.c:909
f2fs_unlink+0x45c/0x890 home/cc/linux/fs/f2fs/namei.c:581
vfs_unlink+0x2fb/0x9b0 home/cc/linux/fs/namei.c:4544
do_unlinkat+0x4c5/0x6a0 home/cc/linux/fs/namei.c:4608
__do_sys_unlink home/cc/linux/fs/namei.c:4654 [inline]
__se_sys_unlink home/cc/linux/fs/namei.c:4652 [inline]
__x64_sys_unlink+0xc5/0x110 home/cc/linux/fs/namei.c:4652
do_syscall_x64 home/cc/linux/arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xc7/0x250 home/cc/linux/arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb3d092324b
Code: 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 83 c8 ff c3 66
2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 57 00 00 00 0f 05
<48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01
48
RSP: 002b:00007ffdc232d938 EFLAGS: 00000206 ORIG_RAX: 0000000000000057
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fb3d092324b
RDX: 00007ffdc232d960 RSI: 00007ffdc232d960 RDI: 00007ffdc232d9f0
RBP: 00007ffdc232d9f0 R08: 0000000000000001 R09: 00007ffdc232d7c0
R10: 00000000fffffffd R11: 0000000000000206 R12: 00007ffdc232eaf0
R13: 000055555d0cebb0 R14: 00007ffdc232d958 R15: 0000000000000001
</task> |
| In the Linux kernel, the following vulnerability has been resolved:
media: imx-jpeg: Cleanup after an allocation error
When allocation failures are not cleaned up by the driver, further
allocation errors will be false-positives, which will cause buffers to
remain uninitialized and cause NULL pointer dereferences.
Ensure proper cleanup of failed allocations to prevent these issues. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vivid: Change the siize of the composing
syzkaller found a bug:
BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline]
BUG: KASAN: vmalloc-out-of-bounds in tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705
Write of size 1440 at addr ffffc9000d0ffda0 by task vivid-000-vid-c/5304
CPU: 0 UID: 0 PID: 5304 Comm: vivid-000-vid-c Not tainted 6.14.0-rc2-syzkaller-00039-g09fbf3d50205 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x169/0x550 mm/kasan/report.c:489
kasan_report+0x143/0x180 mm/kasan/report.c:602
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
tpg_fill_plane_pattern drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2608 [inline]
tpg_fill_plane_buffer+0x1a9c/0x5af0 drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:2705
vivid_fillbuff drivers/media/test-drivers/vivid/vivid-kthread-cap.c:470 [inline]
vivid_thread_vid_cap_tick+0xf8e/0x60d0 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:629
vivid_thread_vid_cap+0x8aa/0xf30 drivers/media/test-drivers/vivid/vivid-kthread-cap.c:767
kthread+0x7a9/0x920 kernel/kthread.c:464
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
The composition size cannot be larger than the size of fmt_cap_rect.
So execute v4l2_rect_map_inside() even if has_compose_cap == 0. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vidtv: Terminating the subsequent process of initialization failure
syzbot reported a slab-use-after-free Read in vidtv_mux_init. [1]
After PSI initialization fails, the si member is accessed again, resulting
in this uaf.
After si initialization fails, the subsequent process needs to be exited.
[1]
BUG: KASAN: slab-use-after-free in vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78 [inline]
BUG: KASAN: slab-use-after-free in vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524
Read of size 8 at addr ffff88802fa42acc by task syz.2.37/6059
CPU: 0 UID: 0 PID: 6059 Comm: syz.2.37 Not tainted 6.14.0-rc5-syzkaller #0
Hardware name: Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xd9/0x110 mm/kasan/report.c:634
vidtv_mux_pid_ctx_init drivers/media/test-drivers/vidtv/vidtv_mux.c:78
vidtv_mux_init+0xac2/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:524
vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194
vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239
dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973
dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline]
dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537
dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564
dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline]
dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246
__fput+0x3ff/0xb70 fs/file_table.c:464
task_work_run+0x14e/0x250 kernel/task_work.c:227
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0xad8/0x2d70 kernel/exit.c:938
do_group_exit+0xd3/0x2a0 kernel/exit.c:1087
__do_sys_exit_group kernel/exit.c:1098 [inline]
__se_sys_exit_group kernel/exit.c:1096 [inline]
__x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1096
x64_sys_call+0x151f/0x1720 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f871d58d169
Code: Unable to access opcode bytes at 0x7f871d58d13f.
