| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate. In handle_transport_data(), when the 32-bit receiver index of an incoming transport-data message matched no session, the code both scheduled a new handshake and copied the datagram's source address into peer->endpoint with memcpy(&peer->endpoint, peer_addr, sizeof(peer->endpoint)). Because the receiver index is unknown, there is no key with which such a message could be verified, so the address written into peer->endpoint is entirely attacker-supplied. Every other endpoint update in the implementation happens only after authentication — after the Noise handshake in handle_handshake_init(), or after AEAD decryption plus the anti-replay check in wg_process_data_message().
The WireGuard listener is registered with net_udp_register() using no remote address or port filter and defaults to UDP port 51820 (CONFIG_WIREGUARD_PORT), and wg_ctrl_recv() resolves the peer by interface rather than by any cryptographic identity. Any host able to send a UDP datagram to that port can therefore reach the defect off-path, with no need to observe legitimate traffic: a 16-byte datagram carrying the transport-data type, zeroed reserved bytes and an arbitrary receiver index is sufficient. The vulnerable branch runs whenever the peer has neither a valid handshake nor a current keypair — the state at boot and after a session expires.
A single spoofed datagram redirects peer->endpoint to an address of the attacker's choosing, and all subsequent handshake initiations, keepalives and encrypted data packets are sent there. The legitimate peer never receives the initiations and so never re-authenticates, and nothing resets the endpoint afterwards, leaving the tunnel persistently unusable on devices whose peer does not initiate handshakes itself. The attacker can also relay the redirected initiations to the real peer to place itself in the path of the tunnel, observing ciphertext and traffic metadata and selectively dropping packets. WireGuard's end-to-end cryptography still prevents decryption or forgery of tunnel content, so the impact is loss of availability plus limited confidentiality, not key compromise.
The fix removes the endpoint learning from this path entirely: the stale-session recovery is kept, but the handshake is sent only to an endpoint learnt from an authenticated message, falling back to the configured cfg_endpoint, and the message is dropped when neither is known. CONFIG_WIREGUARD is marked experimental and is not enabled by default. |
| Google::Auth versions from 0.11 through 0.12 for Perl accept an authorization code from any local process because the gcloud-auth login callback does not check the OAuth state.
The gcloud-auth login and application-default login commands send a state parameter with the authorization request, then take the code from the first request to reach their loopback listener without comparing the returned state.
A local attacker can submit an authorization code for their own Google account. The CLI exchanges it and stores the refresh token as the user's credentials, so the user's tools then act as the attacker's account. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: validate packet source for connected sockets
vmci_transport_recv_stream_cb() looks up sockets first by the full source
and destination tuple, then by destination only in the bound table. The
fallback can select a non-listening socket without checking whether the
packet came from its stored peer.
This was reproduced with two VMCI contexts. A RST from the context not
stored in a TCP_SYN_SENT socket reset that socket after it was selected by
the destination-only lookup.
VMCI can process notification packets in bottom-half context when the
socket is not owned by user context, or defer packets to a workqueue. Use
vsock_check_source() after taking the socket lock in the bottom-half path,
and recheck after lock_sock() in the workqueue path. Listening sockets
continue to accept packets from any source.
Reply with a RST addressed from the received packet before dropping a
source that fails validation. This preserves the existing reset behavior
for bound non-listening and concurrently closed sockets without directing
the reset to a connected socket's stored peer. |
| A vulnerability was identified in rathena FluxCP up to 98cd4b8fd83228c11b36fb3d097b8e0f7c105a8d. This issue affects the function verifyiprange of the file lib/Flux/PaymentNotifyRequest.php of the component PayPal IPN Handler. The manipulation of the argument X-Real-IP leads to origin validation error. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| vLLM is an inference and serving engine for large language models. Prior to 0.32.0, the OpenAI-compatible server configures Starlette CORSMiddleware with allowed_origins set to a wildcard by default. A malicious web page can use a victim's browser to reach an unauthenticated vLLM server on localhost, an internal network, or a VPN, call endpoints including GET /v1/models and POST /v1/chat/completions, consume GPU resources, and read responses. Cookie-based cross-site request forgery does not apply because credentials are disabled by default, and deployments requiring bearer authentication are exposed only when the caller already has a usable token. This issue is fixed in version 0.32.0. |
| Transmission 4.0.0 before 4.1.3 contains a permissive CORS vulnerability in handle_request() in rpc-server.cc that exposes the X-Transmission-Session-Id anti-CSRF token to any web origin. Malicious web pages can read the token from the 409 handshake response and replay it to issue RPC calls, enabling script-torrent-done execution, download-dir changes, or torrent and data deletion. |
| Origin Validation Error Vulnerability in HiRDB.
This issue affects HiRDB Server Version 10: from 10-00 before 10-12-01; HiRDB Server Version 9: from 09-00 through 09-66-22; HiRDB Server with Additional Function Version 9: from 09-00 through 09-66/V; HiRDB Server Version 9(32): from 09-02 through 09-66-22; HiRDB Server with Additional Function Version 9(32): from 09-00 through 09-66-/V. |
| Ladybird is a truly independent web browser. Prior to the c0d68bddf3e3616e5173835f0f4c155ee9700d91 commit, CSSStyleSheet.cssRules, insertRule(), and deleteRule() in Libraries/LibWeb/CSS/CSSStyleSheet.cpp did not enforce the stylesheet origin-clean flag with the required SecurityError, even though cross-origin imported stylesheets were correctly marked non-origin-clean. A malicious page could read parsed rules from a stylesheet loaded without CORS and could insert or delete rules in the victim stylesheet, bypassing the Same-Origin Policy. Reading could expose selectors, generated content, feature markers, or other sensitive rule text, while mutation could alter page visibility or layout. The issue does not provide memory corruption, code execution, or persistence after the attacker page closes. This vulnerability is fixed by commit c0d68bddf3e3616e5173835f0f4c155ee9700d91. |
| WIT SynApps Runtime through 1.4.11 contains a browser-mediated cross-origin request forgery vulnerability that allows attackers to supply an arbitrary target address during controller onboarding, causing the victim's browser to issue discovery requests to attacker-specified hosts at paths such as /easy/GUI/Skins/Default/SiteLogo and /easy/GUI/Skins/Default/Identity. Attackers can leverage the victim's browser reachability to probe loopback addresses, local hostnames, or internal-only network hosts and initiate the enrollment flow against REDY instances, crossing IT/OT segmentation boundaries through a sanctioned application path. |
| A flaw was found in Spacewalk Java site packages. This cross-site request forgery (CSRF) vulnerability allows a remote attacker to hijack the authentication of arbitrary users. This can lead to unauthorized actions, including disabling user accounts, adding new user accounts, or escalating privileges by modifying existing user accounts to have administrator access. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject userspace cifs.idmap descriptions
cifs.idmap key descriptions carry authority-bearing fields (owner and
group SIDs and uid/gid values in "os:"/"gs:"/"oi:"/"gi:" form) that the
cifs.idmap upcall helper treats as kernel-originating inputs. Unlike
its sibling cifs.spnego, the cifs.idmap key type has no vet_description
hook, so userspace can create keys of this type through
request_key(2)/add_key(2) and supply those fields without CIFS origin.
A request_key(2) call with a non-NULL callout then drives a root
usermodehelper upcall (/sbin/request-key -> cifs.idmap) that consumes
the unvetted description in root context.
Only accept cifs.idmap descriptions while CIFS is using its private
root_cred to request the key. id_to_sid()/sid_to_id() already run
under override_creds(root_cred), so the kernel-originated path is
unaffected.