RSP: 002b:00007fff4b19a788 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f871d58d169
RDX: 0000000000000064 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 00007fff4b19a7ec R08: 0000000b4b19a87f R09: 00000000000927c0
R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000003
R13: 00000000000927c0 R14: 000000000001d553 R15: 00007fff4b19a840
</TASK>
Allocated by task 6059:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394
kmalloc_noprof include/linux/slab.h:901 [inline]
kzalloc_noprof include/linux/slab.h:1037 [inline]
vidtv_psi_pat_table_init drivers/media/test-drivers/vidtv/vidtv_psi.c:970
vidtv_channel_si_init drivers/media/test-drivers/vidtv/vidtv_channel.c:423
vidtv_mux_init drivers/media/test-drivers/vidtv/vidtv_mux.c:519
vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194
vidtv_start_feed drivers/media/test-drivers/vidtv/vidtv_bridge.c:239
dmx_section_feed_start_filtering drivers/media/dvb-core/dvb_demux.c:973
dvb_dmxdev_feed_start drivers/media/dvb-core/dmxdev.c:508 [inline]
dvb_dmxdev_feed_restart.isra.0 drivers/media/dvb-core/dmxdev.c:537
dvb_dmxdev_filter_stop+0x2b4/0x3a0 drivers/media/dvb-core/dmxdev.c:564
dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline]
dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246
__fput+0x3ff/0xb70 fs/file_tabl
---truncated--- |
| There is a stack overflow vulnerability in ash.c:6030 in busybox before 1.35. In the environment of Internet of Vehicles, this vulnerability can be executed from command to arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on sbi->total_valid_block_count
syzbot reported a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/f2fs.h:2521!
RIP: 0010:dec_valid_block_count+0x3b2/0x3c0 fs/f2fs/f2fs.h:2521
Call Trace:
f2fs_truncate_data_blocks_range+0xc8c/0x11a0 fs/f2fs/file.c:695
truncate_dnode+0x417/0x740 fs/f2fs/node.c:973
truncate_nodes+0x3ec/0xf50 fs/f2fs/node.c:1014
f2fs_truncate_inode_blocks+0x8e3/0x1370 fs/f2fs/node.c:1197
f2fs_do_truncate_blocks+0x840/0x12b0 fs/f2fs/file.c:810
f2fs_truncate_blocks+0x10d/0x300 fs/f2fs/file.c:838
f2fs_truncate+0x417/0x720 fs/f2fs/file.c:888
f2fs_setattr+0xc4f/0x12f0 fs/f2fs/file.c:1112
notify_change+0xbca/0xe90 fs/attr.c:552
do_truncate+0x222/0x310 fs/open.c:65
handle_truncate fs/namei.c:3466 [inline]
do_open fs/namei.c:3849 [inline]
path_openat+0x2e4f/0x35d0 fs/namei.c:4004
do_filp_open+0x284/0x4e0 fs/namei.c:4031
do_sys_openat2+0x12b/0x1d0 fs/open.c:1429
do_sys_open fs/open.c:1444 [inline]
__do_sys_creat fs/open.c:1522 [inline]
__se_sys_creat fs/open.c:1516 [inline]
__x64_sys_creat+0x124/0x170 fs/open.c:1516
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/syscall_64.c:94
The reason is: in fuzzed image, sbi->total_valid_block_count is
inconsistent w/ mapped blocks indexed by inode, so, we should
not trigger panic for such case, instead, let's print log and
set fsck flag. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: wcd9335: Fix missing free of regulator supplies
Driver gets and enables all regulator supplies in probe path
(wcd9335_parse_dt() and wcd9335_power_on_reset()), but does not cleanup
in final error paths and in unbind (missing remove() callback). This
leads to leaked memory and unbalanced regulator enable count during
probe errors or unbind.
Fix this by converting entire code into devm_regulator_bulk_get_enable()
which also greatly simplifies the code. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle csum tree error with rescue=ibadroots correctly
[BUG]
There is syzbot based reproducer that can crash the kernel, with the
following call trace: (With some debug output added)
DEBUG: rescue=ibadroots parsed
BTRFS: device fsid 14d642db-7b15-43e4-81e6-4b8fac6a25f8 devid 1 transid 8 /dev/loop0 (7:0) scanned by repro (1010)
BTRFS info (device loop0): first mount of filesystem 14d642db-7b15-43e4-81e6-4b8fac6a25f8
BTRFS info (device loop0): using blake2b (blake2b-256-generic) checksum algorithm
BTRFS info (device loop0): using free-space-tree
BTRFS warning (device loop0): checksum verify failed on logical 5312512 mirror 1 wanted 0xb043382657aede36608fd3386d6b001692ff406164733d94e2d9a180412c6003 found 0x810ceb2bacb7f0f9eb2bf3b2b15c02af867cb35ad450898169f3b1f0bd818651 level 0
DEBUG: read tree root path failed for tree csum, ret=-5
BTRFS warning (device loop0): checksum verify failed on logical 5328896 mirror 1 wanted 0x51be4e8b303da58e6340226815b70e3a93592dac3f30dd510c7517454de8567a found 0x51be4e8b303da58e634022a315b70e3a93592dac3f30dd510c7517454de8567a level 0
BTRFS warning (device loop0): checksum verify failed on logical 5292032 mirror 1 wanted 0x1924ccd683be9efc2fa98582ef58760e3848e9043db8649ee382681e220cdee4 found 0x0cb6184f6e8799d9f8cb335dccd1d1832da1071d12290dab3b85b587ecacca6e level 0
process 'repro' launched './file2' with NULL argv: empty string added
DEBUG: no csum root, idatacsums=0 ibadroots=134217728
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f]
CPU: 5 UID: 0 PID: 1010 Comm: repro Tainted: G OE 6.15.0-custom+ #249 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csum+0x93/0x3d0 [btrfs]
Call Trace:
<TASK>
btrfs_lookup_bio_sums+0x47a/0xdf0 [btrfs]
btrfs_submit_bbio+0x43e/0x1a80 [btrfs]
submit_one_bio+0xde/0x160 [btrfs]
btrfs_readahead+0x498/0x6a0 [btrfs]
read_pages+0x1c3/0xb20
page_cache_ra_order+0x4b5/0xc20
filemap_get_pages+0x2d3/0x19e0
filemap_read+0x314/0xde0
__kernel_read+0x35b/0x900
bprm_execve+0x62e/0x1140
do_execveat_common.isra.0+0x3fc/0x520
__x64_sys_execveat+0xdc/0x130
do_syscall_64+0x54/0x1d0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
---[ end trace 0000000000000000 ]---
[CAUSE]
Firstly the fs has a corrupted csum tree root, thus to mount the fs we
have to go "ro,rescue=ibadroots" mount option.
Normally with that mount option, a bad csum tree root should set
BTRFS_FS_STATE_NO_DATA_CSUMS flag, so that any future data read will
ignore csum search.
But in this particular case, we have the following call trace that
caused NULL csum root, but not setting BTRFS_FS_STATE_NO_DATA_CSUMS:
load_global_roots_objectid():
ret = btrfs_search_slot();
/* Succeeded */
btrfs_item_key_to_cpu()
found = true;
/* We found the root item for csum tree. */
root = read_tree_root_path();
if (IS_ERR(root)) {
if (!btrfs_test_opt(fs_info, IGNOREBADROOTS))
/*
* Since we have rescue=ibadroots mount option,
* @ret is still 0.
*/
break;
if (!found || ret) {
/* @found is true, @ret is 0, error handling for csum
* tree is skipped.
*/
}
This means we completely skipped to set BTRFS_FS_STATE_NO_DATA_CSUMS if
the csum tree is corrupted, which results unexpected later csum lookup.