This mirrors commit 3da1fdf4efbc ("smb: client: reject userspace
cifs.spnego descriptions"), which applied the same restriction to
cifs.spnego. |
| CakePHP through 5.4.3 contains an improper cookie domain validation vulnerability in the Http Client CookieCollection that allows malicious servers to receive and plant cookies by abusing unanchored suffix matching. Attackers controlling a host such as one ending in a victim domain suffix, or sending Set-Cookie Domain values for unrelated hosts, can steal session cookies or inject cookies into shared client cookie jars. |
| Same-origin policy bypass in the Address Bar component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| Fiber is an Express inspired web framework written in Go. From 2.52.1 until 2.52.3, the CORS middleware's validateDomain wildcard matcher in middleware/cors/utils.go strips the scheme and checks only a host suffix without requiring a dot boundary. An application configured with a wildcard-subdomain AllowOrigins value and AllowCredentials enabled can reflect an unrelated attacker-controlled origin whose host merely ends with the configured base domain. A user who visits that origin can expose authenticated cross-origin responses to the attacker's page; empty-label origins and later comma-space parsing hardening are outside this advisory. This issue is fixed in version 2.52.3. |
| A flaw was found in RESTEasy's CorsFilter, which, when configured to allow all origins ("*"), reflects the request's Origin header back in the Access-Control-Allow-Origin response together with Access-Control-Allow-Credentials: true. This permissive cross-origin policy allows a malicious website to make credentialed cross-origin requests and read authenticated responses from a victim's session, resulting in a loss of confidentiality. |
| Echo is a Go web framework. From 4.0.0 until 5.4.0, the Proxy middleware can preserve an attacker-supplied X-Real-IP header and forward it to an upstream service when Echo.IPExtractor is not configured. A remote client can therefore make upstream services receive a spoofed client address, undermining IP-based access controls, rate limiting, audit logging, or geographic restrictions that trust Echo's forwarded identity. This issue is fixed in Echo 5.4.0. |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.names.dns.DNSDatagramProtocol accepts a UDP DNS response for a pending query when its 16-bit transaction ID matches but does not verify that the response came from the queried host and port. An attacker able to deliver a packet to the resolver's listening port with the correct transaction ID can inject a forged answer. The standard twisted.names.client.Resolver uses a new random source port for each query, increasing off-path attack complexity, while applications that reuse a DNSDatagramProtocol instance expose only the transaction-ID search space after the first query. A successful forgery can redirect hostname resolution and enable mail interception, server-side request forgery, or man-in-the-middle positioning. This issue is fixed in version 26.10.0rc1. |
| AnkiMCP is an Anki addon that implements an MCP server, enabling AI assistants to interact with the Anki flashcard application. Prior to version 0.21.0, `anki_mcp_server/mcp_server.py` globally disables FastMCP DNS-rebinding protection through `TransportSecuritySettings` with `enable_dns_rebinding_protection=False`, including for the default local Streamable HTTP listener. The defaults in `anki_mcp_server/config.py` enable `http_enabled` on `127.0.0.1:3141`, with an empty `http_path` selecting the root endpoint. No bearer token, API key, session secret, strict `Host` allowlist or strict `Origin` allowlist is enforced before `initialize`, `tools/list` and `tools/call` reach MCP dispatch. A victim who visits a malicious web page while Anki and the listener are running can have browser requests rebound to loopback, allowing the attacker to `initialize` MCP, enumerate tools, read the local collection, and perform enabled non-destructive note/deck creation or updates. The attacker needs neither LAN position nor a local process. Available operations depend on enabled tool filters; destructive tools are hidden unless `enabled_destructive_tools` is opted into, limiting deletion-level impact but not the exposed read/write operations. The reported harness confirms real MCP tool dispatch with substituted Anki bridge responses rather than demonstrating destructive changes to a real collection. Disabling protection for tunnels/proxies also disables it for the normal loopback configuration. This issue is fixed in version 0.21.0. |
| Happy DOM is a JavaScript implementation of a web browser without its graphical user interface. Prior to 20.14.6, Happy DOM's CookieContainer in src/cookie/CookieContainer.ts does not correctly validate or match Domain cookie attributes. It can accept a Domain unrelated to the origin setting the cookie, including a public suffix, and separately treats an unrelated suffix-sharing hostname as a match because cookieMatchesURL does not enforce a DNS-label boundary. In server-side rendering and prerendering applications that contact attacker-controlled origins and then make requests to a victim origin, these behaviors can plant and deliver a forged cookie, enabling cookie injection or session fixation. This issue is fixed in version 20.14.6. |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. From 1.20.0 until 1.21.1, the Angular DevTools background service worker accepts chrome.runtime.sendMessage runtime messages from untrusted web pages or third-party content scripts without adequately verifying the message source. An untrusted sender that obtains a valid randomized victim tabId can direct the extension to use chrome.debugger to attach to another browser tab and trigger Chrome DevTools Protocol breakpoints. This can display the debugging banner, pause JavaScript execution, and prevent interaction with the target tab, but it does not provide remote code execution, privilege escalation, or cross-origin access to memory or credentials. This issue is fixed in version 1.21.1. |