[FIX]
If read_tree_root_path() failed, always populate @ret to the error
number.
As at the end of the function, we need @ret to determine if we need to
do the extra error handling for csum tree. |
| In the Linux kernel, the following vulnerability has been resolved:
bcache: fix NULL pointer in cache_set_flush()
1. LINE#1794 - LINE#1887 is some codes about function of
bch_cache_set_alloc().
2. LINE#2078 - LINE#2142 is some codes about function of
register_cache_set().
3. register_cache_set() will call bch_cache_set_alloc() in LINE#2098.
1794 struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
1795 {
...
1860 if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) ||
1861 mempool_init_slab_pool(&c->search, 32, bch_search_cache) ||
1862 mempool_init_kmalloc_pool(&c->bio_meta, 2,
1863 sizeof(struct bbio) + sizeof(struct bio_vec) *
1864 bucket_pages(c)) ||
1865 mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) ||
1866 bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio),
1867 BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) ||
1868 !(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) ||
1869 !(c->moving_gc_wq = alloc_workqueue("bcache_gc",
1870 WQ_MEM_RECLAIM, 0)) ||
1871 bch_journal_alloc(c) ||
1872 bch_btree_cache_alloc(c) ||
1873 bch_open_buckets_alloc(c) ||
1874 bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages)))
1875 goto err;
^^^^^^^^
1876
...
1883 return c;
1884 err:
1885 bch_cache_set_unregister(c);
^^^^^^^^^^^^^^^^^^^^^^^^^^^
1886 return NULL;
1887 }
...
2078 static const char *register_cache_set(struct cache *ca)
2079 {
...
2098 c = bch_cache_set_alloc(&ca->sb);
2099 if (!c)
2100 return err;
^^^^^^^^^^
...
2128 ca->set = c;
2129 ca->set->cache[ca->sb.nr_this_dev] = ca;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...
2138 return NULL;
2139 err:
2140 bch_cache_set_unregister(c);
2141 return err;
2142 }
(1) If LINE#1860 - LINE#1874 is true, then do 'goto err'(LINE#1875) and
call bch_cache_set_unregister()(LINE#1885).
(2) As (1) return NULL(LINE#1886), LINE#2098 - LINE#2100 would return.
(3) As (2) has returned, LINE#2128 - LINE#2129 would do *not* give the
value to c->cache[], it means that c->cache[] is NULL.
LINE#1624 - LINE#1665 is some codes about function of cache_set_flush().
As (1), in LINE#1885 call
bch_cache_set_unregister()
---> bch_cache_set_stop()
---> closure_queue()
-.-> cache_set_flush() (as below LINE#1624)
1624 static void cache_set_flush(struct closure *cl)
1625 {
...
1654 for_each_cache(ca, c, i)
1655 if (ca->alloc_thread)
^^
1656 kthread_stop(ca->alloc_thread);
...
1665 }
(4) In LINE#1655 ca is NULL(see (3)) in cache_set_flush() then the
kernel crash occurred as below:
[ 846.712887] bcache: register_cache() error drbd6: cannot allocate memory
[ 846.713242] bcache: register_bcache() error : failed to register device
[ 846.713336] bcache: cache_set_free() Cache set 2f84bdc1-498a-4f2f-98a7-01946bf54287 unregistered
[ 846.713768] BUG: unable to handle kernel NULL pointer dereference at 00000000000009f8
[ 846.714790] PGD 0 P4D 0
[ 846.715129] Oops: 0000 [#1] SMP PTI
[ 846.715472] CPU: 19 PID: 5057 Comm: kworker/19:16 Kdump: loaded Tainted: G OE --------- - - 4.18.0-147.5.1.el8_1.5es.3.x86_64 #1
[ 846.716082] Hardware name: ESPAN GI-25212/X11DPL-i, BIOS 2.1 06/15/2018
[ 846.716451] Workqueue: events cache_set_flush [bcache]
[ 846.716808] RIP: 0010:cache_set_flush+0xc9/0x1b0 [bcache]
[ 846.717155] Code: 00 4c 89 a5 b0 03 00 00 48 8b 85 68 f6 ff ff a8 08 0f 84 88 00 00 00 31 db 66 83 bd 3c f7 ff ff 00 48 8b 85 48 ff ff ff 74 28 <48> 8b b8 f8 09 00 0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
atm: atmtcp: Free invalid length skb in atmtcp_c_send().
syzbot reported the splat below. [0]
vcc_sendmsg() copies data passed from userspace to skb and passes
it to vcc->dev->ops->send().
atmtcp_c_send() accesses skb->data as struct atmtcp_hdr after
checking if skb->len is 0, but it's not enough.
Also, when skb->len == 0, skb and sk (vcc) were leaked because
dev_kfree_skb() is not called and sk_wmem_alloc adjustment is missing
to revert atm_account_tx() in vcc_sendmsg(), which is expected
to be done in atm_pop_raw().
Let's properly free skb with an invalid length in atmtcp_c_send().
[0]:
BUG: KMSAN: uninit-value in atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294
atmtcp_c_send+0x255/0xed0 drivers/atm/atmtcp.c:294
vcc_sendmsg+0xd7c/0xff0 net/atm/common.c:644
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:727
____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566
___sys_sendmsg+0x271/0x3b0 net/socket.c:2620
__sys_sendmsg net/socket.c:2652 [inline]
__do_sys_sendmsg net/socket.c:2657 [inline]
__se_sys_sendmsg net/socket.c:2655 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655
x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4154 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
kmem_cache_alloc_node_noprof+0x818/0xf00 mm/slub.c:4249
kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:579
__alloc_skb+0x347/0x7d0 net/core/skbuff.c:670
alloc_skb include/linux/skbuff.h:1336 [inline]
vcc_sendmsg+0xb40/0xff0 net/atm/common.c:628
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:727
____sys_sendmsg+0x7e0/0xd80 net/socket.c:2566
___sys_sendmsg+0x271/0x3b0 net/socket.c:2620
__sys_sendmsg net/socket.c:2652 [inline]
__do_sys_sendmsg net/socket.c:2657 [inline]
__se_sys_sendmsg net/socket.c:2655 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2655
x64_sys_call+0x32fb/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 1 UID: 0 PID: 5798 Comm: syz-executor192 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(undef)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug
The qmp_usb_iomap() helper function currently returns the raw result of
devm_ioremap() for non-exclusive mappings. Since devm_ioremap() may return
a NULL pointer and the caller only checks error pointers with IS_ERR(),
NULL could bypass the check and lead to an invalid dereference.
Fix the issue by checking if devm_ioremap() returns NULL. When it does,
qmp_usb_iomap() now returns an error pointer via IOMEM_ERR_PTR(-ENOMEM),
ensuring safe and consistent error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: nand: ecc-mxic: Fix use of uninitialized variable ret
If ctx->steps is zero, the loop processing ECC steps is skipped,
and the variable ret remains uninitialized. It is later checked
and returned, which leads to undefined behavior and may cause
unpredictable results in user space or kernel crashes.
This scenario can be triggered in edge cases such as misconfigured
geometry, ECC engine misuse, or if ctx->steps is not validated
after initialization.
Initialize ret to zero before the loop to ensure correct and safe
behavior regardless of the ctx->steps value.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get()
Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value
is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8).
This seems correct and aligns with the PTP interrupt status register
(PTP_INT_STS) specifications.
However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with
only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index:
lan743x_ptp_io_event_clock_get(..., u8 channel,...)
{
...
/* Update Local timestamp */
extts = &ptp->extts[channel];
extts->ts.tv_sec = sec;
...
}
To avoid an out-of-bounds write and utilize all the supported GPIO
inputs, set LAN743X_PTP_N_EXTTS to 8.
Detected using the static analysis tool - Svace. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: at91: Fix possible out-of-boundary access
at91_gpio_probe() doesn't check that given OF alias is not available or
something went wrong when trying to get it. This might have consequences
when accessing gpio_chips array with that value as an index. Note, that
BUG() can be compiled out and hence won't actually perform the required
checks. |
